$2,999.99
In collaboration with Blowndeadline custom Cerakote, SIG Custom Works is proud to introduce the MCX-SPEAR-LT MULTICAM, featuring a hand-sprayed, Multicam pattern Cerakote finish, built to withstand extreme levels of wear and tear far better than standard dips and paint. Configured as a pistol with an 11.5” barrel, and chambered in 5.56 NATO, the SIG Custom Works MCX-SPEAR-LT MULTICAM edition delivers all the same modularity and performance as the complete MCX-SPEAR LT family with a high-performance Cerakote finish from the experts at Blowndeadline. Multicam Minimalist Stock available only as accessory item, not included on the gun.
Multicam Cerakoted handguard, upper, and lower receiver by Blown Deadline
Savior Equipment Coyote Covert Rifle Case
Fully Ambidextrous controls
SIG Flatblade Match Lite Duo Trigger
SIG QD Suppressor-Ready Flash Hider
For the first time, this rifle comes with a Savior Equipment Coyote Covert Rifle Case.
The rifle case features a padded single rifle compartment, exterior accessory pockets, a concealed pocket, and hideable padded backpack straps. Its dimensions are 30” x 13” x 5” externally, with internal measurements of 29” x 12.5” x 3”, including a dark FDE color scheme.
2 in stock
| Weight | 9 lbs |
|---|---|
| Dimensions | 46 × 11 × 5 in |
| UPC | 798681686131 |
| MPN | PMCX-556N-11B-CW-V1- |
When a suppressed weapon fires a large number of shots, the expanding gasses eject backwards towards the operator. This gas blowback is not only an annoyance, but also makes it more difficult for the operator to breathe and see. B&T’s RBS (Reduced Back Pressure) Suppressor Series was designed to counter this problem by minimizing gas blowback as well as reducing fouling. The RBS suppressor utilizes a unique low-pressure chamber to absorb a considerable amount of the expanding gasses, which in turn decreases the back pressure. In addition, RBS Suppressors are available in multiple calibers and configurations.
Features of the B&T RBS Suppressor:
Minimizes gas-blowback
Reduces fouling
Available in multiple calibers and configurations
The legendary 1911 design has been brought into the 21st century with the refinements today’s shooters demand. The 1911 Fastback Carry Nightmare pistol features a stainless steel frame with rounded grip and mainspring housing. Each pistol is built using premium internal parts including a match grade barrel, hammer/sear set and trigger. The all Nitron coated frame and slide is contrasted with natural stainless controls, barrel bushing, extractor and grips screws. The Nightmare is finished with a set of black G10 double diamond grips that makes this 1911 SIG SAUER looks as good as it performs.
This firearm is equipped with a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
The ultimate titanium suppressor for 7.62 mm bolt-action rifles, the SOCOM762-Ti2 combines minimal weight with maximum accuracy
Lightweight titanium alloy construction allows for minimal impact on weapon-handling characteristics
Employs SureFire Total Signature Reduction® technology to virtually eliminate first-round flash, and reduce sound and dust signatures
V-shaped baffles significantly attenuate sound for tremendous reduction in muzzle report
Stay Light. Stay Strong. The SOCOM762-Ti2 enhances Surefire’s exceptional titanium suppressor line by providing the ultimate lightweight suppressor for 7.62 mm and .308-caliber bolt-action rifles. We designed it to exceed military sniper rifle suppressor specifications, making it the ideal lightweight suppressor for hunters and long-range precision shooters alike. SureFire’s strict manufacturing tolerances and exacting attention to bore concentricity and suppressor alignment result in tremendous accuracy. Constructed primarily of titanium, the SOCOM762-Ti2 weighs a mere 11 ounces while maintaining our strictest durability standards, so you won’t even feel it at the end of your barrel. Inside, its Direct Metal Laser Sintered, V-shaped titanium baffle stack significantly provides an unprecedented level of baffle alignment and structural integrity. The SOCOM762-Ti2 attenuates the muzzle report significantly, and our internal venting technology evenly distributes thermodynamic gases, greatly reducing pressure impulse effects on the projectile as it clears the muzzle. The SOCOM762-Ti2 is a durable 7.62/.308 titanium suppressor without equal.
KAC’s newest answer for a superior rifle suppressor 3D printed and incorporating their Pressure Reduction Technology (PRT)
KAC PN 119354-BLK & 119354-FDE
Connects to all 5.56 QDC Muzzle Devices. Available in Black and Flat Dark Earth (-BLK) (-FDE).
Specifications
Addition to Bare Muzzle: 3.85″ (9.78cm)
Addition to QDC 3-prong FH: 2.33″ (5.92cm)
Overall Length: 4.43″ (11.25cm)
Weight: 13.9oz (395g)
Sound Reduction: 12dB
Reviews
There are no reviews yet.