THE ACRO P-2 IN FLAT DARK EARTH.
Aimpoint® has once again advanced the standard for pistol mounted optics with the introduction of the Acro P-2™ red dot sight. This next generation sight incorporates an improved LED emitter coupled with a higher capacity CR2032 battery to provide an astonishing five years (50,000 hours) of constant-on power while getting you on target faster and more accurately. Designed to endure the physical forces generated by semi-automatic pistol slides, the ACRO™ series was the first pistol sight to offer a fully enclosed optical channel to protect the LED emitte. Built to exceed the requirements of professional users, the Acro P-2 has been tested and proven to withstand the extreme shock, vibration, temperatures, and material stresses generated by firing over 20,000 rounds of .40 S&W ammunition. The new high efficiency LED emitter provides a sharp 3.5 MOA dot. Protective clear glass front and rear lenses guard the advanced reflective lens system. The new digital intensity adjustment keypad provides a more distinct tactile feel when adjusting the dot intensity, and these controls are now placed next to the battery compartment to help protect the power adjustments against unintentional changes. In addition to use as a primary optic on handguns, the Acro P-2 can be mounted on carbines, shotguns and rifles or utilized as a backup sight on magnified scopes and thermal imagers. The sight can be mounted on a wide range of optics-ready handguns using adapter plates. It is night vision compatible, and the dot can also be turned up for use in bright sunlight. Aimpoint red dot sights are operationally parallax-free, which means the visible dot remains parallel to the bore of your weapon no matter what angle your eye is in relation to the sight. Therefore, the user never has to worry about centering the dot inside the sight. If you have a proper zero, when the dot is on the target, so are you. Aimpoint red dot sights increase confidence by allowing the shooter to focus on the target while keeping both eyes open, fully situationally aware at all times. Users can achieve first round hits faster with greater confidence. The matte finish of the Cerakote® may cause a patina on the housing in transit.
UNIQUE FEATURES
3.5 MOA red dot for precision and fast target acquisition
Battery life: 50,000 hours (over 5 years) of constant operation with one battery on setting 6
Battery type: CR2032 battery (battery included)
Battery can be quickly changed without removing optic
Variety of mounting options sold separately
Optimized for pistol and applications which require a low-profile red dot system
Fully enclosed housing protects all electronic components of the sight from all elements
Sealed optical channel protects the optic from rain, mud, sand, or snow
7075-T6 High-strength Aluminum Hard-anodized with Cerakoate H-Series Flat Dark Earth coating
10 brightness settings: 4 night vision compatible settings and 6 daylight settings
1X (non-magnifying) operationally parallax free optic
Submersible to 115 feet (35 meters)
Temperature span -49°F to +160°F
Weight 2.1 oz / 60 g (sight only)
Size 1.9” x 1.3” x 1.2” (L x W x H)
Out of stock
| Weight | 0.75 lbs |
|---|---|
| Dimensions | 4.75 × 4.5 × 2.75 in |
| MPN | AP-200777-FDE-M |
| pfid | 12453 |
The KAC Keymod Flat Panel Kit includes a set of seven 5.5 polymer rail panels. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black, FDE, Tan or Taupe
Panel Length: 5.5″
Material: Polymer
Quantity: 7
Model: P/N:31190-BLK, 31190-TAN, 31190-TAU
Manufactured by: Knight’s Armament Company
Note On Colors: Tan and Taupe are Knight’s Armament colors, Flat Dark Earth is a match to Magpul FDE
The KAC URX 4 Rail is a fully modular design that utilizes the revolutionary KeyMod accessory mounting system. The URX 4 Rail is stronger and more stable than previous URX designs due to its one piece construction. It is also lighter due to its Integral Barrel Nut (IBN) system of attachment. The IBN system allows the rail itself to act as the barrel nut when torqued onto the rifle, completely eliminating the need for a separate steel barrel nut. KeyMod accessories may be mounted anywhere along the URX 4s length, making it one of the most user configurable designs on the market. The URX 4 includes two QD sling swivel sockets, one on the left side and one on the right.
Specifications:
Length: 10.75″
Weight: 10.2 oz
Inside Diameter: 1.55″
Outside Diameter: 1.68″ (Side to Side)
Each URX 4 Rail comes complete with an installation wrench, shim kit and instructions. Other lengths available include 8.5″, 10″, 13″, and 14.5″.
Keymod mounted, 7-slot MILSTD 1913 picatinny rail segment. Fits the KAC URX 4 or other Keymod-style rails.
This KAC Keymod Accessory Rail is 3.7″ in length and provides a 7 slot section of mil-spec M1913 Picatinny rail for the addition of tactical accessories. Designed specifically for the URX 4 handguard, this rail section is also compatible with any other rifle handguard that has a Keymod interface. Aluminum construction.
Specifications:
Overall Length: 3.7″
M1913 Picatinny Rail Slots: 7
This 7-Piece Shim Set is for use in properly timing a flash hider or muzzle brake with KAC ¾-24 threads that index off of the muzzle. Kit includes 7 shims and Rockset adhesive.
Shim Sizes:
Shim set for SR-25/M110 muzzle threads using KAC standard ¾-24 muzzle devices.