![KFA_2025_Classic Logo_Red [HIREZ-FINAL01]](https://kfarmory.com/wp-content/uploads/2025/06/KFA_2025_Classic-Logo_Red-HIREZ-FINAL01-1-scaled.png#117002){kind=logo}
HSGI Single-Point Drop Leg Multicam
$66.00
This small drop leg panel is designed for a wide range of MOLLE holsters and pouches. The back is lined with our signature neoprene padding for enhanced comfort and superior grip.
• Four columns x four rows of laser-cut, heavy-duty nylon laminate
• Neoprene back panel provides grip and padding
• Adjustable elastic leg strap with integrated rubber gripper material
• Adjustable belt loop with heavy-duty 2″ side-release buckle
• Entire panel features edge binding
Covered by HSGI’s® Lifetime Warranty. Made in the USA.
1 in stock
Related products
-
HSGI COBRA® 1.75″ Rigger Belt Multicam Large
$203.00Sewn with strength and attention to detail, this belt is equipped with the proven quick-release COBRA® buckle and is available with a sewn-in or integrated D-ring. The interior loop fastener is designed to match up with our Sure-Grip® Padded Belts or ABM pouches to lock the belt or pouches into place.
• Constructed with two layers of 1.75″ Type 13 webbing
• Additional rigidity and stiffness are added with a proprietary adhesive before sewing
• Buckle color matches belt (IDR buckle is always black)*Use actual measurements and not pant size when picking your belt size*
Small – 28″-30″
Medium – 32″-34″
Large – 36″-38″
XL – 40″-42″
2X – 44″-46″
3X – 48″-50″Covered by HSGI’s® Lifetime Warranty. Made in the USA.
**HSGI’s® rigger belts are NOT labeled or certified for climbing or use as Life Saving Equipment. HSGI® will not be held responsible for any injuries or death for the misuse of any of our products.**
-
KAC M-LOK QD Mount, Low Profile
QD socket mount to move sling rearward on the handguard while maintaining the lowest possible profile.
-
KAC Keymod 7 Slot Rail Section
Keymod mounted, 7-slot MILSTD 1913 picatinny rail segment. Fits the KAC URX 4 or other Keymod-style rails.
This KAC Keymod Accessory Rail is 3.7″ in length and provides a 7 slot section of mil-spec M1913 Picatinny rail for the addition of tactical accessories. Designed specifically for the URX 4 handguard, this rail section is also compatible with any other rifle handguard that has a Keymod interface. Aluminum construction.
Specifications:
Overall Length: 3.7″
M1913 Picatinny Rail Slots: 7 -
KAC Keymod Wire Management Panel Kit, URX 4, Flat Dark Earth (FDE)
$20.11The KAC Keymod Flat Panel Kit includes a set of 2 – 5.5 polymer rail panels and one short switch pocket. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. The long panels have 3 cable channels to help with switch cable routing. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black or FDE
Panel Length: 5.5″
Material: Polymer
Model: P/N:31560-BLK, 31560-FDE
Manufactured by: Knight’s Armament Company
*Note: FDE is designed to match Magpul FDE
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
Reviews
There are no reviews yet.