B&T SRBS 7.62 Suppressor
Addressing the issue of signature common to reduced backpressure designs, the SRBS762 series provides the same flash reduction expected of a B&T suppressor while maintaining a remarkably quiet tone. The SRBS762 series also features a redesigned low-flash endcap, 1.375×24 TPI HUB compatibility, a new exterior texture, and a bead-blasted finish, all in a lightweight 3D-printed package.
Quick Specs
Caliber: 7.62 NATO
Operation:
Mag Capacity:
Weight: 18.4 oz / 521g
Out of stock
Email when stock available
SD-762SRBS
| Weight | 2 lbs |
|---|---|
| Dimensions | 12.5 × 2.5 × 2.25 in |
| UPC | 840225716269 |
| MPN | SD-762SRBS |
Related products
-
B&T RBS 9mm Suppressor for APC9
$750.00When a suppressed weapon fires a large number of shots, the expanding gasses eject backwards towards the operator. This gas blowback is not only an annoyance, but also makes it more difficult for the operator to breathe and see. B&T’s RBS (Reduced Back Pressure) Suppressor Series was designed to counter this problem by minimizing gas blowback as well as reducing fouling. The RBS suppressor utilizes a unique low-pressure chamber to absorb a considerable amount of the expanding gasses, which in turn decreases the back pressure. In addition, RBS Suppressors are available in multiple calibers and configurations.
Features of the B&T RBS Suppressor:
Minimizes gas-blowback
Reduces fouling
Available in multiple calibers and configurations -
Surefire 7.62 Bore Alignment Rods For Suppressor Alignment Tools
$89.00The SureFire-approved way to verify proper suppressor alignment
Precision-machined rod will show any deviation in alignment
Specific rods available for most popular calibers
Caliber
5.56 mm, 6.5 mm, 6.8 mm, 7.62 mm, 9 mm, .338 cal
Construction
Heat-Treated Stainless Steel
Get It Right The First Time. SureFire Bore Rods are valuable tools that will ensure proper concentricity along the bullet flight path when firing suppressed on a new platform. The rod most closely represents the bullet flight path and will show any misalignment, if present. SureFire recommends that operators verify barrel-to-adapter-to-suppressor alignment on any new build or any previously unshot setup, and SureFire Bore Rods are the most effective way to confirm it. Simply choose the corresponding rod for your caliber rifle or carbine. -
Surefire 9mm Bore Alignment Rods For Suppressor Alignment Tools
$125.00The SureFire-approved way to verify proper suppressor alignment
Precision-machined rod will show any deviation in alignment
Specific rods available for most popular calibers
Caliber
5.56 mm, 6.5 mm, 6.8 mm, 7.62 mm, 9 mm, .338 cal
Construction
Heat-Treated Stainless Steel
Get It Right The First Time. SureFire Bore Rods are valuable tools that will ensure proper concentricity along the bullet flight path when firing suppressed on a new platform. The rod most closely represents the bullet flight path and will show any misalignment, if present. SureFire recommends that operators verify barrel-to-adapter-to-suppressor alignment on any new build or any previously unshot setup, and SureFire Bore Rods are the most effective way to confirm it. Simply choose the corresponding rod for your caliber rifle or carbine. -
KAC 5.56mm QDC/CRS-PRT Suppressor – BLK [NFA]
KAC’s Pressure Reduction Technology (PRT) Signature Reduction Device line blends the proven durability and acoustic performance of the previous generation of KAC suppressors with pressure reduction design.
These suppressors are specifically engineered to release the majority of the pressure contained in the device and bore prior to the operating system beginning extraction, which significantly reduces the negative effects of suppressor integration, and reduces felt recoil compared to a traditional suppressor with the same level of sound reduction.
Muzzle flash, and specifically first-round flash, has also been directly addressed and minimized with the PRT design. The Quick Disconnect (QDC) mounting method ensures reduced carbon-lock, as well as minimal but repeatable point of impact shift when transitioning between suppressed and unsuppressed configurations.
For interval maintenance, the PRT devices can be cleaned with commonly used bore solvents or ultrasonic tank cleaning with a water rinse.
The Knight’s Armament 5.56 QDC/CRS-PRT connects to all 5.56 QDC Muzzle Devices.Addition to Bare Muzzle: 5.67? (14.41cm)
Addition to QDC 3-prong FH: 4.15? (10.55cm)
Overall Length: 6.25? (15.88cm)
Weight: 19.2oz (545g)
Sound Reduction: 24dB
![KAC 5.56mm QDC/CRS-PRT Suppressor - BLK [NFA]](https://kfarmory.com/wp-content/uploads/2024/10/KAC_121567-BLK_556-QDC-CRS-PRT-Suppressor-WEB.jpg)
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
Reviews
There are no reviews yet.