The DDM4 V7 AR15 style firearm features M-LOK attachment technology with the Daniel Defense MFR 15.0 rail. Built around a Cold Hammer Forged, 16 inch barrel, the V7 has a DD improved Flash Suppressor to reduce flash signature. The mid-length gas system provides smooth and reliable cycling under any condition and reduces both perceived recoil and wear on moving parts. With the M-LOK attachment points that run along 7 positions and an uninterrupted 1913 Picatinny rail on top, the V7 has plenty of room for the sights, optics, and accessories the user may require. The independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters. This rifle also comes with the ergonomic Daniel Defense Buttstock and Pistol Grip.
MATERIALS & CONSTRUCTION
LOWER RECEIVER Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
UPPER RECEIVER Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
BARREL Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 16″ Government Profile, Mid-length Gas System, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
GAS SYSTEM Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement
MUZZLE DEVICE Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
BOLT CARRIER GROUP M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
BUFFER H Buffer
SIGHTS Sold Separately
HANDGUARD Daniel Defense MFR 15.0, CNC Machined of 6061-T6 Aluminum, M-LOK Attachment, Type III Hard Coat Anodized
CHARGING HANDLE GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized
RECEIVER EXTENSION 6 Position Mil-Spec 7075-T6 Aluminum
BUTTSTOCK Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
PISTOL GRIP Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
Made in the USA
FEATURES
MUZZLE DEVICE Improved design reduces flash signature compared to the traditional A2 birdcage for AR15 style firearms
COLD-HAMMER FORGED BARREL Intense hydraulic pressure process that forms the most accurate and longest-lasting barrels attainable
FLARED MAGAZINE WELL Widened and beveled magwell funnels magazines into place for the fastest, most secure reloads possible
AMBI SAFETY SELECTOR For right or left-handed shooters
FREE FLOAT RAIL SYSTEM Proprietary 4- or 6-bolt attachment to the upper receiver allows the rail system to free float the barrel, which will ensure barrel harmonics are not affected during operation
BUTTSTOCK Features a nonslip cheek weld, interchangeable butt pads, and an integral QD point
QD POINTS Integrated quick-disconnect points for the attachment of slings
M-LOK Features M-LOK attachment technology
PISTOL GRIP Ergonomic wrist angle, integral trigger guard and nonslip grip for comfort and control in all conditions
SPECIFICATIONS
MOUNTING SYSTEM M-LOK
CALIBER 5.56mm NATO
MUZZLE THREAD 1 ⁄ 2 × 28 TPI (Threads Per Inch)
GAS SYSTEM Mid-length
BARREL LENGTH 16″
BARREL PROFILE Government
PRODUCT WEIGHT 6.2 LBS
LENGTH 32 1/4″ – 35 7/8”
MAGAZINE DD Magazine
CASE Daniel Defense Full-Latch Impact Plastic Case
Daniel Defense, DDM4V7, Semi-automatic Rifle, 223Rem/556NATO, 16″ Cold Hammer Forged Barrel, 1:7 Twist, Black, 32Rd, Daniel Defense Furniture, Daniel Defense Flash Suppressor, Daniel Defense MFR XS 15″ Handguard, 1-32Rd Daniel Defense Magazine
Reviews
There are no reviews yet.