The AMP is a versatile, double-ended pouch that works perfectly as a small IFAK pouch or as a general-purpose pouch. The AMP fits medical supplies, two 5.56 magazines, a poncho or other similarly-sized items.
• Built with heavy-duty nylon
• Dual opening allows easy access from both ends
• Can be mounted vertically on MOLLE and either vertically or horizontally on belts
• Pull tab assists in removing contents
• Features adjustable shock cord for compression of contents or external attachment of items
• Closures secure with an adjustable 1″ side-release buckle
• Large loop fastener panel underneath closure flaps features two separate silencing panels, enabling one or both flaps to secure with hook and loop, or with only the buckle
• External loop fastener panels for attachment of label patches
• Features laser-cut MOLLE sides for attachment of additional items
This product is member tested and recommended by the National Tactical Officers Association (NTOA).
Covered by HSGI’s® Lifetime Warranty. Made in the USA. HSGI® Long Clips included.
Out of stock
| Weight | 0.45 lbs |
|---|---|
| Dimensions | 3.5 × 3.5 × 3.5 in |
| UPC | 849954030035 |
This KAC 34mm Extended Eye Relief 1-Piece Scope Mount is constructed of lightweight aluminum and is compatible with any Picatinny-type top rail. It is canted forward to allow for greater eye relief when using a large variable power optic on a rifle with limited top rail space. Attaches via a pair of 1/2″ bolts.
Ring Size: 34mm
Right Height: 1.5″
Material: Aluminum
Color: Black
The KAC Keymod Flat Panel Kit includes a set of 2 – 5.5 polymer rail panels and one short switch pocket. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. The long panels have 3 cable channels to help with switch cable routing. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black or FDE
Panel Length: 5.5″
Material: Polymer
Model: P/N:31560-BLK, 31560-FDE
Manufactured by: Knight’s Armament Company
*Note: FDE is designed to match Magpul FDE
SR-25 URX wrench. This wrench is required when installing a URX rail system on an SR-25 rifle. Not for use with SR-15 rifles. For the SR-15 URX wrench, use PN:20495.
Replaces the stock plate, ambidextrous. Includes KAC heavy duty 1-1/4″ push-button sling swivel shown.
QD swivel socket is anti-rotation. Receiver extension nut included is now a standard castle nut so a common castle nut wrench can be used for installation.
Reviews
There are no reviews yet.