$750.00
Product Details
THE ACRO P-2 IN SNIPER GREY.
Aimpoint® has once again advanced the standard for pistol mounted optics with the introduction of the Acro P-2™ red dot sight. Thisnext generation sight incorporates an improved LED emitter coupled with a higher capacity CR2032 battery to provide an astonishing five years (50,000 hours) of constant-on power while getting you on target faster and more accurately. Designed to endure the physical forces generated by semi-automatic pistol slides, the ACRO™ series was the first pistol sight to offer a fully enclosed optical channel to protect the LED emitte.Built to exceed the requirements of professional users, the Acro P-2 has been tested and proven to withstand the extreme shock, vibration, temperatures, and material stresses generated by firing over 20,000 rounds of .40 S&W ammunition. The new high efficiency LED emitter provides a sharp 3.5 MOA dot. Protective clear glass front and rear lenses guard the advanced reflective lens system. The new digital intensity adjustment keypad provides a more distinct tactile feel when adjusting the dot intensity, and these controls are now placed next to the battery compartment to help protect the power adjustments against unintentional changes. In addition to use as a primary optic on handguns, the Acro P-2 can be mounted on carbines, shotguns and rifles or utilized as a backup sight on magnified scopes and thermal imagers. The sight can be mounted on a wide range of optics-ready handguns using adapter plates. It is night vision compatible, and the dot can also be turned up for use in bright sunlight. Aimpoint red dot sights are operationally parallax-free, which means the visible dot remains parallel to the bore of your weapon no matter what angle your eye is in relation to the sight. Therefore, the user never has to worry about centering the dot inside the sight. If you have a proper zero, when the dot is on the target, so are you. Aimpoint red dot sights increase confidence by allowing the shooter to focus on the target while keeping both eyes open, fully situationally aware at all times. Users can achieve first round hits faster with greater confidence. The matte finish of the Cerakote® may cause a patina on the housing in transit.
UNIQUE FEATURES
3.5 MOA red dot for precision and fast target acquisition
Battery life: 50,000 hours (over 5 years) of constant operation with one battery on setting 6
Battery type: CR2032 battery (battery included)
Battery can be quickly changed without removing optic
Variety of mounting options sold separately
Optimized for pistol and applications which require a low-profile red dot system
Fully enclosed housing protects all electronic components of the sight from all elements
Sealed optical channel protects the optic from rain, mud, sand, or snow
7075-T6 High-strength Aluminum Hard-anodized with Cerakoate H-Series grey coating
10 brightness settings: 4 night vision compatible settings and 6 daylight settings
1X (non-magnifying) operationally parallax free optic
Submersible to 115 feet (35 meters)
Temperature span -49°F to +160°F
Weight 2.1 oz / 60 g (sight only)
Size 1.9” x 1.3” x 1.2” (L x W x H)
2 in stock
Weight | 0.3 lbs |
---|---|
Dimensions | 4.75 × 4.5 × 2.75 in |
MPN | AP-200871-SG-39-QD |
pfid | 13457 |
Product Details
The Aimpoint® 6XMag-1 Magnifier is a 6x power magnifying module built to withstand the demands of professional end-users. The 6XMag-1™ can be paired with an Aimpoint red dot sight for target acquisition at longer distances or used as a 6X hand-held monocular. The 6XMag-1 magnifier is optimized for use with the Micro T-2™/H-2™ and CompM5™ series of sights providing a clear, crisp 2 MOA dot under 6x magnification. Centering the dot within the magnifier is quick and easy with the intuitive module windage and elevation adjustments.
The 6XMag-1 magnifier is submersible up to 80 feet, fully shockproof, and can withstand temperatures ranging from -49°F to +160°F. The protective rubber cover provides the ideal ergonomic grip when used as a hand-held device. The 3-degree field of view (FOV) allows for a generous sight picture. A variable (-3 to +3) dioptric setting allows the magnifier to be adapted to the individual’s eye. This magnifier configuration comes with the Aimpoint® TwistMount that attaches easily to a picatinny rail (MIL-STD-1913). The TwistMount™ holds the magnifier in place behind the red dot sight on the optical axis and can be quickly detached when no magnification is needed. Aimpoint magnifiers mount behind the Aimpoint sights eliminating the need for re-zeroing when shifting between non-magnified and magnified aiming.
UNIQUE FEATURES
6X Optical Magnification
Compatible with Aimpoint Micro T-2 / H-2 and CompM5/M5s/M5b red dot sights for longer range aiming or observation
Variable (-3 to +3) dioptric setting
Equipped with TwistMount for easy picatinny rail (MIL-STD-1913) attachment and removal
Can also be used as a handheld 6X monocular
No re-zeroing needed when shifting between non-magnified and magnified aiming – utilizes the red dot in Aimpoint sights as the aiming reticle
Ergonomic design for sure grip when used as a handheld observation tool
Shockproof and Waterproof
Screws and Allen key included
Field of view (FOV): 3°
Eye relief: 2.8 in (70 mm)
Submersible to 80 feet (25 meters)
Temperature span -49°F to +160°F
Weight 8.8 oz / 250 g (magnifier only)
Trijicon, DI Tritium/Fiber Optic Night Sights, Fits Glock 17,19,22,23,34,35,45, Does Not Fit MOS Models, Includes 2 Green Fiber Replacement Pieces and T10 Torque L-Key
Scope mount for day optics.1.94″ right height and forward position for extended eye relief. One piece construction.
Ring Size: 34mm
Right Height: 1.94″
Weight: 7.4oz
The KAC Rail Mounted Anti-Cant Device is a simple, low profile tool that helps precision shooters ensure that their rifle is level before breaking a shot. It incorporates a small bubble level into an aluminum base that sits low enough to permit its use under most optics. Attaches to any M1913 Picatinny rail surface via a screw and clamp arrangement.
Features:
M1913 Picatinny rail attachment
Low profile
Aluminum construction