$305.00
Innovative SureFire light plus watch that keeps your hands free for emergencies
Ergonomically aligns with two-handed firearm grip technique
Variable output; choose between 300, 60 and 15 lumens
Survive The Night Watch. Developed with input from active-duty police officers, the 2211® Signature combines hands-free tactical illumination with a fully integrated timepiece for effective combat use in a broad range of low-light scenarios. When strapped to your support-side wrist, the 2211 Signature automatically aligns with a handgun held with a standard two-handed grip, projecting tremendous light for threat identification at close to medium range in low light and darkness. Its broad MaxVision Beam® generates a seamless wall of white light at three output levels: 300, 60, and 15 lumens, and its bright enough to disrupt an aggressor’s dark-adapted vision, providing a tactical advantage. For a go-anywhere tactical light with a fully integrated timepiece — at an attractive price point to boot — the 2211 Signature WristLight is without equal.
Warning!:
Remove immediately and recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.
Even used batteries may cause severe injury or death.
Call a local poison control center for treatment information.
Non-rechargeable batteries are not to be recharged.
Do not force discharge, recharge, disassemble, heat above (manufacturer’s specified temperature rating), or incinerate. Doing so may result in injury due to venting, leakage, or explosion resulting in chemical burns.
Ensure the batteries are installed correctly according to polarity (+ and -).
Do not mix old and new batteries, different brands, or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries.
Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.
Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.
1 in stock
| Weight | 0.53 lbs |
|---|---|
| Dimensions | 5 × 5 × 3.75 in |
| UPC | 084871325929 |
| MPN | 2211-B-BK-SF |
The KAC Keymod Flat Panel Kit includes a set of seven 5.5 polymer rail panels. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black, FDE, Tan or Taupe
Panel Length: 5.5″
Material: Polymer
Quantity: 7
Model: P/N:31190-BLK, 31190-TAN, 31190-TAU
Manufactured by: Knight’s Armament Company
Note On Colors: Tan and Taupe are Knight’s Armament colors, Flat Dark Earth is a match to Magpul FDE
The KAC URX 4 Rail is a fully modular design that utilizes the revolutionary KeyMod accessory mounting system. The URX 4 Rail is stronger and more stable than previous URX designs due to its one piece construction. It is also lighter due to its Integral Barrel Nut (IBN) system of attachment. The IBN system allows the rail itself to act as the barrel nut when torqued onto the rifle, completely eliminating the need for a separate steel barrel nut. KeyMod accessories may be mounted anywhere along the URX 4s length, making it one of the most user configurable designs on the market. The URX 4 includes two QD sling swivel sockets, one on the left side and one on the right.
Specifications:
Length: 10.75″
Weight: 10.2 oz
Inside Diameter: 1.55″
Outside Diameter: 1.68″ (Side to Side)
Each URX 4 Rail comes complete with an installation wrench, shim kit and instructions. Other lengths available include 8.5″, 10″, 13″, and 14.5″.
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel.
The URX 4 is currently available for 5.56 rifles in 8.5, 10, 10.75″, 13, and 14.5 lengths, and is equipped with Knights unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. The IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut. This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain.
A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knights Armament Company demonstrates its continuing determination to intelligently design effective products.
Two QD sling swivel sockets built in at the rear of the rail. Includes shim kit and installation wrench.
KAC’s line of Micro Iron Sights are currently in use by the United States Army, Marine Corps and numerous law enforcement agencies worldwide. This is because they are built to exacting tolerances, maintain their zero under adverse conditions and, when folded, have one of the lowest profile top-rail footprints in the industry. Our highly versatile 200-600 Meter Micro Rear Sight features a finger-adjustable, rotating drum that enables shooters to engage targets from 200 to 600 meters with both speed and accuracy.
Specifications:
Material: Steel
Elevation Adjustable: Yes
Windage Adjustable: Yes
Zeroing Tips:
25/300 Meter Zero: Place a target 25 meters down range. Turn the rear sight drum to the ‘Z’ setting and fire a 3 round group(s). Adjust the front sight post and rear sight windage knob until the desired point-of-aim/point-of-impact is achieved. If possible, turn the rear sight drum to the ‘3’ setting and confirm zero at 300 meters. 50/200 Meter Zero: Place a target 50 meters down range. Turn the rear sight drum to the ‘2’ setting and fire a 3 round group(s). Adjust the front sight post and rear sight windage knob until the desired point-of-aim/point-of-impact is achieved. If possible, place a target 200 meters down range and confirm zero.
Reviews
There are no reviews yet.