![KFA_2025_Classic Logo_Red [HIREZ-FINAL01]](https://kfarmory.com/wp-content/uploads/2025/06/KFA_2025_Classic-Logo_Red-HIREZ-FINAL01-1-scaled.png#117002){kind=logo}
Geissele Automatics 5.45mm Suppressor Alignment Gage
$125.00
Caliber: 5.45mm 17″ Length Manufactured from hardened steel that has been ground 0.002” under nominal bore diameter Outside diameter is finely finished and straight to 0.001” over its length Made in the U.S.A.
5 in stock
| Weight | 0.5 lbs |
|---|---|
| Dimensions | 18 × 1 × 1 in |
| UPC | 1338900000000 |
| MPN | 10-1345-F |
Related products
-
Trijicon® HD XR™ Night Sights – Glock Small Frames Front: Orange Outline / Green Tritium, Rear: Black Outline / Green Tritium
$183.00Trijicon, Tritium HD XR Night Sight, Fits Glock 42 and 43, Orange Front, 3 Dot Expanded field of view Enhanced front sight acquisition U notch rear sight Tritium-Phosphor lamp Protective aluminum cylinders Sapphire window Silicone rubber cushion
-
KAC M4/M5 RAS Hardware Kit
The KAC Medium URX II free floating forend features an integral, flip-up front sight assembly that folds flush with the continuous top rail when not in use, creating a seamless look. Full length mil-spec M1913 Picatinny rails are located at the 3-, 6-, and 9 o’clock positions, making the URX II compatible with any number of rail-mounted tactical accessories. Includes three KAC 11 Rib Rail Panels.
Kit Contents
(1x) Rear Handguard Clamp
(1x) Rear Clamp Screw
(1x) Rear Clamp Screw Retainer
(1x) Rear Clamp Roll Pin
-
KAC Keymod Wire Management Panel Kit, URX 4, Flat Dark Earth (FDE)
$20.11The KAC Keymod Flat Panel Kit includes a set of 2 – 5.5 polymer rail panels and one short switch pocket. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. The long panels have 3 cable channels to help with switch cable routing. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black or FDE
Panel Length: 5.5″
Material: Polymer
Model: P/N:31560-BLK, 31560-FDE
Manufactured by: Knight’s Armament Company
*Note: FDE is designed to match Magpul FDE -
Knight’s Armament Company 30mm Scope Mt Black 1.5″
This KAC 30mm 1-Piece Scope Mount is constructed of lightweight aluminum and is compatible with any Picatinny-type top rail. It is the scope mount that was developed for use in the M110 SASS rifle package. Attaches via a pair of 1/2? bolts. Available in Black or Taupe.
Ring Size: 30mm
Ring Height: 1.5?
Material: Aluminum
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
Reviews
There are no reviews yet.