$1,549.99
The LEGION P226 is finished in Cerakote® Elite LEGION gray coating, custom G-10 grips with a LEGION medallion, the SIG SAUER Electro-Optics X-RAY high visibility day/night sights comes with three magazines. The P226 in DA/SA includes a reduced and contoured Elite beavertail, which allows for a higher grip, but a reduced profile, thus eliminating printing. More aggressive front strap checkering and additional checkering under the trigger guard enhance the grip. An X-Five undercut has been applied to the trigger guard, allowing for a higher grip and greater control. Front cocking serrations provide greater purchase for cycling the action, clearing the firearm, or conducting press checks. The DA/SA is available in 9 mm. The DA/SA also features low profile decocking and slide catch levers to reduce the risk of snagging. An enhanced polished action with the SRT (Short-Reset Trigger) is augmented with a Grayguns, Inc. designed P-SAIT trigger. In addition, a solid steel guide rod adds weight where it matters most.
The P226 LEGION RX SAO variant brings the same feature set to the table in a single-action only package. The addition of the SIG Custom Works Flat Trigger provides an exceptional feel and consistent trigger pull regardless of finger placement. The SAO is available in 9mm.
This firearm is available both with or without a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
1 in stock
Weight | 3.85 lbs |
---|---|
Dimensions | 13.25 × 10 × 3.25 in |
UPC | 798681626649 |
MPN | E26R-9-LEGION-SAORXP |
As one of the flagships of B&T, the APC PRO line represents a breakthrough in customization and modularity on a pistol-caliber platform. Every component is of the highest quality, and is meticulously machined and fitted with the Swiss-made precision that B&T is known for. The APC PRO itself is equipped with several major upgrades such as enhanced lower receiver ergonomics and a side positioned bolt hold open/release. The APC PRO also sports a non-reciprocating, auto-folding charging handle to reduce the risk of snagging on loose clothing/equipment. At the heart of the APC system is the hydraulic shock-absorbing buffer system which greatly mitigates recoil and enhances overall accuracy. In terms of customization, the APC PRO features a flattop picatinny rail for optics as well as a an under-barrel rail for lights/lasers. Each APC PRO unit also has a variety of B&T made accessories including brass-catchers, extended magazines, and fore-grips designed specifically for that model. In addition, many aspects of the APC PRO are reminiscent of the AR-15, such as the ambidextrous selector switch, the ergonomics, trigger assembly and accepts AR-15 style grips. These similarities make for a better shooting experience for someone already acquainted with the AR-15. This APC9 PRO-G’s lower receiver has also been outfitted to accept the widely available Glock magazines, including the 22 round extended magazine.
Features of the B&T APC9K PRO:
Non-reciprocating, auto-folding charging handle
Hydraulic shock absorbing buffer
Ambidextrous safety
Accessories available
The BT APC9 pistol with polymer frame; removable polymer grips; 5.5” barrel; low profile adjustable sights; dual auto-folding, non-reciprocating charging handle; side positioned bolt hold open/release; Magpul M-Lok accessory slots; closed bolt direct blowback system; hydraulic shock absorbing buffer; ambidextrous safety; 33-round magazine; and coyote tan finish.
The B&T APC9K, made up of the highest quality, meticulously machined components fitted with the Swiss-made precision that B&T is known for, brings a new level of performance and adaptability to the APC platform.
At the heart of this pistol’s operation is a hydraulic shock-absorbing buffer system that greatly mitigates recoil and enhances overall accuracy. More features of the BT APC9K include a 9mm-chambered barrel that is just 5.5 inches long; folding low profile adjustable sights for faster target acquisition; a dual auto-folding, non-reciprocating charging handle that hardly snags on loose clothing/equipment; ambidextrous controls including a safety selector switch; as well as improved lower receiver ergonomics including a flattop Picatinny rail for optics, an under-barrel rail for lights/lasers, a side positioned bolt hold open/release, and removable M4-compatible grips.
Shipped with a 33-round extended magazine, this B&T APC9K Pro for sale comes with a lower receiver outfitted to also accept widely available Glock magazines. The B&T APC9K Pro Glock magazine-compatible is in addition designed to accept an SB Tactical brace.
The P229 Elite Compact model take the same features common to all Elite series pistols and combine them with the ergonomic one-piece grips. The P229 Elite Compact builds on the exceptional reputation of out-of-the-box accuracy with the addition of SIG’s Short Reset Trigger or SRT. The SRT provides you the same great safety and smooth action of the SIG DA/SA with a comfortable short reset for faster trigger return and surgical control during high speed shooting. The P229 Elite Compact features a Beavertail frame, front strap checking and comes with SIGLITE Night Sights, and new to 2024, optics ready standard out of the box.
This firearm is not available with a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
Optic-Ready Steel Slide With Front and Rear Cocking Serrations
Alloy Frame with Beavertail and Accessory Rail
One-Piece Ergonomic Polymer Grip
DA/SA Short-Reset Trigger
SIGlite Night Sights
(2) 15-Round or (2) 10-Round Steel Magazines
Connects to all 5.56 QDC Muzzle Devices. Available in Black and Flat Dark Earth (-BLK) (-FDE).
Specifications
Addition to Bare Muzzle: 3.85″ (9.78cm)
Addition to QDC 3-prong FH: 2.33″ (5.92cm)
Overall Length: 4.43″ (11.25cm)
Weight: 13.9oz (395g)
Sound Reduction: 12dB
Reviews
There are no reviews yet.