$1,122.99
SIG SAUER, Inc. is pleased to announce the limited release of the M17-Commemorative Edition of the U.S. Army’s M17 official service pistol, a variant of the SIG SAUER P320. The M17-Commemorative pistol shares the same components, coatings, and markings as the firearm that was awarded the U.S. Army contract for the modular handgun system (MHS).
Only 5,000 M17-Commemorative Edition pistols have been produced for sale, and each SIG SAUER M17-Commemorative pistol is serialized M17-0001 through M17-5000 and includes the Army’s required unique identifier (UID). The M17 is sold in the same cardboard packaging as delivered to the U.S. Army. From the pistol to the packaging, the M17-Commemorative Edition is identical to the U.S. Army’s official M17 service pistol.
“The U.S. Army’s selection of the M17 earned the SIG SAUER P320 a place in history. It’s regarded as one of the world’s most influential firearms as it enters service with America’s Armed Forces across the globe,” said Tom Taylor, Chief Marketing Officer and Executive Vice President, SIG SAUER, Inc. “The M17 is the culmination of SIG SAUER’s steadfast commitment to providing the military with the very best, and our determination to never settle. We are excited that collectors and civilians have an opportunity to participate in this history.”
Upon registration of the M17-Commemorative pistol, the purchaser will receive an official certificate of authenticity and commemorative challenge coin, both with serial numbers matching the purchased M17-Commemorative pistol.
The M17-Commemorative is a 9mm, striker-fired pistol, and comes with two 21-round magazines and one 17-round magazine. The pistol features a coyote-tan PVD coated stainless steel slide with the same optic cut as specified by the MHS contract, coyote-tan colored controls just like the original pistols shipped to the 101st Airborne, and a manual safety. The M17 is equipped with a SIGLITE front night sight and removable Night Sight rear plate. The M17-Commemorative comes with a coyote-tan carry-length grip module.
*PLEASE NOTE*
The optic cut on the P320-M17 guns are cut per the MHS contract, thus are not compatible with the ROMEO 1 optic from SIG SAUER. New SIG Sauer Electro-Optics reflex sights which are compatible with all M17 pistol variations will be released in 2019.
A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety
1 in stock
| Weight | 3.85 lbs |
|---|---|
| Dimensions | 13.25 × 10 × 3.25 in |
| UPC | 798681586318 |
| MPN | M17-COMMEMORATIVE |
The BT APC9 pistol with polymer frame; removable polymer grips; 5.5” barrel; low profile adjustable sights; dual auto-folding, non-reciprocating charging handle; side positioned bolt hold open/release; Magpul M-Lok accessory slots; closed bolt direct blowback system; hydraulic shock absorbing buffer; ambidextrous safety; 33-round magazine; and coyote tan finish.
The B&T APC9K, made up of the highest quality, meticulously machined components fitted with the Swiss-made precision that B&T is known for, brings a new level of performance and adaptability to the APC platform.
At the heart of this pistol’s operation is a hydraulic shock-absorbing buffer system that greatly mitigates recoil and enhances overall accuracy. More features of the BT APC9K include a 9mm-chambered barrel that is just 5.5 inches long; folding low profile adjustable sights for faster target acquisition; a dual auto-folding, non-reciprocating charging handle that hardly snags on loose clothing/equipment; ambidextrous controls including a safety selector switch; as well as improved lower receiver ergonomics including a flattop Picatinny rail for optics, an under-barrel rail for lights/lasers, a side positioned bolt hold open/release, and removable M4-compatible grips.
Shipped with a 33-round extended magazine, this B&T APC9K Pro for sale comes with a lower receiver outfitted to also accept widely available Glock magazines. The B&T APC9K Pro Glock magazine-compatible is in addition designed to accept an SB Tactical brace.
The P226 is the pistol that set the standard by which all other combat handguns are measured. Designed as SIG’s entrant in the military trials to replace the 1911, today the P226 is in use by the U.S. Navy SEALs, Federal agents, and numerous law enforcement agencies including the Texas Rangers, Ohio State Highway Patrol and the Michigan State Police to name a few. The exceptional ergonomics and balance make this full-size pistol easy to handle. Available in 9mm and new to 2024, optics ready standard out of the box
This firearm is not available with a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
The P229 Elite Compact model take the same features common to all Elite series pistols and combine them with the ergonomic one-piece grips. The P229 Elite Compact builds on the exceptional reputation of out-of-the-box accuracy with the addition of SIG’s Short Reset Trigger or SRT. The SRT provides you the same great safety and smooth action of the SIG DA/SA with a comfortable short reset for faster trigger return and surgical control during high speed shooting. The P229 Elite Compact features a Beavertail frame, front strap checking and comes with SIGLITE Night Sights, and new to 2024, optics ready standard out of the box.
This firearm is not available with a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
Optic-Ready Steel Slide With Front and Rear Cocking Serrations
Alloy Frame with Beavertail and Accessory Rail
One-Piece Ergonomic Polymer Grip
DA/SA Short-Reset Trigger
SIGlite Night Sights
(2) 15-Round or (2) 10-Round Steel Magazines
KAC’s newest answer for a superior rifle suppressor 3D printed and incorporating their Pressure Reduction Technology (PRT)
KAC PN 119354-BLK & 119354-FDE
Connects to all 5.56 QDC Muzzle Devices. Available in Black and Flat Dark Earth (-BLK) (-FDE).
Specifications
Addition to Bare Muzzle: 3.85″ (9.78cm)
Addition to QDC 3-prong FH: 2.33″ (5.92cm)
Overall Length: 4.43″ (11.25cm)
Weight: 13.9oz (395g)
Sound Reduction: 12dB
Reviews
There are no reviews yet.