The limited release of the M18-Commemorative Edition of the official U.S. military service pistol, a variant of the SIG SAUER P320, is now available. The M18-Commemorative pistol shares the same components, coating, and markings as the firearm that was awarded the U.S. military contract for the Modular Handgun System (MHS), and is now in service with all branches of the U.S. Military.
The M18-Commemorative is a 9mm, striker-fired pistol. The pistol features a coyote carry length grip module, a coyote-tan PVD coated stainless steel slide with the same optic cut as specified by the MHS contract, the original coyote-tan colored controls, an ambidextrous manual safety, and is equipped with SIGLITE front night sights and removable night sight rear plate. The M18-Commemorative ships with two 21-round magazines and one 17-round magazine and is sold in the same cardboard packaging as delivered to the U.S. Army.
The SIG SAUER M18-Commemorative pistol features a unique serial number ranging from M18-0001 through M18-5000. Upon registration of the M18-Commemorative pistol, the purchaser will receive an official certificate of authenticity and commemorative challenge coin, both with serial numbers matching the purchased M18-Commemorative pistol.
This firearm is equipped with a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
Out of stock
Weight | 3.85 lbs |
---|---|
Dimensions | 13.25 × 10 × 3.25 in |
MPN | M18-COMMEMORATIVE |
KAC’s iconic Ribbed Rail Panels have seen use all over the globe on US military M4 Carbines. The lightweight polymer panels are ribbed for an enhanced grip, and help insulate the support hand from barrel heat. While originally designed for use on the KAC M4 RIS and M4 RAS rails, these panels are also compatible with many other railed handguards.
Material: Polymer
Ribs: 6
Length: 3.90″
Color: Black, Taupe
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel.
The URX 4 is currently available for 5.56 rifles in 8.5”, 10”, 10.75″, 13”, and 14.5” lengths, and is equipped with KnightÂ’s unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. The IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut. This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain.
A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, KnightÂ’s Armament Company demonstrates its continuing determination to intelligently design effective products.
Two QD sling swivel sockets built in at the rear of the rail. Includes shim kit and installation wrench.
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel. The URX 4 is currently available for 5.56 rifles in 8.5″, 10″, 10.75″, 13″, and 14.5″ lengths, and is equipped with Knight’s unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. Th IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut.
This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain. A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knight’s Armament Company demonstrates its continuing determination to intelligently design effective products. It is not suggested to use this rail with a 14.5″ or shorter barrel unless using a muzzle device such as the AAC flash hider which can be installed from the end with a tool.
Modular scope cap allows for attaching accessory sighting systems at the left or right 30 degree offset, or in the 12 o’clock position. Compatible with all appropriate size KAC scope mounts.
Reviews
There are no reviews yet.