$203.00
The Operator COBRA® IDR 1.75″ Rigger Belt is a low-profile shooter’s belt designed to work with both MOLLE and belt-mounted gear. This two-belt system is overbuilt, like all HSGI® gear, to outlast the competition.
• Built with two layers of military-grade Type 13 nylon webbing
• Proprietary construction process provides additional rigidity and stiffness
• Features additional layer of 1.5″ webbing to form industry-standard columns of MOLLE for use with MOLLE pouches and holsters
• Double-needle binding along upper and lower edges of 1.5″ webbing for added durability
• Includes your choice of HSGI® Inner Belt or Micro Grip Belt Panel to mate with the Operator’s interior hook fastener
• Two-belt setup enables the easy donning and removal of belt
• Features patented COBRA® integrated D-ring buckle with matte black finish
*Use actual measurements and not pant size when picking your belt size*
Belt sizes are based on production averages and may vary by approximately one inch in either direction due to the handmade nature of the product.
Small – 29″-31″
Medium – 32″-34″
Large – 35″-37″
XL – 40″-42″
2X – 44″-46″
3X – 48″-50″
Size Chart
This product is member tested and recommended by the National Tactical Officers Association (NTOA).
Covered by HSGI’s® Lifetime Warranty. Made in the USA.
**HSGI’s® rigger belts are NOT labeled or certified for climbing or use as Life Saving Equipment. HSGI® will not be held responsible for any injuries or death for the misuse of any of our products.**
1 in stock
Weight | 1.1 lbs |
---|---|
Dimensions | 30 × 1.75 × 1.75 in |
UPC | 849954026052 |
Trijicon, Bright & Tough Suppressor Height Night Sights, Fits Glock 17/19/22/23/26/27/31/32/33/34/35/37/38/39, Black, White Front, black rear, 3 Dot
3″ (76mm) long 4 slot section of MILSTD-1913 Picatinny rail for the addition of legacy accessories, with integrated QD sling swivel socket. Aluminum construction.
The KAC Rail Mounted Anti-Cant Device is a simple, low profile tool that helps precision shooters ensure that their rifle is level before breaking a shot. It incorporates a small bubble level into an aluminum base that sits low enough to permit its use under most optics. Attaches to any M1913 Picatinny rail surface via a screw and clamp arrangement.
Features:
M1913 Picatinny rail attachment
Low profile
Aluminum construction
Scope mount for day optics.1.94″ right height and forward position for extended eye relief. One piece construction.
Ring Size: 30mm
Right Height: 1.94″
Weight: 7.4oz
Reviews
There are no reviews yet.