![KFA_2025_Classic Logo_Red [HIREZ-FINAL01]](https://kfarmory.com/wp-content/uploads/2025/06/KFA_2025_Classic-Logo_Red-HIREZ-FINAL01-1-scaled.png#117002){kind=logo}
-
Trijicon® RMR® Type 2 Red Dot Sight 3.25 MOA Red Dot, Automatic LED Illuminated
HSGI: QLS Adapter plate
-
HSGI Operator Belt (1.75″) Micro Grip Belt Panel Small Multicam
$203.00The Operator COBRA® IDR 1.75″ Rigger Belt is a low-profile shooter’s belt designed to work with both MOLLE and belt-mounted gear. This two-belt system is overbuilt, like all HSGI® gear, to outlast the competition.
• Built with two layers of military-grade Type 13 nylon webbing
• Proprietary construction process provides additional rigidity and stiffness
• Features additional layer of 1.5″ webbing to form industry-standard columns of MOLLE for use with MOLLE pouches and holsters
• Double-needle binding along upper and lower edges of 1.5″ webbing for added durability
• Includes your choice of HSGI® Inner Belt or Micro Grip Belt Panel to mate with the Operator’s interior hook fastener
• Two-belt setup enables the easy donning and removal of belt
• Features patented COBRA® integrated D-ring buckle with matte black finish*Use actual measurements and not pant size when picking your belt size*
Belt sizes are based on production averages and may vary by approximately one inch in either direction due to the handmade nature of the product.
Small – 29″-31″
Medium – 32″-34″
Large – 35″-37″
XL – 40″-42″
2X – 44″-46″
3X – 48″-50″Size Chart
This product is member tested and recommended by the National Tactical Officers Association (NTOA).
Covered by HSGI’s® Lifetime Warranty. Made in the USA.
**HSGI’s® rigger belts are NOT labeled or certified for climbing or use as Life Saving Equipment. HSGI® will not be held responsible for any injuries or death for the misuse of any of our products.**
-
HSGI Operator Belt (1.75″) Micro Grip Belt Panel XL Multicam
$203.00The Operator COBRA® IDR 1.75″ Rigger Belt is a low-profile shooter’s belt designed to work with both MOLLE and belt-mounted gear. This two-belt system is overbuilt, like all HSGI® gear, to outlast the competition.
• Built with two layers of military-grade Type 13 nylon webbing
• Proprietary construction process provides additional rigidity and stiffness
• Features additional layer of 1.5″ webbing to form industry-standard columns of MOLLE for use with MOLLE pouches and holsters
• Double-needle binding along upper and lower edges of 1.5″ webbing for added durability
• Includes your choice of HSGI® Inner Belt or Micro Grip Belt Panel to mate with the Operator’s interior hook fastener
• Two-belt setup enables the easy donning and removal of belt
• Features patented COBRA® integrated D-ring buckle with matte black finish*Use actual measurements and not pant size when picking your belt size*
Belt sizes are based on production averages and may vary by approximately one inch in either direction due to the handmade nature of the product.
Small – 29″-31″
Medium – 32″-34″
Large – 35″-37″
XL – 40″-42″
2X – 44″-46″
3X – 48″-50″Size Chart
This product is member tested and recommended by the National Tactical Officers Association (NTOA).
Covered by HSGI’s® Lifetime Warranty. Made in the USA.
**HSGI’s® rigger belts are NOT labeled or certified for climbing or use as Life Saving Equipment. HSGI® will not be held responsible for any injuries or death for the misuse of any of our products.**
-
HSGI COBRA® 1.75″ Rigger Belt Multicam Large
$203.00Sewn with strength and attention to detail, this belt is equipped with the proven quick-release COBRA® buckle and is available with a sewn-in or integrated D-ring. The interior loop fastener is designed to match up with our Sure-Grip® Padded Belts or ABM pouches to lock the belt or pouches into place.
• Constructed with two layers of 1.75″ Type 13 webbing
• Additional rigidity and stiffness are added with a proprietary adhesive before sewing
• Buckle color matches belt (IDR buckle is always black)*Use actual measurements and not pant size when picking your belt size*
Small – 28″-30″
Medium – 32″-34″
Large – 36″-38″
XL – 40″-42″
2X – 44″-46″
3X – 48″-50″Covered by HSGI’s® Lifetime Warranty. Made in the USA.
**HSGI’s® rigger belts are NOT labeled or certified for climbing or use as Life Saving Equipment. HSGI® will not be held responsible for any injuries or death for the misuse of any of our products.**
-
HSGI Single-Point Drop Leg Warrior Combo SIG P320X Right Hand Coyote Brown
$161.00This combo ships already assembled, mounting the popular Warriorâ„¢ Holster to our Single-Point Drop Leg Platform.
This small drop leg panel is designed for a wide range of MOLLE holsters and pouches. The back is lined with our signature neoprene padding for enhanced comfort and superior grip.
• 4 columns x 4 rows of laser-cut, heavy-duty nylon laminate
• Neoprene back panel provides grip and padding
• Adjustable elastic leg strap with integrated rubber gripper material
• Adjustable belt loop with heavy-duty 2″ side-release buckle
• Entire panel features single-needle edge bindingThe Warrior™ Holster is an adjustable, low profile, tactically-oriented holster. Easily accessible and designed for a smooth, fast draw, this holster is perfect for open carry or range use.
• Made of 100% aircraft-grade Kydex®, which gives a smooth finish for easy draw and reholster
• Holster fit can be tightened or loosened through retention screw
• Stealth footprint with thin, streamlined design for low profile
• All Kydex® construction provides smooth, fast draws and an easy reholster
• Open ended and optics ready for threaded barrels and suppressor sightsDisclaimer: *The holster is a Comp-Tac® product and may not be Berry Compliant.*
Disclaimer: Comp-Tac® products are constructed to fit standard factory equipped guns only. Additions such as trigger shoes, extended slide releases, laser sights or any alteration to the frame or external dimensions of the gun itself may render the holster unsafe and increase the risk of an accidental discharge. At no time should a handgun other than the make and models of gun for which the holster is made be used in a Comp-Tac® holster. It is the user’s sole responsibility throughout the serviceable life of the holster to personally check for proper fit and retention with an unloaded handgun. If any Comp-Tac® product becomes worn, loose or ill-fitting with age, you should cease use immediately. Because HSGI® and Comp-Tac® have no control over how their holsters and/or accessories will be used, or who they will be used by after their purchase, we disclaim any and all liability for incidental or consequential damages to person(s) and/or property resulting from the use of any HSGI® or Comp-Tac® product, including wear on firearm finish.
-
HSGI X2R® TACO® Shingle Multicam Black
$138.00This MOLLE shingle will keep up to six rifle magazines secure and readily available. The three X2R® TACO® pouches are permanently secured to a laser-cut laminate base, ensuring easy and stable mounting on any PALS platform, such as vests, plate carriers and battle belts. Each X2R® TACO® can hold almost any combination of rifle magazine, HSGI® Shot Shell Tray, flashbang and many other similar sized items.
• Securely holds most rifle magazines
• Magazines deploy easily and silently on demand
• Strip of loop fastener sewn inside each pouch for additional contact and gripCovered by HSGI’s® Lifetime Warranty. Made in the USA.
Four HSGI® Clips included.
-
HSGI Laser Sure-Grip® Padded Belt – Slotted XL Multicam
$129.00This new version is of our modular padded belt system is constructed with a laser-cut, proprietary heavy-duty nylon laminate. This belt’s slotted design allows inner belts to be woven under and over the MOLLE panels, making it compatible with both MOLLE and belt-mounted pouches and holsters. Our proprietary neoprene padding adds comfort while offering excellent grip and performance. The rear features an extra row of laser-cut MOLLE for larger pouches and additional comfort.
• Neoprene padding provides a “gel-like” comfort and unsurpassed grip
• Additional row of laser-cut PALS on wide back panel for comfort and larger pouches
• Individual laser-cut PALS panels allow the innerbelt to be woven inside or outside of the PALS to satisfy user needs for MOLLE mounting or belt mounting holsters and other accessories
• Assembled with an HDPE stiffener for added stabilityCovered by HSGI’s® Lifetime Warranty. Made in the USA.
-
HSGI Sure-Grip® Padded Belt – Slotted Medium Multicam
$129.00This modular padded belt system adds versatility to one of the slimmest and sturdiest on the market. All the performance of our original system.
• 0.75″ thick and 4.25″ tall
• Neoprene padding creates a “gel like comfort”
• Adds a level of grip that is unlike any other belt system on the market
• Individual PALS platforms allow the inner belt to be woven inside or outside of the PALS to satisfy user needs for MOLLE mounting or belt mounting for holsters and other accessories.
• Four suspender attachments are positioned strategically if suspenders are needed
• Assembled with a removable HPDE stiffener to add stabilityCovered by HSGI’s® Lifetime Warranty. Made in the USA.
IF YOU WISH TO ORDER A RIGGER BELT TO MATE WITH THE SGPB, YOU MUST SELECT IT AS AN OPTION WHEN ORDERING. PLEASE BE CAREFUL AND DELIBERATE WHEN SELECTING THE SURE-GRIP® PADDED BELT SIZE VS. THE RIGGER BELT SIZE
TO ACCURATELY DETERMINE THE PROPER SIZE PADDED BELT, TAKE THESE STEPS.
FIRST, DETERMINE THE SIZE GAP YOU WANT IN FRONT BETWEEN ENDS OF THE BELT. MANY PEOPLE PREFER AS LITTLE GAP AS POSSIBLE TO OFFER MORE MOLLE REAL ESTATE TOWARD THE FRONT.
ONCE YOU HAVE THIS DECIDED, TAKE A TAPE MEASURE AROUND YOUR WAIST WHILE WEARING YOUR EVERYDAY BELT. DO NOT BASE YOUR BELT MEASUREMENT ON YOUR PANT SIZE.
FINALLY, SUBTRACT THE GAP YOU WANT FROM THE WAIST MEASUREMENT. ORDER THE PADDED BELT CLOSEST TO THIS FINAL MEASUREMENT. IF YOU CHOOSE THE COBRA® BELT, YOU WILL NEED TO GO UP A FEW INCHES FROM YOUR STANDARD BELT SIZE TO ACCOMMODATE THE ADDED GIRTH CREATED BY PADDED BELT. IF YOU CHOOSE THE DUTY BELT, PLEASE CHOOSE THE CLOSEST WAIST SIZE TO THE LENGTH OF PADDED BELT CHOSEN.Belt sizes are based on production averages and may vary by approximately one inch in either direction due to the handmade nature of the product.
Below is the total length of the SGPB for sizing:
30.75″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is Medium
37.5″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is Large
42.5″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is XL
46″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is 2X -
HSGI Sure-Grip® Padded Belt – Slotted Mulit-Cam Small
$129.00This modular padded belt system adds versatility to one of the slimmest and sturdiest on the market. All the performance of our original system.
• 0.75″ thick and 4.25″ tall
• Neoprene padding creates a “gel like comfort”
• Adds a level of grip that is unlike any other belt system on the market
• Individual PALS platforms allow the inner belt to be woven inside or outside of the PALS to satisfy user needs for MOLLE mounting or belt mounting for holsters and other accessories.
• Four suspender attachments are positioned strategically if suspenders are needed
• Assembled with a removable HPDE stiffener to add stabilityCovered by HSGI’s® Lifetime Warranty. Made in the USA.
-
HSGI Sure-Grip® Padded Belt – Slotted Small Coyote Brown
$129.00This modular padded belt system adds versatility to one of the slimmest and sturdiest on the market. All the performance of our original system.
• 0.75″ thick and 4.25″ tall
• Neoprene padding creates a “gel like comfort”
• Adds a level of grip that is unlike any other belt system on the market
• Individual PALS platforms allow the inner belt to be woven inside or outside of the PALS to satisfy user needs for MOLLE mounting or belt mounting for holsters and other accessories.
• Four suspender attachments are positioned strategically if suspenders are needed
• Assembled with a removable HPDE stiffener to add stabilityCovered by HSGI’s® Lifetime Warranty. Made in the USA.
IF YOU WISH TO ORDER A RIGGER BELT TO MATE WITH THE SGPB, YOU MUST SELECT IT AS AN OPTION WHEN ORDERING. PLEASE BE CAREFUL AND DELIBERATE WHEN SELECTING THE SURE-GRIP® PADDED BELT SIZE VS. THE RIGGER BELT SIZE
TO ACCURATELY DETERMINE THE PROPER SIZE PADDED BELT, TAKE THESE STEPS.
FIRST, DETERMINE THE SIZE GAP YOU WANT IN FRONT BETWEEN ENDS OF THE BELT. MANY PEOPLE PREFER AS LITTLE GAP AS POSSIBLE TO OFFER MORE MOLLE REAL ESTATE TOWARD THE FRONT.
ONCE YOU HAVE THIS DECIDED, TAKE A TAPE MEASURE AROUND YOUR WAIST WHILE WEARING YOUR EVERYDAY BELT. DO NOT BASE YOUR BELT MEASUREMENT ON YOUR PANT SIZE.
FINALLY, SUBTRACT THE GAP YOU WANT FROM THE WAIST MEASUREMENT. ORDER THE PADDED BELT CLOSEST TO THIS FINAL MEASUREMENT. IF YOU CHOOSE THE COBRA® BELT, YOU WILL NEED TO GO UP A FEW INCHES FROM YOUR STANDARD BELT SIZE TO ACCOMMODATE THE ADDED GIRTH CREATED BY PADDED BELT. IF YOU CHOOSE THE DUTY BELT, PLEASE CHOOSE THE CLOSEST WAIST SIZE TO THE LENGTH OF PADDED BELT CHOSEN.Belt sizes are based on production averages and may vary by approximately one inch in either direction due to the handmade nature of the product.
Below is the total length of the SGPB for sizing:
30.75″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is Medium
37.5″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is Large
42.5″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is XL
46″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is 2X -
HSGI Laser Slim-Grip® Padded Belt – Slotted Black XL
$122.00This new version is of our modular padded belt system is constructed with a laser-cut, proprietary heavy-duty nylon laminate. This belt’s slotted design allows inner belts to be woven under and over the MOLLE panels, making it compatible with both MOLLE and belt-mounted pouches and holsters. Our proprietary neoprene padding adds comfort while offering excellent grip and performance. The rear features an extra row of laser-cut MOLLE for larger pouches and additional comfort.
• Neoprene padding provides a “gel-like” comfort and unsurpassed grip
• Additional row of laser-cut PALS on wide back panel for comfort and larger pouches
• Individual laser-cut PALS platforms allow the innerbelt to be woven inside or outside of the PALS to satisfy user needs for MOLLE mounting or belt mounting holsters and other accessories
• Assembled with an HDPE stiffener for added stabilityCovered by HSGI’s® Lifetime Warranty. Made in the USA.
-
HSGI Laser Sure-Grip® Padded Belt – Slotted XL Multicam Black
This new version is of our modular padded belt system is constructed with a laser-cut, proprietary heavy-duty nylon laminate. This belt’s slotted design allows inner belts to be woven under and over the MOLLE panels, making it compatible with both MOLLE and belt-mounted pouches and holsters. Our proprietary neoprene padding adds comfort while offering excellent grip and performance. The rear features an extra row of laser-cut MOLLE for larger pouches and additional comfort.
• Neoprene padding provides a “gel-like” comfort and unsurpassed grip
• Additional row of laser-cut PALS on wide back panel for comfort and larger pouches
• Individual laser-cut PALS panels allow the innerbelt to be woven inside or outside of the PALS to satisfy user needs for MOLLE mounting or belt mounting holsters and other accessories
• Assembled with an HDPE stiffener for added stabilityCovered by HSGI’s® Lifetime Warranty. Made in the USA.
IF YOU WISH TO ORDER A COBRA® RIGGER BELT TO MATE WITH THE SURE-GRIP® PADDED BELT, YOU MUST SELECT IT AS AN OPTION WHEN ORDERING. PLEASE BE CAREFUL AND DELIBERATE WHEN SELECTING THE SURE-GRIP® PADDED BELT SIZE VS. THE RIGGER BELT SIZE
TO ACCURATELY DETERMINE THE PROPER SIZE PADDED BELT, TAKE THESE STEPS.FIRST, DETERMINE THE SIZE GAP YOU WANT IN FRONT BETWEEN ENDS OF THE BELT. MANY PEOPLE PREFER AS LITTLE GAP AS POSSIBLE TO OFFER MORE MOLLE REAL ESTATE TOWARD THE FRONT.
ONCE YOU HAVE THIS DECIDED, TAKE A TAPE MEASURE AROUND YOUR WAIST WHILE WEARING YOUR EVERYDAY BELT. DO NOT BASE YOUR BELT MEASUREMENT ON YOUR PANT SIZE.
FINALLY, SUBTRACT THE GAP YOU WANT FROM THE WAIST MEASUREMENT. ORDER THE PADDED BELT CLOSEST TO THIS FINAL MEASUREMENT. IF YOU CHOOSE THE COBRA® BELT, YOU WILL NEED TO GO UP A FEW INCHES FROM YOUR STANDARD BELT SIZE TO ACCOMMODATE THE ADDED GIRTH CREATED BY PADDED BELT. IF YOU CHOOSE THE DUTY BELT, PLEASE CHOOSE THE CLOSEST WAIST SIZE TO THE LENGTH OF PADDED BELT CHOSEN.Belt sizes are based on production averages and may vary by approximately one inch in either direction due to the handmade nature of the product.
Below is the total length of the SGPB for sizing:
31″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is Medium
36.5″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is Large
41.5″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is XL
46.75″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is 2X -
HSGI Laser Slim-Grip® Padded Belt – Slotted XL Wolf Gray
$122.00This new version is of our modular padded belt system is constructed with a laser-cut, proprietary heavy-duty nylon laminate. This belt’s slotted design allows inner belts to be woven under and over the MOLLE panels, making it compatible with both MOLLE and belt-mounted pouches and holsters. Our proprietary neoprene padding adds comfort while offering excellent grip and performance. The rear features an extra row of laser-cut MOLLE for larger pouches and additional comfort.
• Neoprene padding provides a “gel-like” comfort and unsurpassed grip
• Additional row of laser-cut PALS on wide back panel for comfort and larger pouches
• Individual laser-cut PALS platforms allow the innerbelt to be woven inside or outside of the PALS to satisfy user needs for MOLLE mounting or belt mounting holsters and other accessories
• Assembled with an HDPE stiffener for added stabilityCovered by HSGI’s® Lifetime Warranty. Made in the USA.
-
HSGI Laser Slim-Grip® Padded Belt – Slotted Multicam XL
$122.00This new version is of our modular padded belt system is constructed with a laser-cut, proprietary heavy-duty nylon laminate. This belt’s slotted design allows inner belts to be woven under and over the MOLLE panels, making it compatible with both MOLLE and belt-mounted pouches and holsters. Our proprietary neoprene padding adds comfort while offering excellent grip and performance. The rear features an extra row of laser-cut MOLLE for larger pouches and additional comfort.
• Neoprene padding provides a “gel-like” comfort and unsurpassed grip
• Additional row of laser-cut PALS on wide back panel for comfort and larger pouches
• Individual laser-cut PALS platforms allow the innerbelt to be woven inside or outside of the PALS to satisfy user needs for MOLLE mounting or belt mounting holsters and other accessories
• Assembled with an HDPE stiffener for added stabilityCovered by HSGI’s® Lifetime Warranty. Made in the USA.
-
HSGI Laser Slim-Grip® Padded Belt – Slotted Large Wolf Gray
$122.00This new version is of our modular padded belt system is constructed with a laser-cut, proprietary heavy-duty nylon laminate. This belt’s slotted design allows inner belts to be woven under and over the MOLLE panels, making it compatible with both MOLLE and belt-mounted pouches and holsters. Our proprietary neoprene padding adds comfort while offering excellent grip and performance. The rear features an extra row of laser-cut MOLLE for larger pouches and additional comfort.
• Neoprene padding provides a “gel-like” comfort and unsurpassed grip
• Additional row of laser-cut PALS on wide back panel for comfort and larger pouches
• Individual laser-cut PALS platforms allow the innerbelt to be woven inside or outside of the PALS to satisfy user needs for MOLLE mounting or belt mounting holsters and other accessories
• Assembled with an HDPE stiffener for added stabilityCovered by HSGI’s® Lifetime Warranty. Made in the USA.
-
HSGI LASER SLIM-GRIP® PADDED BELT – SLOTTED Medium Multicam
$122.00This new version is of our modular padded belt system is constructed with a laser-cut, proprietary heavy-duty nylon laminate. This belt’s slotted design allows inner belts to be woven under and over the MOLLE panels, making it compatible with both MOLLE and belt-mounted pouches and holsters. Our proprietary neoprene padding adds comfort while offering excellent grip and performance. The rear features an extra row of laser-cut MOLLE for larger pouches and additional comfort.
• Neoprene padding provides a “gel-like” comfort and unsurpassed grip
• Additional row of laser-cut PALS on wide back panel for comfort and larger pouches
• Individual laser-cut PALS platforms allow the innerbelt to be woven inside or outside of the PALS to satisfy user needs for MOLLE mounting or belt mounting holsters and other accessories
• Assembled with an HDPE stiffener for added stabilityCovered by HSGI’s® Lifetime Warranty. Made in the USA.
