The SilencerCo ASR Flash Hider significantly suppresses muzzle flash, safeguarding the shooter’s vision, especially in low-light environments. Engineered for maximum effectiveness, this flash hider keeps your shots discreet and on target. Enhance your shooting experience with reduced flash signature and superior control. Additionally, the SilencerCo Flash Hider utilizes a patent-pending resonance suppression method that effectively eliminates the tuning-fork effect common with competing 3-prong Flash Hiders.
The SilencerCo ASR Flash Hider has the added benefit of being compatible with the SilencerCo ASR Mount, which you can thread over the top of this flash hider for a quick mount option. With multiple thread and caliber options of muzzle brakes, you can quickly and effectively shoot suppressed on multiple platforms. The ASR mount is one of the best performing suppressor mounting systems available today. See the size chart below to find the correct ASR Mount for your silencer.
New *RAW Finish – Same durability and corrosion resistance, but with the popular heat treated finish.
ASR Mounts:
Alpha: Harvester 300, Omega K Series, and Octane Series
Bravo: Harvester EVO, Hybrid 46, Harvester 338, Omega 300, and Scythe-Ti
Charlie: Saker ASR Series, Chimera 300, Omega 36M, and Hybrid 46M
Out of stock
AC1570
https://kfarmory.com/wp-content/uploads/2024/11/SILENCERCO_AC1570_9mm-ASR-FLASH-HIDER-WEB.jpg
Weight | 1 lbs |
---|---|
Dimensions | 6.5 × 4.5 × 1.5 in |
UPC | 816413020340 |
MPN | AC1570 |
The KAC Keymod Flat Panel Kit includes a set of seven 5.5 polymer rail panels. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black, FDE, Tan or Taupe
Panel Length: 5.5″
Material: Polymer
Quantity: 7
Model: P/N:31190-BLK, 31190-TAN, 31190-TAU
Manufactured by: Knight’s Armament Company
Note On Colors: Tan and Taupe are Knight’s Armament colors, Flat Dark Earth is a match to Magpul FDE
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel.
The URX 4 is currently available for 5.56 rifles in 8.5, 10, 10.75″, 13, and 14.5 lengths, and is equipped with Knights unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. The IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut. This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain.
A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knights Armament Company demonstrates its continuing determination to intelligently design effective products.
Two QD sling swivel sockets built in at the rear of the rail. Includes shim kit and installation wrench.
This 7-Piece Shim Set is for use in properly timing a flash hider or muzzle brake with KAC ¾-24 threads that index off of the muzzle. Kit includes 7 shims and Rockset adhesive.
Shim Sizes:
Shim set for SR-25/M110 muzzle threads using KAC standard ¾-24 muzzle devices.
Keymod mounted, 7-slot MILSTD 1913 picatinny rail segment. Fits the KAC URX 4 or other Keymod-style rails.
This KAC Keymod Accessory Rail is 3.7″ in length and provides a 7 slot section of mil-spec M1913 Picatinny rail for the addition of tactical accessories. Designed specifically for the URX 4 handguard, this rail section is also compatible with any other rifle handguard that has a Keymod interface. Aluminum construction.
Specifications:
Overall Length: 3.7″
M1913 Picatinny Rail Slots: 7
Reviews
There are no reviews yet.