$1,299.99
The LEGION P226 is finished in Cerakote® Elite LEGION gray coating, custom G-10 grips with a LEGION medallion, the SIG SAUER Electro-Optics X-RAY high visibility day/night sights comes with three magazines. The P226 in DA/SA includes a reduced and contoured Elite beavertail, which allows for a higher grip, but a reduced profile, thus eliminating printing. More aggressive front strap checkering and additional checkering under the trigger guard enhance the grip. An X-Five undercut has been applied to the trigger guard, allowing for a higher grip and greater control. Front cocking serrations provide greater purchase for cycling the action, clearing the firearm, or conducting press checks. The DA/SA is available in 9 mm. The DA/SA also features low profile decocking and slide catch levers to reduce the risk of snagging. An enhanced polished action with the SRT (Short-Reset Trigger) is augmented with a Grayguns, Inc. designed P-SAIT trigger. In addition, a solid steel guide rod adds weight where it matters most.
The P226 LEGION RX SAO variant brings the same feature set to the table in a single-action only package. The addition of the SIG Custom Works Flat Trigger provides an exceptional feel and consistent trigger pull regardless of finger placement. The SAO is available in 9mm.
This firearm is available both with or without a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
1 in stock
Weight | 3.85 lbs |
---|---|
Dimensions | 13.25 × 10 × 3.25 in |
UPC | 1239600000000 |
MPN | E26R-9-LEGION-SAO-R2 |
Arsenal SAM7R-61 7.62x39mm Semi-Automatic Rifle Enhanced FCG, 7.62 x 39 mm caliber rifle, milled and forged receiver, FIME Group enhanced fire control group, chrome lined hammer forged barrel, 14 mm muzzle threads, muzzle nut, cleaning rod, bayonet lug, black polymer furniture, intermediate length buttstock, scope rail, one 10 round magazine, sling, oil bottle, and cleaning kit.
The BT APC9 pistol with polymer frame; removable polymer grips; 5.5” barrel; low profile adjustable sights; dual auto-folding, non-reciprocating charging handle; side positioned bolt hold open/release; Magpul M-Lok accessory slots; closed bolt direct blowback system; hydraulic shock absorbing buffer; ambidextrous safety; 33-round magazine; and coyote tan finish.
The B&T APC9K, made up of the highest quality, meticulously machined components fitted with the Swiss-made precision that B&T is known for, brings a new level of performance and adaptability to the APC platform.
At the heart of this pistol’s operation is a hydraulic shock-absorbing buffer system that greatly mitigates recoil and enhances overall accuracy. More features of the BT APC9K include a 9mm-chambered barrel that is just 5.5 inches long; folding low profile adjustable sights for faster target acquisition; a dual auto-folding, non-reciprocating charging handle that hardly snags on loose clothing/equipment; ambidextrous controls including a safety selector switch; as well as improved lower receiver ergonomics including a flattop Picatinny rail for optics, an under-barrel rail for lights/lasers, a side positioned bolt hold open/release, and removable M4-compatible grips.
Shipped with a 33-round extended magazine, this B&T APC9K Pro for sale comes with a lower receiver outfitted to also accept widely available Glock magazines. The B&T APC9K Pro Glock magazine-compatible is in addition designed to accept an SB Tactical brace.
The legendary 1911 design has been brought into the 21st century with the refinements today’s shooters demand. The 1911 Fastback Carry Nightmare pistol features a stainless steel frame with rounded grip and mainspring housing. Each pistol is built using premium internal parts including a match grade barrel, hammer/sear set and trigger. The all Nitron coated frame and slide is contrasted with natural stainless controls, barrel bushing, extractor and grips screws. The Nightmare is finished with a set of black G10 double diamond grips that makes this 1911 SIG SAUER looks as good as it performs.
This firearm is equipped with a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
The ultimate titanium suppressor for 7.62 mm bolt-action rifles, the SOCOM762-Ti2 combines minimal weight with maximum accuracy
Lightweight titanium alloy construction allows for minimal impact on weapon-handling characteristics
Employs SureFire Total Signature Reduction® technology to virtually eliminate first-round flash, and reduce sound and dust signatures
V-shaped baffles significantly attenuate sound for tremendous reduction in muzzle report
Stay Light. Stay Strong. The SOCOM762-Ti2 enhances Surefire’s exceptional titanium suppressor line by providing the ultimate lightweight suppressor for 7.62 mm and .308-caliber bolt-action rifles. We designed it to exceed military sniper rifle suppressor specifications, making it the ideal lightweight suppressor for hunters and long-range precision shooters alike. SureFire’s strict manufacturing tolerances and exacting attention to bore concentricity and suppressor alignment result in tremendous accuracy. Constructed primarily of titanium, the SOCOM762-Ti2 weighs a mere 11 ounces while maintaining our strictest durability standards, so you won’t even feel it at the end of your barrel. Inside, its Direct Metal Laser Sintered, V-shaped titanium baffle stack significantly provides an unprecedented level of baffle alignment and structural integrity. The SOCOM762-Ti2 attenuates the muzzle report significantly, and our internal venting technology evenly distributes thermodynamic gases, greatly reducing pressure impulse effects on the projectile as it clears the muzzle. The SOCOM762-Ti2 is a durable 7.62/.308 titanium suppressor without equal.
Reviews
There are no reviews yet.