$527.00
The P365 redefined what a concealed-carry pistol should be, now the new P365 XL is doing it again. The perfect balance of micro-compact concealability with full-size shootability the P365 XL packs 12 + 1 or available 15 + 1 capacity in a micro-compact, highly concealable size yet maintains the comfort and shootability of a full-size pistol. The first P365 offered in the X family, the XL comes standard with an extended slide, 3.7” barrel, and the brand new P365 X Grip Module with extended beavertail and integrated magwell. The new slide and grip module only add about 1/2″ to the overall length and height of the micro-compact P365, while increasing the capacity to 12+1 rounds of 9mm. It still maintains the crisp, clean P365 trigger pull, but with the “X” signature flat profile trigger that breaks at 90 degrees. Also standard are the signature XRay3 Day/Night sights with a rear sight plate assembly that allows direct mounting of the new SIG SAUER RomeoZero or the RMSc reflex optics. Never has so much versatility and capability been squeezed into such a perfectly concealable size.
*Includes patented optic cut technology designed by ZEV Technologies. Patent number: RE47335
This firearm is available both with or without a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
1 in stock
Weight | 0.45 lbs |
---|---|
Dimensions | 9.75 × 4.25 × 2 in |
UPC | 798681628865 |
MPN | W365XL-9-BXR3-MS |
Pack of two Velcro-backed PVC patches of the KAC Crest. These rugged patches are available in three different color schemes and couple perfectly with any KAC Gear equipped with hook and loop fasteners. Size is approx. 2?
QD socket mount to move sling rearward on the handguard while maintaining the lowest possible profile.
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel. The URX 4 is currently available for 5.56 rifles in 8.5″, 10″, 10.75″, 13″, and 14.5″ lengths, and is equipped with Knight’s unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. Th IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut.
This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain. A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knight’s Armament Company demonstrates its continuing determination to intelligently design effective products. It is not suggested to use this rail with a 14.5″ or shorter barrel unless using a muzzle device such as the AAC flash hider which can be installed from the end with a tool.
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel.
The URX 4 is currently available for 5.56 rifles in 8.5, 10, 10.75″, 13, and 14.5 lengths, and is equipped with Knights unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. The IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut. This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain.
A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knights Armament Company demonstrates its continuing determination to intelligently design effective products.
Two QD sling swivel sockets built in at the rear of the rail. Includes shim kit and installation wrench.
Reviews
There are no reviews yet.