![KFA_2025_Classic Logo_Red [HIREZ-FINAL01]](https://kfarmory.com/wp-content/uploads/2025/06/KFA_2025_Classic-Logo_Red-HIREZ-FINAL01-1-scaled.png#117002){kind=logo}
LMT MRP-L Shovelnose Upper Receiver – 11.5″, Stripped
$939.00
The “Shovelnose” MRP upper was designed specifically for shooters who need more room for mounting accessories when using LMT piston barrels. The upper features a larger internal diameter allowing for the installation and removal of any LMT barrel without removing MLOK add-ons.
The patented LMT monolithic rail platform (MRP) upper receiver, has a receiver and handguard that are made from a single piece of aerospace grade aluminum. The barrel is held in place with a proprietary locking system that utilizes two locking bolts accessible from the right side of the receiver. The only tool needed is a standard T-30 Torx bit to tighten the bolts. This receiver requires the patented LMT monolithic barrel assembly which has a low profile gas block with straight gas tube.
COLOR – BLACK
3 in stock
Related products
-
HSGI COBRA® 1.75″ Rigger Belt Multicam Large
$203.00Sewn with strength and attention to detail, this belt is equipped with the proven quick-release COBRA® buckle and is available with a sewn-in or integrated D-ring. The interior loop fastener is designed to match up with our Sure-Grip® Padded Belts or ABM pouches to lock the belt or pouches into place.
• Constructed with two layers of 1.75″ Type 13 webbing
• Additional rigidity and stiffness are added with a proprietary adhesive before sewing
• Buckle color matches belt (IDR buckle is always black)*Use actual measurements and not pant size when picking your belt size*
Small – 28″-30″
Medium – 32″-34″
Large – 36″-38″
XL – 40″-42″
2X – 44″-46″
3X – 48″-50″Covered by HSGI’s® Lifetime Warranty. Made in the USA.
**HSGI’s® rigger belts are NOT labeled or certified for climbing or use as Life Saving Equipment. HSGI® will not be held responsible for any injuries or death for the misuse of any of our products.**
-
KAC 34mm Extended Eye Relief 1-Piece Scope Mount
This KAC 34mm Extended Eye Relief 1-Piece Scope Mount is constructed of lightweight aluminum and is compatible with any Picatinny-type top rail. It is canted forward to allow for greater eye relief when using a large variable power optic on a rifle with limited top rail space. Attaches via a pair of 1/2″ bolts.
Ring Size: 34mm
Right Height: 1.5″
Material: Aluminum
Color: Black
-
KAC 30mm Extended Eye Relief Scope Mount, 1.9″ Height
Height: 1.9″
Fits any MIL-STD-1913 rail system.
-
KAC SR-15 E3.2 Field Repair Kit
$190.00The SR-15 Field Repair Kit includes the essential components to keep your rifle running over the long term. Also compatible with SR-16 variants.
Field Repair Kit Contents
(2x) Ejector
(1x) Ejector Roll Pin
(2x) Ejector Spring
(1x) Extractor
(1x) Extractor Pivot Pin
(2x) Extractor Springs, Heavy
(1x) Cam Pin
(1x) Firing Pin
(1x) Firing Pin Retainer Pin
(3x) Gas Rings
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
Reviews
There are no reviews yet.