$129.00
This modular padded belt system adds versatility to one of the slimmest and sturdiest on the market. All the performance of our original system.
⢠0.75″ thick and 4.25″ tall
⢠Neoprene padding creates a “gel like comfort”
⢠Adds a level of grip that is unlike any other belt system on the market
⢠Individual PALS platforms allow the inner belt to be woven inside or outside of the PALS to satisfy user needs for MOLLE mounting or belt mounting for holsters and other accessories.
⢠Four suspender attachments are positioned strategically if suspenders are needed
⢠Assembled with a removable HPDE stiffener to add stability
Covered by HSGI’sĀ® Lifetime Warranty. Made in the USA.
IF YOU WISH TO ORDER A RIGGER BELT TO MATE WITH THE SGPB, YOU MUST SELECT IT AS AN OPTION WHEN ORDERING. PLEASE BE CAREFUL AND DELIBERATE WHEN SELECTING THE SURE-GRIPĀ® PADDED BELT SIZE VS. THE RIGGER BELT SIZE
TO ACCURATELY DETERMINE THE PROPER SIZE PADDED BELT, TAKE THESE STEPS.
FIRST, DETERMINE THE SIZE GAP YOU WANT IN FRONT BETWEEN ENDS OF THE BELT. MANY PEOPLE PREFER AS LITTLE GAP AS POSSIBLE TO OFFER MORE MOLLE REAL ESTATE TOWARD THE FRONT.
ONCE YOU HAVE THIS DECIDED, TAKE A TAPE MEASURE AROUND YOUR WAIST WHILE WEARING YOUR EVERYDAY BELT. DO NOT BASE YOUR BELT MEASUREMENT ON YOUR PANT SIZE.
FINALLY, SUBTRACT THE GAP YOU WANT FROM THE WAIST MEASUREMENT. ORDER THE PADDED BELT CLOSEST TO THIS FINAL MEASUREMENT. IF YOU CHOOSE THE COBRAĀ® BELT, YOU WILL NEED TO GO UP A FEW INCHES FROM YOUR STANDARD BELT SIZE TO ACCOMMODATE THE ADDED GIRTH CREATED BY PADDED BELT. IF YOU CHOOSE THE DUTY BELT, PLEASE CHOOSE THE CLOSEST WAIST SIZE TO THE LENGTH OF PADDED BELT CHOSEN.
Belt sizes are based on production averages and may vary by approximately one inch in either direction due to the handmade nature of the product.
Below is the total length of the SGPB for sizing:
30.75″ end to end – If you choose a COBRAĀ® belt for this Sure-GripĀ® Padded Belt, the smallest COBRAĀ® you should order is Medium
37.5″ end to end – If you choose a COBRAĀ® belt for this Sure-GripĀ® Padded Belt, the smallest COBRAĀ® you should order is Large
42.5″ end to end – If you choose a COBRAĀ® belt for this Sure-GripĀ® Padded Belt, the smallest COBRAĀ® you should order is XL
46″ end to end – If you choose a COBRAĀ® belt for this Sure-GripĀ® Padded Belt, the smallest COBRAĀ® you should order is 2X
1 in stock
Weight | 1 lbs |
---|---|
Dimensions | 30.75 × 0.5 × 0.5 in |
UPC | 849954016602 |
Trijicon, Bright & Tough Suppressor Height Night Sights, Fits Glock 17/19/22/23/26/27/31/32/33/34/35/37/38/39, Black, White Front, black rear, 3 Dot
Trijicon, RMRcc (Concealed Carry), Micro Reflex Sight, 13mm Objective Lens, 6.5 MOA Red Dot, Black Color
Modular scope cap allows for attaching accessory sighting systems at the left or right 30 degree offset, or in the 12 o’clock position. Compatible with all appropriate size KAC scope mounts.
This KAC 30mm 1-Piece Scope Mount is constructed of lightweight aluminum and is compatible with any Picatinny-type top rail. It is the scope mount that was developed for use in the M110 SASS rifle package. Attaches via a pair of 1/2? bolts. Available in Black or Taupe.
Ring Size: 30mm
Ring Height: 1.5?
Material: Aluminum
Reviews
There are no reviews yet.