The Operator COBRA® IDR 1.75″ Rigger Belt is a low-profile shooter’s belt designed to work with both MOLLE and belt-mounted gear. This two-belt system is overbuilt, like all HSGI® gear, to outlast the competition.

• Built with two layers of military-grade Type 13 nylon webbing
• Proprietary construction process provides additional rigidity and stiffness
• Features additional layer of 1.5″ webbing to form industry-standard columns of MOLLE for use with MOLLE pouches and holsters
• Double-needle binding along upper and lower edges of 1.5″ webbing for added durability
• Includes your choice of HSGI® Inner Belt or Micro Grip Belt Panel to mate with the Operator’s interior hook fastener
• Two-belt setup enables the easy donning and removal of belt
• Features patented COBRA® integrated D-ring buckle with matte black finish

*Use actual measurements and not pant size when picking your belt size*

Belt sizes are based on production averages and may vary by approximately one inch in either direction due to the handmade nature of the product.

Small – 29″-31″
Medium – 32″-34″
Large – 35″-37″
XL – 40″-42″
2X – 44″-46″
3X – 48″-50″

Size Chart

This product is member tested and recommended by the National Tactical Officers Association (NTOA).

Covered by HSGI’s® Lifetime Warranty. Made in the USA.

**HSGI’s® rigger belts are NOT labeled or certified for climbing or use as Life Saving Equipment. HSGI® will not be held responsible for any injuries or death for the misuse of any of our products.**

This modular padded belt system adds versatility to one of the slimmest and sturdiest on the market. All the performance of our original system.

• 0.75″ thick and 4.25″ tall
• Neoprene padding creates a “gel like comfort”
• Adds a level of grip that is unlike any other belt system on the market
• Individual PALS platforms allow the inner belt to be woven inside or outside of the PALS to satisfy user needs for MOLLE mounting or belt mounting for holsters and other accessories.
• Four suspender attachments are positioned strategically if suspenders are needed
• Assembled with a removable HPDE stiffener to add stability

Covered by HSGI’s® Lifetime Warranty. Made in the USA.

This new version is of our modular padded belt system is constructed with a laser-cut, proprietary heavy-duty nylon laminate. This belt’s slotted design allows inner belts to be woven under and over the MOLLE panels, making it compatible with both MOLLE and belt-mounted pouches and holsters. Our proprietary neoprene padding adds comfort while offering excellent grip and performance. The rear features an extra row of laser-cut MOLLE for larger pouches and additional comfort.

• Neoprene padding provides a “gel-like” comfort and unsurpassed grip
• Additional row of laser-cut PALS on wide back panel for comfort and larger pouches
• Individual laser-cut PALS panels allow the innerbelt to be woven inside or outside of the PALS to satisfy user needs for MOLLE mounting or belt mounting holsters and other accessories
• Assembled with an HDPE stiffener for added stability

Covered by HSGI’s® Lifetime Warranty. Made in the USA.

IF YOU WISH TO ORDER A COBRA® RIGGER BELT TO MATE WITH THE SURE-GRIP® PADDED BELT, YOU MUST SELECT IT AS AN OPTION WHEN ORDERING. PLEASE BE CAREFUL AND DELIBERATE WHEN SELECTING THE SURE-GRIP® PADDED BELT SIZE VS. THE RIGGER BELT SIZE
TO ACCURATELY DETERMINE THE PROPER SIZE PADDED BELT, TAKE THESE STEPS.

FIRST, DETERMINE THE SIZE GAP YOU WANT IN FRONT BETWEEN ENDS OF THE BELT. MANY PEOPLE PREFER AS LITTLE GAP AS POSSIBLE TO OFFER MORE MOLLE REAL ESTATE TOWARD THE FRONT.
ONCE YOU HAVE THIS DECIDED, TAKE A TAPE MEASURE AROUND YOUR WAIST WHILE WEARING YOUR EVERYDAY BELT. DO NOT BASE YOUR BELT MEASUREMENT ON YOUR PANT SIZE.
FINALLY, SUBTRACT THE GAP YOU WANT FROM THE WAIST MEASUREMENT. ORDER THE PADDED BELT CLOSEST TO THIS FINAL MEASUREMENT. IF YOU CHOOSE THE COBRA® BELT, YOU WILL NEED TO GO UP A FEW INCHES FROM YOUR STANDARD BELT SIZE TO ACCOMMODATE THE ADDED GIRTH CREATED BY PADDED BELT. IF YOU CHOOSE THE DUTY BELT, PLEASE CHOOSE THE CLOSEST WAIST SIZE TO THE LENGTH OF PADDED BELT CHOSEN.

Belt sizes are based on production averages and may vary by approximately one inch in either direction due to the handmade nature of the product.

Below is the total length of the SGPB for sizing:
31″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is Medium
36.5″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is Large
41.5″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is XL
46.75″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is 2X

This new version is of our modular padded belt system is constructed with a laser-cut, proprietary heavy-duty nylon laminate. This belt’s slotted design allows inner belts to be woven under and over the MOLLE panels, making it compatible with both MOLLE and belt-mounted pouches and holsters. Our proprietary neoprene padding adds comfort while offering excellent grip and performance. The rear features an extra row of laser-cut MOLLE for larger pouches and additional comfort.

• Neoprene padding provides a “gel-like” comfort and unsurpassed grip
• Additional row of laser-cut PALS on wide back panel for comfort and larger pouches
• Individual laser-cut PALS platforms allow the innerbelt to be woven inside or outside of the PALS to satisfy user needs for MOLLE mounting or belt mounting holsters and other accessories
• Assembled with an HDPE stiffener for added stability

Covered by HSGI’s® Lifetime Warranty. Made in the USA.

This new version is of our modular padded belt system is constructed with a laser-cut, proprietary heavy-duty nylon laminate. This belt’s slotted design allows inner belts to be woven under and over the MOLLE panels, making it compatible with both MOLLE and belt-mounted pouches and holsters. Our proprietary neoprene padding adds comfort while offering excellent grip and performance. The rear features an extra row of laser-cut MOLLE for larger pouches and additional comfort.

• Neoprene padding provides a “gel-like” comfort and unsurpassed grip
• Additional row of laser-cut PALS on wide back panel for comfort and larger pouches
• Individual laser-cut PALS panels allow the innerbelt to be woven inside or outside of the PALS to satisfy user needs for MOLLE mounting or belt mounting holsters and other accessories
• Assembled with an HDPE stiffener for added stability

Covered by HSGI’s® Lifetime Warranty. Made in the USA.

IF YOU WISH TO ORDER A COBRA® RIGGER BELT TO MATE WITH THE SURE-GRIP® PADDED BELT, YOU MUST SELECT IT AS AN OPTION WHEN ORDERING. PLEASE BE CAREFUL AND DELIBERATE WHEN SELECTING THE SURE-GRIP® PADDED BELT SIZE VS. THE RIGGER BELT SIZE
TO ACCURATELY DETERMINE THE PROPER SIZE PADDED BELT, TAKE THESE STEPS.

FIRST, DETERMINE THE SIZE GAP YOU WANT IN FRONT BETWEEN ENDS OF THE BELT. MANY PEOPLE PREFER AS LITTLE GAP AS POSSIBLE TO OFFER MORE MOLLE REAL ESTATE TOWARD THE FRONT.
ONCE YOU HAVE THIS DECIDED, TAKE A TAPE MEASURE AROUND YOUR WAIST WHILE WEARING YOUR EVERYDAY BELT. DO NOT BASE YOUR BELT MEASUREMENT ON YOUR PANT SIZE.
FINALLY, SUBTRACT THE GAP YOU WANT FROM THE WAIST MEASUREMENT. ORDER THE PADDED BELT CLOSEST TO THIS FINAL MEASUREMENT. IF YOU CHOOSE THE COBRA® BELT, YOU WILL NEED TO GO UP A FEW INCHES FROM YOUR STANDARD BELT SIZE TO ACCOMMODATE THE ADDED GIRTH CREATED BY PADDED BELT. IF YOU CHOOSE THE DUTY BELT, PLEASE CHOOSE THE CLOSEST WAIST SIZE TO THE LENGTH OF PADDED BELT CHOSEN.

Belt sizes are based on production averages and may vary by approximately one inch in either direction due to the handmade nature of the product.

Below is the total length of the SGPB for sizing:
31″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is Medium
36.5″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is Large
41.5″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is XL
46.75″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is 2X