![KFA_2025_Classic Logo_Red [HIREZ-FINAL01]](https://kfarmory.com/wp-content/uploads/2025/06/KFA_2025_Classic-Logo_Red-HIREZ-FINAL01-1-scaled.png#117002){kind=logo}
B&T Magazine Slim Bumper Upgrade Kit
This is the upgrade kit for the B&T magazines compatible with TP9/APC9/GHM9/SPC9/KH9. This upgrade reinforces the bottom with a two piece base plate and covers it with a slim lined rubber bumper that will protect the base of the magazine from drops and falls.
The base plate in this kit is not compatible with the Army bumper. This kit is only compatible with the 20, 25, and 30 round capacity 9mm magazines.
Out of stock
Email when stock available
BT-300698
| Weight | .2 lbs |
|---|---|
| Dimensions | 3 × 1 × 1 in |
| UPC | 1444600000000 |
| MPN | BT-300698 |
Related products
-
KAC 34mm KAC EER MOD 1
$370.04Scope mount for day optics.1.94″ right height and forward position for extended eye relief. One piece construction.
Ring Size: 34mm
Right Height: 1.94″
Weight: 7.4oz
-
KAC SR-15/SR-16 Field Repair Kit
The SR-15 Field Repair Kit includes the essential components to keep your rifle running over the long term. Also compatible with SR-16 variants.
Field Repair Kit Contents:
(1x) Ejector
(1x) Ejector Roll Pin
(1x) Ejector Spring
(1x) Extractor
(1x) Extractor Pivot Pin
(2x) Extractor Springs, Heavy
(1x) Cam Pin
(1x) Firing Pin
(1x) Firing Pin Retainer Pin
(3x) Gas Rings
-
KAC M4 Receiver Sling Mount, With HD Push-Button Swivel
Replaces the stock plate, ambidextrous. Includes KAC heavy duty 1-1/4″ push-button sling swivel shown.
QD swivel socket is anti-rotation. Receiver extension nut included is now a standard castle nut so a common castle nut wrench can be used for installation.
-
KAC Keymod Wire Management Panel Kit, URX 4, Flat Dark Earth (FDE)
$20.11The KAC Keymod Flat Panel Kit includes a set of 2 – 5.5 polymer rail panels and one short switch pocket. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. The long panels have 3 cable channels to help with switch cable routing. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black or FDE
Panel Length: 5.5″
Material: Polymer
Model: P/N:31560-BLK, 31560-FDE
Manufactured by: Knight’s Armament Company
*Note: FDE is designed to match Magpul FDE
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
Reviews
There are no reviews yet.