Easily swap your SF Ryder 9 series suppressor to multiple weapons
Pistons available in 1/2×28 or M13.5×1 LH thread patterns
Manufactured from heat-treated stainless steel for superior durability
Switch With Ease. The SF® Ryder 9 Piston is a threaded component used to attach an SF Ryder 9-Ti, SF Ryder 9M-Ti or SF Ryder 9-Ti2 suppressor to the threaded barrel of the host weapon, allowing the suppressor to be used on multiple weapons. These pistons are machined from heat-treated stainless steel and have a black nitride finish.
Out of stock
UPC | 084871325578 |
---|---|
MPN | PISTON-9-M13.5X1LH |
When a suppressed weapon fires a large number of shots, the expanding gasses eject backwards towards the operator. This gas blowback is not only an annoyance, but also makes it more difficult for the operator to breathe and see. B&T’s RBS (Reduced Back Pressure) Suppressor Series was designed to counter this problem by minimizing gas blowback as well as reducing fouling. The RBS suppressor utilizes a unique low-pressure chamber to absorb a considerable amount of the expanding gasses, which in turn decreases the back pressure. In addition, RBS Suppressors are available in multiple calibers and configurations.
Features of the B&T RBS Suppressor:
Minimizes gas-blowback
Reduces fouling
Available in multiple calibers and configurations
The ultimate titanium suppressor for 7.62 mm bolt-action rifles, the SOCOM762-Ti2 combines minimal weight with maximum accuracy
Lightweight titanium alloy construction allows for minimal impact on weapon-handling characteristics
Employs SureFire Total Signature Reduction® technology to virtually eliminate first-round flash, and reduce sound and dust signatures
V-shaped baffles significantly attenuate sound for tremendous reduction in muzzle report
Stay Light. Stay Strong. The SOCOM762-Ti2 enhances Surefire’s exceptional titanium suppressor line by providing the ultimate lightweight suppressor for 7.62 mm and .308-caliber bolt-action rifles. We designed it to exceed military sniper rifle suppressor specifications, making it the ideal lightweight suppressor for hunters and long-range precision shooters alike. SureFire’s strict manufacturing tolerances and exacting attention to bore concentricity and suppressor alignment result in tremendous accuracy. Constructed primarily of titanium, the SOCOM762-Ti2 weighs a mere 11 ounces while maintaining our strictest durability standards, so you won’t even feel it at the end of your barrel. Inside, its Direct Metal Laser Sintered, V-shaped titanium baffle stack significantly provides an unprecedented level of baffle alignment and structural integrity. The SOCOM762-Ti2 attenuates the muzzle report significantly, and our internal venting technology evenly distributes thermodynamic gases, greatly reducing pressure impulse effects on the projectile as it clears the muzzle. The SOCOM762-Ti2 is a durable 7.62/.308 titanium suppressor without equal.
The SureFire-approved way to verify proper suppressor alignment
Precision-machined rod will show any deviation in alignment
Specific rods available for most popular calibers
Caliber
5.56 mm, 6.5 mm, 6.8 mm, 7.62 mm, 9 mm, .338 cal
Construction
Heat-Treated Stainless Steel
Get It Right The First Time. SureFire Bore Rods are valuable tools that will ensure proper concentricity along the bullet flight path when firing suppressed on a new platform. The rod most closely represents the bullet flight path and will show any misalignment, if present. SureFire recommends that operators verify barrel-to-adapter-to-suppressor alignment on any new build or any previously unshot setup, and SureFire Bore Rods are the most effective way to confirm it. Simply choose the corresponding rod for your caliber rifle or carbine.
Connects to all 5.56 QDC Muzzle Devices. Available in Black and Flat Dark Earth (-BLK) (-FDE).
Specifications
Addition to Bare Muzzle: 3.85″ (9.78cm)
Addition to QDC 3-prong FH: 2.33″ (5.92cm)
Overall Length: 4.43″ (11.25cm)
Weight: 13.9oz (395g)
Sound Reduction: 12dB
Reviews
There are no reviews yet.