$1,299.99
The LEGION P226 is finished in Cerakote® Elite LEGION gray coating, custom G-10 grips with a LEGION medallion, the SIG SAUER Electro-Optics X-RAY high visibility day/night sights comes with three magazines. The P226 in DA/SA includes a reduced and contoured Elite beavertail, which allows for a higher grip, but a reduced profile, thus eliminating printing. More aggressive front strap checkering and additional checkering under the trigger guard enhance the grip. An X-Five undercut has been applied to the trigger guard, allowing for a higher grip and greater control. Front cocking serrations provide greater purchase for cycling the action, clearing the firearm, or conducting press checks. The DA/SA is available in 9 mm. The DA/SA also features low profile decocking and slide catch levers to reduce the risk of snagging. An enhanced polished action with the SRT (Short-Reset Trigger) is augmented with a Grayguns, Inc. designed P-SAIT trigger. In addition, a solid steel guide rod adds weight where it matters most.
The P226 LEGION RX SAO variant brings the same feature set to the table in a single-action only package. The addition of the SIG Custom Works Flat Trigger provides an exceptional feel and consistent trigger pull regardless of finger placement. The SAO is available in 9mm.
This firearm is available both with or without a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
1 in stock
Weight | 3.85 lbs |
---|---|
Dimensions | 13.25 × 10 × 3.25 in |
UPC | 1239600000000 |
MPN | E26R-9-LEGION-SAO-R2 |
In 2011, B&T began work on a modernized H&K MP5 replacement, for while the MP5 has enjoyed a tremendous legacy, the platform is simply no longer compatible with the modern needs of its end users. Those needs include an updated manual of arms, improved shooter ergonomics, the ability to accept mission-critical electro-optics and, most importantly, […]
Quick Specs
Caliber: 9x19mm
Operation: Hydraulic Assisted Blowback
Mag Capacity: 10, 15, 20, 25, 30
Weight: 4.9lbs / 2.2kg
Barrel Length: 6.8 in / 175mm
The P365-380 offers all the same features as America’s #1 selling micro-compact pistol, now in the softer shooting 380 caliber resulting in easier handling and less felt recoil.
The long-awaited P365 chambered in 380 is finally here, creating a new, softer shooting, easier handling micro-compact option for everyday carry. It uses the same grip module and fire control unit as the popular 9mm version with a lightened slide and barrel making it completely compatible with all existing P365 holsters. With a Nitron® finished stainless slide, DLC barrel, and completely redesigned two-piece captured guide rod, the P365-380 is the most durable 380 micro-compact pistol on the market. Rigorously tested at SIG SAUER, the P365-380 was designed for all shooters, especially those with smaller hands and those who find the manipulation and recoil management of 9mm caliber pistols challenging.
Each P365-380 comes standard with SIGLITE® night sights for effective sight acquisition in all lighting conditions. The P365-380 slide includes an optic cut compatible with the ROMEOZero Elite or any optic with the same footprint. Additionally, the dovetailed front and rear sights allow for effective co-witnessing in the proper configuration. Because the P365-380 shares the same fire control unit and grip module as all standard P365s it is compatible with all of the same accessories, such as flat triggers, FOXTROT lights, X grip modules, etc. Each pistol includes (2) 10rd magazines (one flush fit and one extended) and a magazine loader standard. The P365-380 is the ultimate micro-compact pistol offering less recoil, less racking force, and less compromise in an everyday carry pistol.
Nitron® finished optic-ready slide
Shared FCU and grip module with P365 9mm
Less recoil and reduced racking force
Accessory rail
(2) 10rd magazines w/ mag loader
** PLEASE NOTE ** The P365-380 fits all standard P365 holsters.
This firearm is available both with or without a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
Connects to all 5.56 QDC Muzzle Devices. Available in Black and Flat Dark Earth (-BLK) (-FDE).
Specifications
Addition to Bare Muzzle: 3.85″ (9.78cm)
Addition to QDC 3-prong FH: 2.33″ (5.92cm)
Overall Length: 4.43″ (11.25cm)
Weight: 13.9oz (395g)
Sound Reduction: 12dB
KAC’s newest answer for a superior rifle suppressor 3D printed and incorporating their Pressure Reduction Technology (PRT)
KAC PN 119354-BLK & 119354-FDE
Connects to all 5.56 QDC Muzzle Devices. Available in Black and Flat Dark Earth (-BLK) (-FDE).
Specifications
Addition to Bare Muzzle: 3.85″ (9.78cm)
Addition to QDC 3-prong FH: 2.33″ (5.92cm)
Overall Length: 4.43″ (11.25cm)
Weight: 13.9oz (395g)
Sound Reduction: 12dB
Reviews
There are no reviews yet.