This exclusive P365-XMACRO IWB BlackPoint Tactical holster has been designed to be a minimal appendix carry holster that can be easily reconfigured to be worn comfortably in any IWB, strong-side position. It features a concealment strut that acts as a lever on the holster against the inside of the belt, pressing the firearm’s grip into the body and aiding in concealment. Designed to be used with or without a ROMEOZero installed.
The concealment strut has built-in height adjustment allowing it to be moved to match the user’s belt height. The back of the concealment strut has channels to capture the hardware which aids in the height adjustment. The holster ships with all the needed hardware so that the concealment strut can be removed while retaining the full functionality of the holster. This quick swap is recommended for users who wish to carry in a position other than appendix. Features an adjustable double-finger metal belt clip to prevent unwanted removal. The belt clip cant and ride height can be quickly modified by simply loosening the screws on the belt clip, adjusting the clip position, and tightening. This provides the end-user with a wide range of adjustability so they can find the carry position most comfortable for them. This holster has a factory optic relief cut to allow the use of ROMEOZero where desired. The screws underneath the trigger guard allow the user to easily adjust the tension on the holster within a set range. The belt clip rides on a strong custom-formed Kydex wing for more comfortable carry, allowing the holster to flex just the right amount.
Specifications:
Draw Preference: Left
Brand: BlackPoint Tactical
Material: Composite
Model: P365-XMACRO
Belt Loop Size: 1.50 in
Out of stock
Weight | 0.6 lbs |
---|---|
Dimensions | 11 × 7 × 3 in |
UPC | 191107057940 |
MPN | HOL-365-APX-LH |
Pack of two Velcro-backed PVC patches of the KAC Crest. These rugged patches are available in three different color schemes and couple perfectly with any KAC Gear equipped with hook and loop fasteners. Size is approx. 2?
These rugged patches are available in three different color schemes and couple perfectly with any KAC Gear equipped with hook and loop fasteners. Size is approx. 2″ x 3″.
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel.
The URX 4 is currently available for 5.56 rifles in 8.5, 10, 10.75″, 13, and 14.5 lengths, and is equipped with Knights unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. The IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut. This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain.
A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knights Armament Company demonstrates its continuing determination to intelligently design effective products.
Two QD sling swivel sockets built in at the rear of the rail. Includes shim kit and installation wrench.
The KAC URX 4 Rail is a fully modular design that utilizes the revolutionary KeyMod accessory mounting system. The URX 4 Rail is stronger and more stable than previous URX designs due to its one piece construction. It is also lighter due to its Integral Barrel Nut (IBN) system of attachment. The IBN system allows the rail itself to act as the barrel nut when torqued onto the rifle, completely eliminating the need for a separate steel barrel nut. KeyMod accessories may be mounted anywhere along the URX 4s length, making it one of the most user configurable designs on the market. The URX 4 includes two QD sling swivel sockets, one on the left side and one on the right.
Specifications:
Length: 10.75″
Weight: 10.2 oz
Inside Diameter: 1.55″
Outside Diameter: 1.68″ (Side to Side)
Each URX 4 Rail comes complete with an installation wrench, shim kit and instructions. Other lengths available include 8.5″, 10″, 13″, and 14.5″.
Reviews
There are no reviews yet.