Our proprietary LIMA320 Laser Grip Module is designed with a vision to integrate and fit perfectly with our P320 and P250 pistol platforms and bring state-of-the-art laser targeting in a package that is stealth and virtually invisible to the operator. Built with the same material as our standard polymer frames and textured to match, the amazing LIMA320 seamlessly integrates either a red (Oclaro) or direct green (Osram) high quality and high-efficiency laser module for extreme accuracy when it counts. It is powered by a Lithium 1/3n battery in the palm swell, routed with an advanced flex circuit to an intuitive activation button on the leading edge of the grip, and has a laser targeting module incorporated into the dust cover of the pistol. Transform your P320 or P250 in seconds with the revolutionary LIMA320 Laser Grip Module from SIG SAUER.
FEATURES:
• Latest generation 5 mW Red or Green lasers for unmatched runtime
• Ambidextrous switch for easy finger actuation
• Bottom mounted battery compartment allows for easy access without removing the laser
• Windage and Elevation adjustments
• Momentary or continuous on with 5-minute auto-timeout.
• Dependable waterproof and fog-proof performance − IPX-7 rated for complete water immersion up to 1 meter
• The LIMA320 comes with an adjustment tool, CR-1/3N battery, and instruction manual
*Not compatible with the .45ACP or Manual Safety variation of the P320.
Out of stock
Weight | 0.45 lbs |
---|---|
Dimensions | 10.75 × 10.5 × 2 in |
UPC | 798681551989 |
MPN | SOL51001 |
The KAC Keymod Flat Panel Kit includes a set of seven 5.5 polymer rail panels. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black, FDE, Tan or Taupe
Panel Length: 5.5″
Material: Polymer
Quantity: 7
Model: P/N:31190-BLK, 31190-TAN, 31190-TAU
Manufactured by: Knight’s Armament Company
Note On Colors: Tan and Taupe are Knight’s Armament colors, Flat Dark Earth is a match to Magpul FDE
Knight’s Armament crest logo embroidered on the left side and Knight’s Armament embroidered on the right side. Velcro located on front, top and on the back. These are fully customizable with your own patches. Available in black, green, and tan.
Keymod mounted, 7-slot MILSTD 1913 picatinny rail segment. Fits the KAC URX 4 or other Keymod-style rails.
This KAC Keymod Accessory Rail is 3.7″ in length and provides a 7 slot section of mil-spec M1913 Picatinny rail for the addition of tactical accessories. Designed specifically for the URX 4 handguard, this rail section is also compatible with any other rifle handguard that has a Keymod interface. Aluminum construction.
Specifications:
Overall Length: 3.7″
M1913 Picatinny Rail Slots: 7
KAC’s line of Micro Iron Sights are currently in use by the United States Army, Marine Corps and numerous law enforcement agencies worldwide. This is because they are built to exacting tolerances, maintain their zero under adverse conditions and, when folded, have one of the lowest profile top-rail footprints in the industry. Our highly versatile 200-600 Meter Micro Rear Sight features a finger-adjustable, rotating drum that enables shooters to engage targets from 200 to 600 meters with both speed and accuracy.
Specifications:
Material: Steel
Elevation Adjustable: Yes
Windage Adjustable: Yes
Zeroing Tips:
25/300 Meter Zero: Place a target 25 meters down range. Turn the rear sight drum to the ‘Z’ setting and fire a 3 round group(s). Adjust the front sight post and rear sight windage knob until the desired point-of-aim/point-of-impact is achieved. If possible, turn the rear sight drum to the ‘3’ setting and confirm zero at 300 meters. 50/200 Meter Zero: Place a target 50 meters down range. Turn the rear sight drum to the ‘2’ setting and fire a 3 round group(s). Adjust the front sight post and rear sight windage knob until the desired point-of-aim/point-of-impact is achieved. If possible, place a target 200 meters down range and confirm zero.
Reviews
There are no reviews yet.