![KFA_2025_Classic Logo_Red [HIREZ-FINAL01]](https://kfarmory.com/wp-content/uploads/2025/06/KFA_2025_Classic-Logo_Red-HIREZ-FINAL01-1-scaled.png#117002){kind=logo}
KAC 11-RIB PICATINNY RAIL PANEL BLACK
$27.99
KAC’s iconic Ribbed Rail Panels have seen use all over the globe on US military M4 Carbines. The lightweight polymer panels are ribbed for an enhanced grip, and help insulate the support hand from barrel heat. While originally designed for use on the KAC M4 RIS and M4 RAS rails, these panels are also compatible with many other railed handguards.
Material: Polymer
Ribs: 11
Length: 6.15″
5 in stock
Related products
-
KAC SR-25 URX Wrench
SR-25 URX wrench. This wrench is required when installing a URX rail system on an SR-25 rifle. Not for use with SR-15 rifles. For the SR-15 URX wrench, use PN:20495.
-
KAC SR-15 E3.2 Field Repair Kit
$190.00The SR-15 Field Repair Kit includes the essential components to keep your rifle running over the long term. Also compatible with SR-16 variants.
Field Repair Kit Contents
(2x) Ejector
(1x) Ejector Roll Pin
(2x) Ejector Spring
(1x) Extractor
(1x) Extractor Pivot Pin
(2x) Extractor Springs, Heavy
(1x) Cam Pin
(1x) Firing Pin
(1x) Firing Pin Retainer Pin
(3x) Gas Rings -
KAC Keymod Wire Management Panel Kit, URX 4, Flat Dark Earth (FDE)
$20.11The KAC Keymod Flat Panel Kit includes a set of 2 – 5.5 polymer rail panels and one short switch pocket. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. The long panels have 3 cable channels to help with switch cable routing. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black or FDE
Panel Length: 5.5″
Material: Polymer
Model: P/N:31560-BLK, 31560-FDE
Manufactured by: Knight’s Armament Company
*Note: FDE is designed to match Magpul FDE -
KAC 35mm Modular Scope Cap
Modular scope cap allows for attaching accessory sighting systems at the left or right 30 degree offset, or in the 12 o’clock position. Compatible with all appropriate size KAC scope mounts.
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
Reviews
There are no reviews yet.