-
B&T 5.56 SF Titanium HUB Adapter
$355.00The Rotex-SF HUB is fully compatible with all 1.375x24TPI “HUB” compatible suppressors on the market today and is constructed of Titanium and stainless steel components. This HUB is compatible with all B&T Rotex flash hiders, as well as all SureFire SOCOM flash hiders, muzzle brakes and WarComp hybrid muzzle devices. The HUB is simply threaded into compatible suppressors and snugged up with a spanner wrench. HUB assemblies can be semi-permanently attached using Rocksett or other thread locking compounds should the end user desire. The Rotex-SF HUB ships standard with all Rotex and SRBS rifle suppressors.
Fully HUB Compatible (1.375x24TPI)
Constructed of Titanium and Stainless Steel
B&T Rotex Flash Hider and SureFire SOCOM Muzzle Device compatible
One-Hand Mounting System
5.56x45mm Compatible
Not Compatible with the SFA2-556 SF Muzzle Device -
KAC SUPPRESSOR SHROUD 7.62mm CRS FDE
$236.25A protective sleeve designed to fit over a firearm suppressor, primarily to shield the shooter from the intense heat generated during firing, preventing burns and reducing the visual distortion caused by heat waves (“mirage”) that can affect sight picture.
-
KAC SUPPRESSOR SHROUD 7.62mm CRS Black
$236.25A protective sleeve designed to fit over a firearm suppressor, primarily to shield the shooter from the intense heat generated during firing, preventing burns and reducing the visual distortion caused by heat waves (“mirage”) that can affect sight picture.
-
KAC Suppressor Shroud 7.62mm Cqb Black
$224.44A protective sleeve designed to fit over a firearm suppressor, primarily to shield the shooter from the intense heat generated during firing, preventing burns and reducing the visual distortion caused by heat waves (“mirage”) that can affect sight picture.
-
KAC Shroud 5.56mm 6″ FDE
$224.44A protective sleeve designed to fit over a firearm suppressor, primarily to shield the shooter from the intense heat generated during firing, preventing burns and reducing the visual distortion caused by heat waves (“mirage”) that can affect sight picture.
-
KAC Suppressor Shroud, 7.62, CQB, FDE
$224.44KAC’s suppressor shroud for their 762QDC/CRS-PRT suppressor
Available in Black and Flat Dark Earth. -
SilencerCo SCO15 UPPER RECEIVER
$219.00What’s more American than building out your own AR-15 rifle?
The SCO15 Upper Receiver features the SilencerCo logo, and is perfect for pairing with the SCO15 Lower Receiver.
Precision machined from billet 7075 aluminum and finished in type III hardcoat anodize.
Features a mil-spec 1913 picatinny rail and M4 feed ramps.
Compatible with mil-spec forward assists and dust covers (not included in purchase).
*Lower receiver is not included.
*Upper Finish disclaimer: SilencerCo uppers are finished with Type 3 hardcoat anodize, this process forms an extremely hard, abrasion resistant finish. While this finish provides superior results, it can cause some variance in the finish color. SilencerCo can’t guarantee that a SCO-15 Lower will be an exact match with a SilencerCo upper. Color variations are not covered under warranty.
-
Surefire 7.62 M14 SOCOM 3 Prong Flash Hider Suppressor Adapter
$199.00Three-prong flash hiders with SureFireâs renowned performance and durability
Typically reduces more than 99% muzzle flash
Multiple bearing surfaces for accurate suppressor alignment
Cover Your Position. SureFire’s advanced SF3P three-prong flash hiders deliver superior performance with a patented design that greatly reduces muzzle flash — typically more than 99%. Available for use with a variety of rifle calibers and muzzle thread specs, they are precision machined from U.S. mill-certified heat-treated stainless steel bar stock and DLC-coated to resist erosion for consistent high performance. SF3P flash hiders feature robust tines built to withstand the rigors of combat, and every SF3P is carefully inspected for concentricity and alignment, ensuring a rock-solid mounting surface for SureFire SOCOM Series Fast-Attach® suppressors. -
Surefire 5.56 AUG SOCOM 3 Prong Flash Hider Suppressor Adapter
Three-prong flash hiders with SureFireâs renowned performance and durability
Typically reduces more than 99% muzzle flash
Multiple bearing surfaces for accurate suppressor alignment
Cover Your Position. SureFire’s advanced SF3P three-prong flash hiders deliver superior performance with a patented design that greatly reduces muzzle flash — typically more than 99%. Available for use with a variety of rifle calibers and muzzle thread specs, they are precision machined from U.S. mill-certified heat-treated stainless steel bar stock and DLC-coated to resist erosion for consistent high performance. SF3P flash hiders feature robust tines built to withstand the rigors of combat, and every SF3P is carefully inspected for concentricity and alignment, ensuring a rock-solid mounting surface for SureFire SOCOM Series Fast-Attach® suppressors. -
Surefire 7.62 SR25 SOCOM 3 Prong Flash Hider Suppressor Adapter
$199.00Three-prong flash hiders with SureFireâs renowned performance and durability
Typically reduces more than 99% muzzle flash
Multiple bearing surfaces for accurate suppressor alignment
Cover Your Position. SureFire’s advanced SF3P three-prong flash hiders deliver superior performance with a patented design that greatly reduces muzzle flash — typically more than 99%. Available for use with a variety of rifle calibers and muzzle thread specs, they are precision machined from U.S. mill-certified heat-treated stainless steel bar stock and DLC-coated to resist erosion for consistent high performance. SF3P flash hiders feature robust tines built to withstand the rigors of combat, and every SF3P is carefully inspected for concentricity and alignment, ensuring a rock-solid mounting surface for SureFire SOCOM Series Fast-Attach® suppressors. -
Surefire WARCOMP Flash Hider / Suppressor Adapter
$199.00The world’s most shootable flash hider design
Patent-pending design provides more than 98% flash elimination; virtually eliminates muzzle rise
Precision-machined and DLC-coated for high performance and long service life
Choose The Best Of Both Worlds. Flash hider? Muzzle brake? The proprietary design of SureFire’s WARCOMP flash hiders/suppressor adapters provides the best attributes of both devices. WARCOMPs deliver superior flash reduction and significantly reduce muzzle rise, helping to conceal your location, preserve your dark-adapted vision and keep you on target for faster follow-up shots. They effectively eliminate more than 98% of all muzzle flash, even on short-barreled rifles, and their port direction can be optimized for virtually any shooting style. Precision machined from U.S. mill-certified, heat-treated stainless steel bar stock, every WARCOMP includes high-precision single-point cut barrel threads for optimum thread interface. DLC coating provides maximum protection under harsh environmental conditions and facilitates cleaning even after extreme use. Surefire WARCOMPs are the best suppressor adapters in the world. Period. -
Surefire SOCOM 4-Prong Flash Hider Suppressor Adapter
The exact flash hider that helped create the SureFire SOCOM legacy
Significantly reduces muzzle flash compared to a bare muzzle
Multiple bearing surfaces provide superior suppressor alignment
Always Choose SureFire. Our FH556RC-1/2-28 SOCOM 4-Prong Flash Hider for 5.56 mm weapon platforms is the exact flash hider that SureFire developed to dominate the most rigorous suppressor trial in military history and earn the USSOCOM suppressor contract, and our FH762RC-5/8-24 delivers the same level of performance and durability for 7.62 mm/.308 caliber rifles. Their four-tine design significantly reduces muzzle flash — typically greater than 99% compared to a bare muzzle — delivering extreme signature reduction and rugged dependability. With multiple bearing surfaces that ensure proper suppressor alignment, these flash hiders also serve as a rock-solid mounting platform for any SureFire SOCOM Fast-Attach® suppressor. Precision-machined from U.S. mill-certified stainless-steel bar stock, and heat-treated for added strength, they are highly resistant to gas and particle erosion, so you can depend on them to provide years of faithful service. SureFire flash hiders are individually inspected to ensure concentricity and alignment and covered by SureFire’s No-Hassle Guarantee. -
Surefire 7.62 M240 SOCOM 3 Prong Flash Hider Suppressor Adapter
$179.00Three-prong flash hiders with SureFireâs renowned performance and durability
Typically reduces more than 99% muzzle flash
Multiple bearing surfaces for accurate suppressor alignment
Cover Your Position. SureFire’s advanced SF3P three-prong flash hiders deliver superior performance with a patented design that greatly reduces muzzle flash — typically more than 99%. Available for use with a variety of rifle calibers and muzzle thread specs, they are precision machined from U.S. mill-certified heat-treated stainless steel bar stock and DLC-coated to resist erosion for consistent high performance. SF3P flash hiders feature robust tines built to withstand the rigors of combat, and every SF3P is carefully inspected for concentricity and alignment, ensuring a rock-solid mounting surface for SureFire SOCOM Series Fast-Attach® suppressors. -
Surefire WARCOMP-556-CTN-1/2-28 Closed-Tine Flash Hider
$152.00A closed-tine WARCOMP with legendary SureFire performance and durability
Reduces muzzle flash and muzzle rise
A rock-solid mount for SureFire SOCOM Fast-Attach® suppressors
Avoid Snags. If a traditional birdcage flash hider is what you want, SureFire’s WARCOMP-556-CTN significantly reduces muzzle flash with every shot fired and helps reduce muzzle rise for easier target tracking and faster follow-up shots. Its closed tines reduce the chance you’ll snag your barrel in environments where there is dense vegetation or other items that might catch an open-tine flash hider. Neutrally ported to aid in recoil management, it mimics that of a traditional birdcage flash hider while providing a rock-solid mounting option for SOCOM Series Fast-Attach® suppressors. Wrench flats machined into the sides of the adapter allow for easier installation. The WARCOMP-556-CTN delivers the performance and durability you can trust. -
SilencerCo THREADED BARREL Sig Sauer
$143.65All pistol suppressors require a threaded pistol barrel. SilencerCo noticed a market need for high quality pistol barrels and we stepped in to offer them. Holding to the same commitment to quality as all of our products, the threaded barrels are tough enough to hold up under the harshest conditions. Made of 416R stainless steel and finished in black nitride (some models remain stainless). For use with a pistol silencer, you will also need a piston (sold separately here)*
SilencerCo threaded barrels come with a Thread Protector.
Glock Barrel Compatibility: Our threaded barrels are compatible with the following Glock handgun generations:
G19: Gen 1-5, 19X, G45
G17: Gen 1-4 (not Gen 5)
G21: No Gen 5
G26: Gen 1-5
G34: Gen 1-4 (not Gen 5)
G43: G43 , G43X
Glock 43 piston compatibility: Due to the shorter threads on the Glock 43 barrel, it requires the use of the 1/2×28 SN piston (AC1756).SIG 320 barrel compatibility: Our barrels have been proven to work with these 320 models only:
P320 Full Size:
P320 RX Full-Size
P320 Nitron Full-SizeP320 Compact:
P320 RX Compact
P320 FDE Compact
P320 LIMA Compact
P320 Nitron Compact -
SilencerCo Sig P320 THREADED BARREL
$143.65All pistol suppressors require a threaded pistol barrel. SilencerCo noticed a market need for high quality pistol barrels and we stepped in to offer them. Holding to the same commitment to quality as all of our products, the threaded barrels are tough enough to hold up under the harshest conditions. Made of 416R stainless steel and finished in black nitride (some models remain stainless). For use with a pistol silencer, you will also need a piston (sold separately here)*
SilencerCo threaded barrels come with a Thread Protector.
Glock Barrel Compatibility: Our threaded barrels are compatible with the following Glock handgun generations:
G19: Gen 1-5, 19X, G45
G17: Gen 1-4 (not Gen 5)
G21: No Gen 5
G26: Gen 1-5
G34: Gen 1-4 (not Gen 5)
G43: G43 , G43X
Glock 43 piston compatibility: Due to the shorter threads on the Glock 43 barrel, it requires the use of the 1/2×28 SN piston (AC1756).SIG 320 barrel compatibility: Our barrels have been proven to work with these 320 models only:
P320 Full Size:
P320 RX Full-Size
P320 Nitron Full-SizeP320 Compact:
P320 RX Compact
P320 FDE Compact
P320 LIMA Compact
P320 Nitron Compact
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
