![KFA_2025_Classic Logo_Red [HIREZ-FINAL01]](https://kfarmory.com/wp-content/uploads/2025/06/KFA_2025_Classic-Logo_Red-HIREZ-FINAL01-1-scaled.png#117002){kind=logo}
Sig Sauer SRD762-QD Taper-Lok® CQB Flash Hider – 5/8 x 24 TPI
Revolutionary SIG SAUER system enables quick and simple attachment of suppressor to firearm. Taper-Lok Fast-Attach System with CQB Flash Hider optimizes alignment, improves accuracy, reduces point of impact shift and doesn’t require any shims. Taper-Lok mount is also extremely simple to install, transforming an hour project into a 5-minute job.
Available in multiple thread pitches and calibers, Taper-Lok CQB Flash Hider self-centers the firearm and suppressor, which reduces group dispersion. It’s also available in a sub-caliber mount to enable true multi-caliber versatility, such as using the SRD762 suppressor on a 5.56-caliber firearm. CQB Flash Hider is low profile yet effective at reducing muzzle flash. It works best on SIG Taper-Lok-shouldered barrels, but is also backwards compatible with traditional, 90-degree shouldered barrels.
Please check with your local and state municipalities for any further regulatory requirements. It is your responsibility as the buyer of these components to make sure you comply with all NFA rules and applicable laws.
Out of stock
Email when stock available
| Weight | 0.1 lbs |
|---|---|
| Dimensions | 7 × 4 × 1 in |
| UPC | 798681525195 |
| MPN | SRD-762-58X24-F |
Related products
-
KAC 7 Piece Panel Kit, Keymod URX 4 – FDE
$20.11The KAC Keymod Flat Panel Kit includes a set of seven 5.5 polymer rail panels. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black, FDE, Tan or Taupe
Panel Length: 5.5″
Material: Polymer
Quantity: 7
Model: P/N:31190-BLK, 31190-TAN, 31190-TAU
Manufactured by: Knight’s Armament Company
Note On Colors: Tan and Taupe are Knight’s Armament colors, Flat Dark Earth is a match to Magpul FDE -
KAC 30mm KAC EER MOD 1 Scope Mount
$330.50Scope mount for day optics.1.94″ right height and forward position for extended eye relief. One piece construction.
Ring Size: 30mm
Right Height: 1.94″
Weight: 7.4oz
-
KAC URX 4 IBN Keymod Rail 5.56mm 13.0″ Length
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel.
The URX 4 is currently available for 5.56 rifles in 8.5, 10, 10.75″, 13, and 14.5 lengths, and is equipped with Knights unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. The IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut. This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain.
A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knights Armament Company demonstrates its continuing determination to intelligently design effective products.
Two QD sling swivel sockets built in at the rear of the rail. Includes shim kit and installation wrench.
-
KAC 30mm Viper, Picatinny Scope Cap
Picatinny rail scope cap allows for attaching accessory sighting systems.
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
Reviews
There are no reviews yet.