$625.00
APC9 Pro Semi Auto Glock Compatible Trigger Group TAN
(BT-36965-CT)
Use to allow your existing B&T APC9 Pro, GHM9 Gen 2, or SPC9 to accept Glock magaziness with no additional modifications!
1 in stock
BT-36965
Weight | 2.5 lbs |
---|---|
Dimensions | 10 × 6.5 × 2 in |
UPC | 840225702798 |
MPN | BT-36965 |
The P226 is the pistol that set the standard by which all other combat handguns are measured. Designed as SIG’s entrant in the military trials to replace the 1911, today the P226 is in use by the U.S. Navy SEALs, Federal agents, and numerous law enforcement agencies including the Texas Rangers, Ohio State Highway Patrol and the Michigan State Police to name a few. The exceptional ergonomics and balance make this full-size pistol easy to handle. Available in 9mm and new to 2024, optics ready standard out of the box
This firearm is not available with a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
The LEGION P229 is finished in a Cerakote® Elite LEGION gray coating, custom G-10 grips with a LEGION medallion, the new SIG SAUER Electro-Optics X-RAY high visibility day/night sights and will ship with three magazines. The P229 in DA/SA include a reduced and contoured Elite beavertail, which allows for a higher grip, but a reduced profile, thus eliminating printing. More aggressive front strap checkering and additional checkering under the trigger guard enhance the grip. An X-Five undercut has been applied to the trigger guard, allowing for a higher grip and greater control. Front cocking serrations provide greater purchase for cycling the action, clearing the firearm, or conducting press checks. The pistol is available in 9 mm and also features low profile decocking and slide catch levers to reduce the risk of snagging. An enhanced polished action with the SRT (Short-Reset Trigger) is augmented with a Grayguns, Inc. designed P-SAIT trigger. In addition, a solid steel guide rod adds weight where it matters most.
This firearm is available both with or without a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
The SR-25 E2 APC series is the latest evolution of the dual role 7.62 mm NATO Carbine and Rifle. Each are equally adept at putting rounds on target past 800 meters or rapid multi-shot engagement at close range, with a barrel and bolt life to support the training regimen necessary to master these skills. An ambidextrous bolt release, selector, and magazine release offer the left-handed user the ergonomic advantages inherent to AR15 based controls, as well as giving right-handed users alternate methods of manipulation to increase efficiency of movement. The drop-in 2-stage trigger serves double duty as an aid to long range precision marksmanship while enabling surgical speed shooting at close range. A 7.62 QDC Flash Suppressor reduces flash and ground disturbance, and supports KAC QDC Signature Reduction Devices.
SR-25 E2 APC M-LOK
P/N:31955
Barrel:
16″ (40 cm) 5R Cut 1:10 Twist
Caliber:
7.62 mm NATO / .308 Win
Weight:
9 lbs (4.1 kg)
Length:
35.75″ (91 cm) to 39.5″ (100 cm)
to 39.5″ (100 cm)
KAC’s newest answer for a superior rifle suppressor 3D printed and incorporating their Pressure Reduction Technology (PRT)
KAC PN 121567-BLK & 121567-FDE
Connects to all 5.56 QDC Muzzle Devices. Available in Black and Flat Dark Earth (-BLK) (-FDE).
Specifications
Addition to Bare Muzzle: 5.67″ (14.41cm)
Addition to QDC 3-prong FH: 4.15″ (10.55cm)
Overall Length: 6.25″ (15.88cm)
Weight: 19.2oz (545g)
Sound Reduction: 24dB
Regulations
This is a regulated item and requires shipment to a FFL/SOT holder. After you have placed your order, please have your order number and a copy of your preferred store’s FFL/SOT emailed to info@rooftopdefense.com to avoid delays. After I have received their FFL/SOT, I will file a Form 3. Upon approval, I will ship your order as soon as possible!
Reviews
There are no reviews yet.