![KFA_2025_Classic Logo_Red [HIREZ-FINAL01]](https://kfarmory.com/wp-content/uploads/2025/06/KFA_2025_Classic-Logo_Red-HIREZ-FINAL01-1-scaled.png#117002){kind=logo}
ZEV Optimized Match G17 Gen1-4 Threaded Barrel – Bronze, 1/2×28
$299.99
ZEV Technologies, Optimized Match Threaded Dimpled Barrel, 9MM, For Glock 17 Gen 1 to 4 (Does Not Fit Gen5), Bronze
1 in stock
ZEV Technologies Optimized Match Barrels have been redesigned for improved performance and Gen5 compatibility.
Enhanced features include a recessed target crown, a new match chamber, and a stylized barrel hood with caliber and model engravings and a loaded chamber indicator.
ZEV’s proprietary broach cut 1 in 14” left hand twist rifling was developed to create the most accurate Glock aftermarket barrel available, and testing confirms a significant increase in accuracy over factory barrels in all standard bullet weights.
Manufactured from 416R stainless steel which is an ideal material for making match grade barrels because the material allows for the precise cutting of chambers and rifling which results in a more accurate barrel.
Available in Black and Bronze.
ZEV barrels for the Glock 34 models are non-threaded only.
| Weight | 2 lbs |
|---|---|
| Dimensions | 12 × 8.5 × 1 in |
| UPC | 811338035394 |
Related products
-
HSGI COBRA® 1.75″ Rigger Belt Multicam Large
$203.00Sewn with strength and attention to detail, this belt is equipped with the proven quick-release COBRA® buckle and is available with a sewn-in or integrated D-ring. The interior loop fastener is designed to match up with our Sure-Grip® Padded Belts or ABM pouches to lock the belt or pouches into place.
• Constructed with two layers of 1.75″ Type 13 webbing
• Additional rigidity and stiffness are added with a proprietary adhesive before sewing
• Buckle color matches belt (IDR buckle is always black)*Use actual measurements and not pant size when picking your belt size*
Small – 28″-30″
Medium – 32″-34″
Large – 36″-38″
XL – 40″-42″
2X – 44″-46″
3X – 48″-50″Covered by HSGI’s® Lifetime Warranty. Made in the USA.
**HSGI’s® rigger belts are NOT labeled or certified for climbing or use as Life Saving Equipment. HSGI® will not be held responsible for any injuries or death for the misuse of any of our products.**
-
KAC M-LOK QD Mount, Low Profile
$69.13QD socket mount to move sling rearward on the handguard while maintaining the lowest possible profile.
-
KAC Keymod Wire Management Panel Kit, URX 4, Flat Dark Earth (FDE)
$20.11The KAC Keymod Flat Panel Kit includes a set of 2 – 5.5 polymer rail panels and one short switch pocket. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. The long panels have 3 cable channels to help with switch cable routing. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black or FDE
Panel Length: 5.5″
Material: Polymer
Model: P/N:31560-BLK, 31560-FDE
Manufactured by: Knight’s Armament Company
*Note: FDE is designed to match Magpul FDE -
KAC 30mm Viper, Picatinny Scope Cap
Picatinny rail scope cap allows for attaching accessory sighting systems.
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
Reviews
There are no reviews yet.