$1,299.99
The LEGION P226 is finished in Cerakote® Elite LEGION gray coating, custom G-10 grips with a LEGION medallion, the SIG SAUER Electro-Optics X-RAY high visibility day/night sights comes with three magazines. The P226 in DA/SA includes a reduced and contoured Elite beavertail, which allows for a higher grip, but a reduced profile, thus eliminating printing. More aggressive front strap checkering and additional checkering under the trigger guard enhance the grip. An X-Five undercut has been applied to the trigger guard, allowing for a higher grip and greater control. Front cocking serrations provide greater purchase for cycling the action, clearing the firearm, or conducting press checks. The DA/SA is available in 9 mm. The DA/SA also features low profile decocking and slide catch levers to reduce the risk of snagging. An enhanced polished action with the SRT (Short-Reset Trigger) is augmented with a Grayguns, Inc. designed P-SAIT trigger. In addition, a solid steel guide rod adds weight where it matters most.
The P226 LEGION RX SAO variant brings the same feature set to the table in a single-action only package. The addition of the SIG Custom Works Flat Trigger provides an exceptional feel and consistent trigger pull regardless of finger placement. The SAO is available in 9mm.
This firearm is available both with or without a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
1 in stock
Weight | 3.85 lbs |
---|---|
Dimensions | 13.25 × 10 × 3.25 in |
UPC | 1239600000000 |
MPN | E26R-9-LEGION-SAO-R2 |
The long-awaited SR-25 standalone complete lower receiver assembly is here!
These are built complete to the same exacting standards and specifications as those on complete SR-25 rifles. An ambidextrous bolt release, selector, and magazine release offer the left-handed user the ergonomic advantages inherent to AR15 based controls, as well as giving right-handed users alternate methods of manipulation to increase efficiency of movement. The Drop-In 2-Stage Trigger serves double duty as an aid to long range precision marksmanship while enabling surgical speed shooting at close range.
Marked “RIFLE 7.62 MM” and “SR 25”
Lower ships fully built with lower parts, HH buffer (PN 21057), action spring and trigger, but without stock.
When a suppressed weapon fires a large number of shots, the expanding gasses eject backwards towards the operator. This gas blowback is not only an annoyance, but also makes it more difficult for the operator to breathe and see. B&T’s RBS (Reduced Back Pressure) Suppressor Series was designed to counter this problem by minimizing gas blowback as well as reducing fouling. The RBS suppressor utilizes a unique low-pressure chamber to absorb a considerable amount of the expanding gasses, which in turn decreases the back pressure. In addition, RBS Suppressors are available in multiple calibers and configurations.
Features of the B&T RBS Suppressor:
Minimizes gas-blowback
Reduces fouling
Available in multiple calibers and configurations
The P220 LEGION is an enhanced version of the gun that started it all for modern day SIG. Finished in a proprietary LEGION gray coating and featuring custom G-10 grips with a LEGION medallion, the P220 LEGION is improved in nearly every way. The stainless-steel slide sports SIG SAUER Electro-Optics X-RAY high visibility day/night sights as well as front cocking serrations that provide greater purchase for cycling the action, clearing the firearm or conducting press checks.
The P220 in DA/SA includes a reduced and contoured Elite beavertail, which allows for a higher grip and a reduced profile, thus eliminating printing. More aggressive front strap checkering and additional checkering under the trigger guard enhance the grip. An X-Five undercut has been applied to the trigger guard, allowing for a higher grip and greater control. The P220 LEGION also features low-profile decocking and slide-catch levers to reduce the risk of snagging. An enhanced polished action with the SRT (Short-Reset Trigger) is augmented with a Grayguns, Inc. designed P-SAIT trigger. In addition, a solid steel guide rod adds weight where it matters most. The P220 LEGION ships with three 8-round magazines.
This firearm is equipped with a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
KAC’s newest answer for a superior rifle suppressor 3D printed and incorporating their Pressure Reduction Technology (PRT)
KAC PN 121567-BLK & 121567-FDE
Connects to all 5.56 QDC Muzzle Devices. Available in Black and Flat Dark Earth (-BLK) (-FDE).
Specifications
Addition to Bare Muzzle: 5.67″ (14.41cm)
Addition to QDC 3-prong FH: 4.15″ (10.55cm)
Overall Length: 6.25″ (15.88cm)
Weight: 19.2oz (545g)
Sound Reduction: 24dB
Regulations
This is a regulated item and requires shipment to a FFL/SOT holder. After you have placed your order, please have your order number and a copy of your preferred store’s FFL/SOT emailed to info@rooftopdefense.com to avoid delays. After I have received their FFL/SOT, I will file a Form 3. Upon approval, I will ship your order as soon as possible!
Reviews
There are no reviews yet.