The P365SAS was designed for the serious CCW user who truly understands the value of smoother draws, faster sight acquisition, and more effective engagements at realistic distances. This pistol does just that by taking the concept of the SIG Anti Snag (SAS) treatment to a whole new level. With the incorporation of the FT Bullseye sight embedded into the slide, the P365SAS does away with the need of a primary snag hazard of all pistols…the front sight. With the assistance of fiber optics during the day and tritium in low light, the user can now obtain a crystal clear high-visibility bullseye sight picture at real-world engagement distances faster than ever before. The flush slide catch and takedown levers ensure absolute smoothness and zero snag risk. After shooting the P365SAS, sights will never look the same.
Features:
– Flush-Mounted FT Bullseye Fiber-Tritium Night Sight
– Flat Controls for Completely Smooth Sides to Reduce Snag Points
– SIG Anti-Snag Slide Treatment
– Striker Fired Design with a Clean, Crisp Trigger Pull
– (1) 10rd Flush and (1) 10rd Extended Mag Included
This firearm is not available with a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
Out of stock
Weight | 2.2 lbs |
---|---|
Dimensions | 10.25 × 7.75 × 3 in |
UPC | 798681629022 |
MPN | 365-9-SAS |
Knight’s Armament crest logo embroidered on the left side and Knight’s Armament embroidered on the right side. Velcro located on front, top and on the back. These are fully customizable with your own patches. Available in black, green, and tan.
Scope mount for day optics.1.94″ right height and forward position for extended eye relief. One piece construction.
Ring Size: 34mm
Right Height: 1.94″
Weight: 7.4oz
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel. The URX 4 is currently available for 5.56 rifles in 8.5″, 10″, 10.75″, 13″, and 14.5″ lengths, and is equipped with Knight’s unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. Th IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut.
This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain. A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knight’s Armament Company demonstrates its continuing determination to intelligently design effective products. It is not suggested to use this rail with a 14.5″ or shorter barrel unless using a muzzle device such as the AAC flash hider which can be installed from the end with a tool.
Keymod mounted, 7-slot MILSTD 1913 picatinny rail segment. Fits the KAC URX 4 or other Keymod-style rails.
This KAC Keymod Accessory Rail is 3.7″ in length and provides a 7 slot section of mil-spec M1913 Picatinny rail for the addition of tactical accessories. Designed specifically for the URX 4 handguard, this rail section is also compatible with any other rifle handguard that has a Keymod interface. Aluminum construction.
Specifications:
Overall Length: 3.7″
M1913 Picatinny Rail Slots: 7
Reviews
There are no reviews yet.