$1,549.99
The LEGION P226 is finished in Cerakote® Elite LEGION gray coating, custom G-10 grips with a LEGION medallion, the SIG SAUER Electro-Optics X-RAY high visibility day/night sights comes with three magazines. The P226 in DA/SA includes a reduced and contoured Elite beavertail, which allows for a higher grip, but a reduced profile, thus eliminating printing. More aggressive front strap checkering and additional checkering under the trigger guard enhance the grip. An X-Five undercut has been applied to the trigger guard, allowing for a higher grip and greater control. Front cocking serrations provide greater purchase for cycling the action, clearing the firearm, or conducting press checks. The DA/SA is available in 9 mm. The DA/SA also features low profile decocking and slide catch levers to reduce the risk of snagging. An enhanced polished action with the SRT (Short-Reset Trigger) is augmented with a Grayguns, Inc. designed P-SAIT trigger. In addition, a solid steel guide rod adds weight where it matters most.
The P226 LEGION RX SAO variant brings the same feature set to the table in a single-action only package. The addition of the SIG Custom Works Flat Trigger provides an exceptional feel and consistent trigger pull regardless of finger placement. The SAO is available in 9mm.
This firearm is available both with or without a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
1 in stock
Weight | 3.85 lbs |
---|---|
Dimensions | 13.25 × 10 × 3.25 in |
UPC | 798681626649 |
MPN | E26R-9-LEGION-SAORXP |
KAC’s iconic Ribbed Rail Panels have seen use all over the globe on US military M4 Carbines. The lightweight polymer panels are ribbed for an enhanced grip, and help insulate the support hand from barrel heat. While originally designed for use on the KAC M4 RIS and M4 RAS rails, these panels are also compatible with many other railed handguards.
Material: Polymer
Ribs: 6
Length: 3.90″
Color: Black, Taupe
Height: 1.9″
Fits any MIL-STD-1913 rail system.
The KAC URX 4 Rail is a fully modular design that utilizes the revolutionary KeyMod accessory mounting system. The URX 4 Rail is stronger and more stable than previous URX designs due to its one piece construction. It is also lighter due to its Integral Barrel Nut (IBN) system of attachment. The IBN system allows the rail itself to act as the barrel nut when torqued onto the rifle, completely eliminating the need for a separate steel barrel nut. KeyMod accessories may be mounted anywhere along the URX 4s length, making it one of the most user configurable designs on the market. The URX 4 includes two QD sling swivel sockets, one on the left side and one on the right.
Specifications:
Length: 10.75″
Weight: 10.2 oz
Inside Diameter: 1.55″
Outside Diameter: 1.68″ (Side to Side)
Each URX 4 Rail comes complete with an installation wrench, shim kit and instructions. Other lengths available include 8.5″, 10″, 13″, and 14.5″.
Keymod mounted, 7-slot MILSTD 1913 picatinny rail segment. Fits the KAC URX 4 or other Keymod-style rails.
This KAC Keymod Accessory Rail is 3.7″ in length and provides a 7 slot section of mil-spec M1913 Picatinny rail for the addition of tactical accessories. Designed specifically for the URX 4 handguard, this rail section is also compatible with any other rifle handguard that has a Keymod interface. Aluminum construction.
Specifications:
Overall Length: 3.7″
M1913 Picatinny Rail Slots: 7
Reviews
There are no reviews yet.