$129.00
This modular padded belt system adds versatility to one of the slimmest and sturdiest on the market. All the performance of our original system.
• 0.75″ thick and 4.25″ tall
• Neoprene padding creates a “gel like comfort”
• Adds a level of grip that is unlike any other belt system on the market
• Individual PALS platforms allow the inner belt to be woven inside or outside of the PALS to satisfy user needs for MOLLE mounting or belt mounting for holsters and other accessories.
• Four suspender attachments are positioned strategically if suspenders are needed
• Assembled with a removable HPDE stiffener to add stability
Covered by HSGI’s® Lifetime Warranty. Made in the USA.
IF YOU WISH TO ORDER A RIGGER BELT TO MATE WITH THE SGPB, YOU MUST SELECT IT AS AN OPTION WHEN ORDERING. PLEASE BE CAREFUL AND DELIBERATE WHEN SELECTING THE SURE-GRIP® PADDED BELT SIZE VS. THE RIGGER BELT SIZE
TO ACCURATELY DETERMINE THE PROPER SIZE PADDED BELT, TAKE THESE STEPS.
FIRST, DETERMINE THE SIZE GAP YOU WANT IN FRONT BETWEEN ENDS OF THE BELT. MANY PEOPLE PREFER AS LITTLE GAP AS POSSIBLE TO OFFER MORE MOLLE REAL ESTATE TOWARD THE FRONT.
ONCE YOU HAVE THIS DECIDED, TAKE A TAPE MEASURE AROUND YOUR WAIST WHILE WEARING YOUR EVERYDAY BELT. DO NOT BASE YOUR BELT MEASUREMENT ON YOUR PANT SIZE.
FINALLY, SUBTRACT THE GAP YOU WANT FROM THE WAIST MEASUREMENT. ORDER THE PADDED BELT CLOSEST TO THIS FINAL MEASUREMENT. IF YOU CHOOSE THE COBRA® BELT, YOU WILL NEED TO GO UP A FEW INCHES FROM YOUR STANDARD BELT SIZE TO ACCOMMODATE THE ADDED GIRTH CREATED BY PADDED BELT. IF YOU CHOOSE THE DUTY BELT, PLEASE CHOOSE THE CLOSEST WAIST SIZE TO THE LENGTH OF PADDED BELT CHOSEN.
Belt sizes are based on production averages and may vary by approximately one inch in either direction due to the handmade nature of the product.
Below is the total length of the SGPB for sizing:
30.75″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is Medium
37.5″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is Large
42.5″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is XL
46″ end to end – If you choose a COBRA® belt for this Sure-Grip® Padded Belt, the smallest COBRA® you should order is 2X
1 in stock
Weight | 1 lbs |
---|---|
Dimensions | 30.75 × 0.5 × 0.5 in |
UPC | 849954016602 |
Trijicon Bright & Tough™ Night Sight Suppressor Set — White Front/Black Rear with Green Lamps — for Glock® Models 17, 17L, 19, 22, 23, 24, 25, 26, 27, 28, 31, 32, 33, 34, 35, 37, 38 and 39
QD socket mount to move sling rearward on the handguard while maintaining the lowest possible profile.
The SR-15 Field Repair Kit includes the essential components to keep your rifle running over the long term. Also compatible with SR-16 variants.
Field Repair Kit Contents
(2x) Ejector
(1x) Ejector Roll Pin
(2x) Ejector Spring
(1x) Extractor
(1x) Extractor Pivot Pin
(2x) Extractor Springs, Heavy
(1x) Cam Pin
(1x) Firing Pin
(1x) Firing Pin Retainer Pin
(3x) Gas Rings
The KAC Keymod Flat Panel Kit includes a set of 2 – 5.5 polymer rail panels and one short switch pocket. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. The long panels have 3 cable channels to help with switch cable routing. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black or FDE
Panel Length: 5.5″
Material: Polymer
Model: P/N:31560-BLK, 31560-FDE
Manufactured by: Knight’s Armament Company
*Note: FDE is designed to match Magpul FDE
Reviews
There are no reviews yet.