KAC Crest Patch, Green
These rugged patches are available in three different color schemes and couple perfectly with any KAC Gear equipped with hook and loop fasteners. Size is approx. 2″ x 3″.
Out of stock
Email when stock available
| Weight | 1 lbs |
|---|---|
| Dimensions | 3 × 3 × 1 in |
| UPC | 1014800000000 |
| Brand | Knight's Armament Company |
| MPN | KAC 58498-GRN |
Related products
-
KAC M-LOK QD Mount, Low Profile
QD socket mount to move sling rearward on the handguard while maintaining the lowest possible profile.
-
KAC 7 Piece Panel Kit, Keymod URX 4 – FDE
$20.11The KAC Keymod Flat Panel Kit includes a set of seven 5.5 polymer rail panels. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black, FDE, Tan or Taupe
Panel Length: 5.5″
Material: Polymer
Quantity: 7
Model: P/N:31190-BLK, 31190-TAN, 31190-TAU
Manufactured by: Knight’s Armament Company
Note On Colors: Tan and Taupe are Knight’s Armament colors, Flat Dark Earth is a match to Magpul FDE -
KAC URX 4 IBN Keymod Rail 5.56mm 13.0″ Length
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel.
The URX 4 is currently available for 5.56 rifles in 8.5, 10, 10.75″, 13, and 14.5 lengths, and is equipped with Knights unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. The IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut. This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain.
A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knights Armament Company demonstrates its continuing determination to intelligently design effective products.
Two QD sling swivel sockets built in at the rear of the rail. Includes shim kit and installation wrench.
-
KAC 7-Piece Muzzle Device Shim Set, for SR-25/M110
$32.97This 7-Piece Shim Set is for use in properly timing a flash hider or muzzle brake with KAC ¾-24 threads that index off of the muzzle. Kit includes 7 shims and Rockset adhesive.
Shim Sizes:
Shim set for SR-25/M110 muzzle threads using KAC standard ¾-24 muzzle devices.
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
Reviews
There are no reviews yet.