$2,999.99
In collaboration with Blowndeadline custom Cerakote, SIG Custom Works is proud to introduce the MCX-SPEAR-LT MULTICAM, featuring a hand-sprayed, Multicam pattern Cerakote finish, built to withstand extreme levels of wear and tear far better than standard dips and paint. Configured as a pistol with an 11.5” barrel, and chambered in 5.56 NATO, the SIG Custom Works MCX-SPEAR-LT MULTICAM edition delivers all the same modularity and performance as the complete MCX-SPEAR LT family with a high-performance Cerakote finish from the experts at Blowndeadline. Multicam Minimalist Stock available only as accessory item, not included on the gun.
Multicam Cerakoted handguard, upper, and lower receiver by Blown Deadline
Savior Equipment Coyote Covert Rifle Case
Fully Ambidextrous controls
SIG Flatblade Match Lite Duo Trigger
SIG QD Suppressor-Ready Flash Hider
For the first time, this rifle comes with a Savior Equipment Coyote Covert Rifle Case.
The rifle case features a padded single rifle compartment, exterior accessory pockets, a concealed pocket, and hideable padded backpack straps. Its dimensions are 30” x 13” x 5” externally, with internal measurements of 29” x 12.5” x 3”, including a dark FDE color scheme.
2 in stock
Weight | 9 lbs |
---|---|
Dimensions | 46 × 11 × 5 in |
UPC | 798681686131 |
MPN | PMCX-556N-11B-CW-V1- |
The BT APC9 pistol with polymer frame; removable polymer grips; 5.5” barrel; low profile adjustable sights; dual auto-folding, non-reciprocating charging handle; side positioned bolt hold open/release; Magpul M-Lok accessory slots; closed bolt direct blowback system; hydraulic shock absorbing buffer; ambidextrous safety; 33-round magazine; and coyote tan finish.
The B&T APC9K, made up of the highest quality, meticulously machined components fitted with the Swiss-made precision that B&T is known for, brings a new level of performance and adaptability to the APC platform.
At the heart of this pistol’s operation is a hydraulic shock-absorbing buffer system that greatly mitigates recoil and enhances overall accuracy. More features of the BT APC9K include a 9mm-chambered barrel that is just 5.5 inches long; folding low profile adjustable sights for faster target acquisition; a dual auto-folding, non-reciprocating charging handle that hardly snags on loose clothing/equipment; ambidextrous controls including a safety selector switch; as well as improved lower receiver ergonomics including a flattop Picatinny rail for optics, an under-barrel rail for lights/lasers, a side positioned bolt hold open/release, and removable M4-compatible grips.
Shipped with a 33-round extended magazine, this B&T APC9K Pro for sale comes with a lower receiver outfitted to also accept widely available Glock magazines. The B&T APC9K Pro Glock magazine-compatible is in addition designed to accept an SB Tactical brace.
The LEGION P229 is finished in a Cerakote® Elite LEGION gray coating, custom G-10 grips with a LEGION medallion, the new SIG SAUER Electro-Optics X-RAY high visibility day/night sights and will ship with three magazines. The P229 in DA/SA include a reduced and contoured Elite beavertail, which allows for a higher grip, but a reduced profile, thus eliminating printing. More aggressive front strap checkering and additional checkering under the trigger guard enhance the grip. An X-Five undercut has been applied to the trigger guard, allowing for a higher grip and greater control. Front cocking serrations provide greater purchase for cycling the action, clearing the firearm, or conducting press checks. The pistol is available in 9 mm and also features low profile decocking and slide catch levers to reduce the risk of snagging. An enhanced polished action with the SRT (Short-Reset Trigger) is augmented with a Grayguns, Inc. designed P-SAIT trigger. In addition, a solid steel guide rod adds weight where it matters most.
This firearm is available both with or without a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
The SR-25 E2 APC series is the latest evolution of the dual role 7.62 mm NATO Carbine and Rifle. Each are equally adept at putting rounds on target past 800 meters or rapid multi-shot engagement at close range, with a barrel and bolt life to support the training regimen necessary to master these skills. An ambidextrous bolt release, selector, and magazine release offer the left-handed user the ergonomic advantages inherent to AR15 based controls, as well as giving right-handed users alternate methods of manipulation to increase efficiency of movement. The drop-in 2-stage trigger serves double duty as an aid to long range precision marksmanship while enabling surgical speed shooting at close range. A 7.62 QDC Flash Suppressor reduces flash and ground disturbance, and supports KAC QDC Signature Reduction Devices.
SR-25 E2 APC M-LOK
P/N:31955
Barrel:
16″ (40 cm) 5R Cut 1:10 Twist
Caliber:
7.62 mm NATO / .308 Win
Weight:
9 lbs (4.1 kg)
Length:
35.75″ (91 cm) to 39.5″ (100 cm)
to 39.5″ (100 cm)
KAC’s newest answer for a superior rifle suppressor 3D printed and incorporating their Pressure Reduction Technology (PRT)
KAC PN 119354-BLK & 119354-FDE
Connects to all 5.56 QDC Muzzle Devices. Available in Black and Flat Dark Earth (-BLK) (-FDE).
Specifications
Addition to Bare Muzzle: 3.85″ (9.78cm)
Addition to QDC 3-prong FH: 2.33″ (5.92cm)
Overall Length: 4.43″ (11.25cm)
Weight: 13.9oz (395g)
Sound Reduction: 12dB
Reviews
There are no reviews yet.