![KFA_2025_Classic Logo_Red [HIREZ-FINAL01]](https://kfarmory.com/wp-content/uploads/2025/06/KFA_2025_Classic-Logo_Red-HIREZ-FINAL01-1-scaled.png#117002){kind=logo}
Surefire SF RYDER 9 Replacement Piston for SF® Ryder 9-Ti, SF Ryder 9M-Ti and SF Ryder 9-Ti2
$79.00
Easily swap your SF Ryder 9 series suppressor to multiple weapons
Pistons available in 1/2×28 or M13.5×1 LH thread patterns
Manufactured from heat-treated stainless steel for superior durability
Switch With Ease. The SF® Ryder 9 Piston is a threaded component used to attach an SF Ryder 9-Ti, SF Ryder 9M-Ti or SF Ryder 9-Ti2 suppressor to the threaded barrel of the host weapon, allowing the suppressor to be used on multiple weapons. These pistons are machined from heat-treated stainless steel and have a black nitride finish.
1 in stock
Related products
-
B&T 5.56 SF Titanium HUB Adapter
$355.00The Rotex-SF HUB is fully compatible with all 1.375x24TPI “HUB” compatible suppressors on the market today and is constructed of Titanium and stainless steel components. This HUB is compatible with all B&T Rotex flash hiders, as well as all SureFire SOCOM flash hiders, muzzle brakes and WarComp hybrid muzzle devices. The HUB is simply threaded into compatible suppressors and snugged up with a spanner wrench. HUB assemblies can be semi-permanently attached using Rocksett or other thread locking compounds should the end user desire. The Rotex-SF HUB ships standard with all Rotex and SRBS rifle suppressors.
Fully HUB Compatible (1.375x24TPI)
Constructed of Titanium and Stainless Steel
B&T Rotex Flash Hider and SureFire SOCOM Muzzle Device compatible
One-Hand Mounting System
5.56x45mm Compatible
Not Compatible with the SFA2-556 SF Muzzle Device -
B&T RBS 9mm Suppressor for APC9
$750.00When a suppressed weapon fires a large number of shots, the expanding gasses eject backwards towards the operator. This gas blowback is not only an annoyance, but also makes it more difficult for the operator to breathe and see. B&T’s RBS (Reduced Back Pressure) Suppressor Series was designed to counter this problem by minimizing gas blowback as well as reducing fouling. The RBS suppressor utilizes a unique low-pressure chamber to absorb a considerable amount of the expanding gasses, which in turn decreases the back pressure. In addition, RBS Suppressors are available in multiple calibers and configurations.
Features of the B&T RBS Suppressor:
Minimizes gas-blowback
Reduces fouling
Available in multiple calibers and configurations -
Surefire 7.62 Bore Alignment Rods For Suppressor Alignment Tools
$89.00The SureFire-approved way to verify proper suppressor alignment
Precision-machined rod will show any deviation in alignment
Specific rods available for most popular calibers
Caliber
5.56 mm, 6.5 mm, 6.8 mm, 7.62 mm, 9 mm, .338 cal
Construction
Heat-Treated Stainless Steel
Get It Right The First Time. SureFire Bore Rods are valuable tools that will ensure proper concentricity along the bullet flight path when firing suppressed on a new platform. The rod most closely represents the bullet flight path and will show any misalignment, if present. SureFire recommends that operators verify barrel-to-adapter-to-suppressor alignment on any new build or any previously unshot setup, and SureFire Bore Rods are the most effective way to confirm it. Simply choose the corresponding rod for your caliber rifle or carbine. -
KAC 5.56mm QDC/CRS-PRT Suppressor – BLK [NFA]
KAC’s Pressure Reduction Technology (PRT) Signature Reduction Device line blends the proven durability and acoustic performance of the previous generation of KAC suppressors with pressure reduction design.
These suppressors are specifically engineered to release the majority of the pressure contained in the device and bore prior to the operating system beginning extraction, which significantly reduces the negative effects of suppressor integration, and reduces felt recoil compared to a traditional suppressor with the same level of sound reduction.
Muzzle flash, and specifically first-round flash, has also been directly addressed and minimized with the PRT design. The Quick Disconnect (QDC) mounting method ensures reduced carbon-lock, as well as minimal but repeatable point of impact shift when transitioning between suppressed and unsuppressed configurations.
For interval maintenance, the PRT devices can be cleaned with commonly used bore solvents or ultrasonic tank cleaning with a water rinse.
The Knight’s Armament 5.56 QDC/CRS-PRT connects to all 5.56 QDC Muzzle Devices.Addition to Bare Muzzle: 5.67? (14.41cm)
Addition to QDC 3-prong FH: 4.15? (10.55cm)
Overall Length: 6.25? (15.88cm)
Weight: 19.2oz (545g)
Sound Reduction: 24dB
![KAC 5.56mm QDC/CRS-PRT Suppressor - BLK [NFA]](https://kfarmory.com/wp-content/uploads/2024/10/KAC_121567-BLK_556-QDC-CRS-PRT-Suppressor-WEB.jpg)
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
Reviews
There are no reviews yet.