Sig Sauer ALPHA1 1-INCH STEEL HUNTING MOUNTS
$59.99
Our proprietary steel alloy ALPHA Hunting Rings are machined with an exactness that is both strong yet ductile that allows our rings to form around a riflescope, yet will not damage scope under proper installation. The steel rings are epoxy powder coated to prevent oxidation and resist gun oils, cleaning solutions, and outdoor exposure.
FEATURES:
– Steel 1913 rail styles
– Covered by SIG SAUER’s Infnite Guarantee
AVAILABLE HEIGHT OPTIONS
LOW – 0.85 inches
MEDIUM – 0.94 inches
HIGH – 1.12 inches
*Height is referred to as the center line of the optic to the top of the picatinny rail*
TORQ SPECIFICATIONS
To Rail (T15-TORX): 25in/lbs
To Scope (T15-TORX): 25in/lbs
1 in stock
| Weight | 0.25 lbs |
|---|---|
| Dimensions | 6.5 × 4.75 × 1 in |
| UPC | 798681521753 |
| MPN | SOA10008 |
Related products
-
KAC Picatinny Rail Panel, Black Finish, Picatinny Rail Sections, 3.9″, 6-RIB
$25.32KAC’s iconic Ribbed Rail Panels have seen use all over the globe on US military M4 Carbines. The lightweight polymer panels are ribbed for an enhanced grip, and help insulate the support hand from barrel heat. While originally designed for use on the KAC M4 RIS and M4 RAS rails, these panels are also compatible with many other railed handguards.
Material: Polymer
Ribs: 6
Length: 3.90″
Color: Black, Taupe
-
KAC Picatinny Rail Panel, Black Finish, Picatinny Rail Sections, 3.9″, 9-RIB
$26.59KAC’s iconic Ribbed Rail Panels have seen use all over the globe on US military M4 Carbines. The lightweight polymer panels are ribbed for an enhanced grip, and help insulate the support hand from barrel heat. While originally designed for use on the KAC M4 RIS and M4 RAS rails, these panels are also compatible with many other railed handguards.
Material: Polymer
Ribs: 9
Length: 5.48″
Color: Black, FDE
-
KAC URX 4 IBN Keymod Rail 5.56mm 13.0″ Length
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel.
The URX 4 is currently available for 5.56 rifles in 8.5, 10, 10.75″, 13, and 14.5 lengths, and is equipped with Knights unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. The IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut. This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain.
A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knights Armament Company demonstrates its continuing determination to intelligently design effective products.
Two QD sling swivel sockets built in at the rear of the rail. Includes shim kit and installation wrench.
-
KAC 7-Piece Muzzle Device Shim Set, for SR-25/M110
$32.97This 7-Piece Shim Set is for use in properly timing a flash hider or muzzle brake with KAC ¾-24 threads that index off of the muzzle. Kit includes 7 shims and Rockset adhesive.
Shim Sizes:
Shim set for SR-25/M110 muzzle threads using KAC standard ¾-24 muzzle devices.
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
Reviews
There are no reviews yet.