$1,999.99
The MPX Copperhead features a monolithic Elite Series Cerakote® finish upper receiver, with an integrated stock knuckle lower, and a 3.5” barrel with integrated muzzle brake.
Unconventional design, unmatched performance, and familiar AR handling. The SIG MPX redefines the submachine gun category with a new level of operator safety, in-field adaptability and proven reliability in the harshest environments. Completely ambidextrous, the SIG MPX is great for left- or right-handed shooters with its dual-sided selector switch, magazine release, charging handle and bolt release. The SIG MPX operates from a fully-closed and locked rotating bolt, offering enhanced reliability and safety in use. A short-stroke gas piston allows the SIG MPX to run all weights and brands of 9mm ammunition with no adjustments to the gas valve.
1 in stock
Weight | 9 lbs |
---|---|
Dimensions | 46 × 11 × 5 in |
UPC | 798681626427 |
MPN | PMPX-4B-CH-NB |
When a suppressed weapon fires a large number of shots, the expanding gasses eject backwards towards the operator. This gas blowback is not only an annoyance, but also makes it more difficult for the operator to breathe and see. B&T’s RBS (Reduced Back Pressure) Suppressor Series was designed to counter this problem by minimizing gas blowback as well as reducing fouling. The RBS suppressor utilizes a unique low-pressure chamber to absorb a considerable amount of the expanding gasses, which in turn decreases the back pressure. In addition, RBS Suppressors are available in multiple calibers and configurations.
Features of the B&T RBS Suppressor:
Minimizes gas-blowback
Reduces fouling
Available in multiple calibers and configurations
The P226 is the pistol that set the standard by which all other combat handguns are measured. Designed as SIG’s entrant in the military trials to replace the 1911, today the P226 is in use by the U.S. Navy SEALs, Federal agents, and numerous law enforcement agencies including the Texas Rangers, Ohio State Highway Patrol and the Michigan State Police to name a few. The exceptional ergonomics and balance make this full-size pistol easy to handle. Available in 9mm and new to 2024, optics ready standard out of the box
This firearm is not available with a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
Connects to all 7.62 QDC Muzzle Devices. Available in Black and Flat Dark Earth (-BLK) (-FDE).
Specifications
Addition to Bare Muzzle: 5.7″ (16cm)
Overall Length: 6.4″ (20.06cm)
Weight: 19.8oz (658g)
KAC’s Pressure Reduction Technology (PRT) Signature Reduction Device line blends the proven durability and acoustic performance of the previous generation of KAC suppressors with pressure reduction design.
These suppressors are specifically engineered to release the majority of the pressure contained in the device and bore prior to the operating system beginning extraction, which significantly reduces the negative effects of suppressor integration, and reduces felt recoil compared to a traditional suppressor with the same level of sound reduction.
Muzzle flash, and specifically first-round flash, has also been directly addressed and minimized with the PRT design. The Quick Disconnect (QDC) mounting method ensures reduced carbon-lock, as well as minimal but repeatable point of impact shift when transitioning between suppressed and unsuppressed configurations.
For interval maintenance, the PRT devices can be cleaned with commonly used bore solvents or ultrasonic tank cleaning with a water rinse.
The Knight’s Armament 5.56 QDC/CRS-PRT connects to all 5.56 QDC Muzzle Devices.
Addition to Bare Muzzle: 5.67? (14.41cm)
Addition to QDC 3-prong FH: 4.15? (10.55cm)
Overall Length: 6.25? (15.88cm)
Weight: 19.2oz (545g)
Sound Reduction: 24dB
Reviews
There are no reviews yet.