![KFA_2025_Classic Logo_Red [HIREZ-FINAL01]](https://kfarmory.com/wp-content/uploads/2025/06/KFA_2025_Classic-Logo_Red-HIREZ-FINAL01-1-scaled.png#117002){kind=logo}
LMT 11.5″ 5.56 Chrome Lined MRP Barrel
CQB MRP® 11.5” CHROME LINED 1:7” TWIST 5.56 BARREL
Out of stock
Email when stock available
11.5″ Chrome Lined 5.56×45 (.223) 1:7″ RH twist barrel
Designed for the LMT monolithic receiver, this barrel utilizes a low profile gas block, carbine length straight gas tube, and A2 birdcage for reduced flash. The barrel is coated and cryogenically treated for long term durability.
| Weight | 7 lbs |
|---|---|
| Dimensions | 14 × 12 × 8 in |
| UPC | 7557000000000 |
Related products
-
KAC Bubble Level Anti Cant Device, Picatinny
The KAC Rail Mounted Anti-Cant Device is a simple, low profile tool that helps precision shooters ensure that their rifle is level before breaking a shot. It incorporates a small bubble level into an aluminum base that sits low enough to permit its use under most optics. Attaches to any M1913 Picatinny rail surface via a screw and clamp arrangement.
Features:
M1913 Picatinny rail attachment
Low profile
Aluminum construction -
KAC 35mm Modular Scope Cap
Modular scope cap allows for attaching accessory sighting systems at the left or right 30 degree offset, or in the 12 o’clock position. Compatible with all appropriate size KAC scope mounts.
-
KAC Keymod Wire Management Panel Kit, URX 4, Flat Dark Earth (FDE)
$20.11The KAC Keymod Flat Panel Kit includes a set of 2 – 5.5 polymer rail panels and one short switch pocket. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. The long panels have 3 cable channels to help with switch cable routing. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black or FDE
Panel Length: 5.5″
Material: Polymer
Model: P/N:31560-BLK, 31560-FDE
Manufactured by: Knight’s Armament Company
*Note: FDE is designed to match Magpul FDE -
KAC SR-25 URX Wrench
SR-25 URX wrench. This wrench is required when installing a URX rail system on an SR-25 rifle. Not for use with SR-15 rifles. For the SR-15 URX wrench, use PN:20495.
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
Reviews
There are no reviews yet.