$203.00
The Operator COBRA® IDR 1.75″ Rigger Belt is a low-profile shooter’s belt designed to work with both MOLLE and belt-mounted gear. This two-belt system is overbuilt, like all HSGI® gear, to outlast the competition.
• Built with two layers of military-grade Type 13 nylon webbing
• Proprietary construction process provides additional rigidity and stiffness
• Features additional layer of 1.5″ webbing to form industry-standard columns of MOLLE for use with MOLLE pouches and holsters
• Double-needle binding along upper and lower edges of 1.5″ webbing for added durability
• Includes your choice of HSGI® Inner Belt or Micro Grip Belt Panel to mate with the Operator’s interior hook fastener
• Two-belt setup enables the easy donning and removal of belt
• Features patented COBRA® integrated D-ring buckle with matte black finish
*Use actual measurements and not pant size when picking your belt size*
Belt sizes are based on production averages and may vary by approximately one inch in either direction due to the handmade nature of the product.
Small – 29″-31″
Medium – 32″-34″
Large – 35″-37″
XL – 40″-42″
2X – 44″-46″
3X – 48″-50″
Size Chart
This product is member tested and recommended by the National Tactical Officers Association (NTOA).
Covered by HSGI’s® Lifetime Warranty. Made in the USA.
**HSGI’s® rigger belts are NOT labeled or certified for climbing or use as Life Saving Equipment. HSGI® will not be held responsible for any injuries or death for the misuse of any of our products.**
1 in stock
Weight | 1.1 lbs |
---|---|
Dimensions | 42 × 1.75 × 1.75 in |
UPC | 849954026236 |
Trijicon Bright & Tough™ Night Sight Suppressor Set — White Front/Black Rear with Green Lamps — for Glock® Models 17, 17L, 19, 22, 23, 24, 25, 26, 27, 28, 31, 32, 33, 34, 35, 37, 38 and 39
TRIJICON 6.1MM REAR STD FRNT BAGGED SIGHT SET GLOCK STD FRAME GEN 5(NR17A25 AND NF17A24)
The KAC Keymod Flat Panel Kit includes a set of 2 – 5.5 polymer rail panels and one short switch pocket. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. The long panels have 3 cable channels to help with switch cable routing. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black or FDE
Panel Length: 5.5″
Material: Polymer
Model: P/N:31560-BLK, 31560-FDE
Manufactured by: Knight’s Armament Company
*Note: FDE is designed to match Magpul FDE
This KAC 30mm 1-Piece Scope Mount is constructed of lightweight aluminum and is compatible with any Picatinny-type top rail. It is the scope mount that was developed for use in the M110 SASS rifle package. Attaches via a pair of 1/2? bolts. Available in Black or Taupe.
Ring Size: 30mm
Ring Height: 1.5?
Material: Aluminum
Reviews
There are no reviews yet.