Sig Sauer P220 ELITE
The modern SIG SAUER pistol story began with the P220. In 1976 the .45 ACP P220 was introduced and quickly became recognized as one of “the most accurate 45s right out of the box.” Since that time the P220 has earned an enviable record in hot spots around the world. The P220 features a stainless steel slide machined from barstock and coated with a durable, wear-resistant Nitron finish, light-weight alloy frame with integral accessory rail, and the SIG SAUER four-point safety system of decocking lever, patented automatic firing pin safety block, safety intercept notch, and trigger bar disconnector. New to 2024, optics ready standard out of the box.
This firearm is equipped with a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
Optic Ready With Deltapoint/RMR Pattern with SIGlite Day/Night Sights
Nitron Coated Stainless Steel Slide with Front and Rear Cocking Serrations
Alloy Frame with Beavertail and Accessory Rail
Ergonomic One Piece Polymer Grip
(2) 8rd Steel Magazines
Out of stock
Email when stock available
| Weight | 3.85 lbs |
|---|---|
| Dimensions | 13.25 × 10 × 3.25 in |
| UPC | 798681402144 |
| MPN | 220R-45-BSE |
Related products
-
KAC SR-25 Complete Lower Receiver Assembly
The long-awaited SR-25 standalone complete lower receiver assembly is here!
These are built complete to the same exacting standards and specifications as those on complete SR-25 rifles. An ambidextrous bolt release, selector, and magazine release offer the left-handed user the ergonomic advantages inherent to AR15 based controls, as well as giving right-handed users alternate methods of manipulation to increase efficiency of movement. The Drop-In 2-Stage Trigger serves double duty as an aid to long range precision marksmanship while enabling surgical speed shooting at close range.
Marked “RIFLE 7.62 MM” and “SR 25”
Lower ships fully built with lower parts, HH buffer (PN 21057), action spring and trigger, but without stock.
-
B&T APC40Pro .40 S&W Pistol w/Glock Lower, (1) Glock Mag & Tri-Lug Adapter
$2,598.00As one of the flagships of B&T, the APC PRO line represents a breakthrough in customization and modularity on a pistol-caliber platform. Every component is of the highest quality, and is meticulously machined and fitted with the Swiss-made precision that B&T is known for. The APC PRO itself is equipped with several major upgrades such as enhanced lower receiver ergonomics and a side positioned bolt hold open/release. The APC PRO also sports a non-reciprocating, auto-folding charging handle to reduce the risk of snagging on loose clothing/equipment. At the heart of the APC system is the hydraulic shock-absorbing buffer system which greatly mitigates recoil and enhances overall accuracy. In terms of customization, the APC PRO features a flattop picatinny rail for optics as well as a an under-barrel rail for lights/lasers. Each APC PRO unit also has a variety of B&T made accessories including brass-catchers, extended magazines, and fore-grips designed specifically for that model. In addition, many aspects of the APC PRO are reminiscent of the AR-15, such as the ambidextrous selector switch, the ergonomics, trigger assembly and accepts AR-15 style grips. These similarities make for a better shooting experience for someone already acquainted with the AR-15. This APC9 PRO-G’s lower receiver has also been outfitted to accept the widely available Glock magazines, including the 22 round extended magazine.
Features of the B&T APC9K PRO:
Non-reciprocating, auto-folding charging handle
Hydraulic shock absorbing buffer
Ambidextrous safety
Accessories available -
Sig Sauer P226 ELITE
$999.99The P226 is the pistol that set the standard by which all other combat handguns are measured. Designed as SIG’s entrant in the military trials to replace the 1911, today the P226 is in use by the U.S. Navy SEALs, Federal agents, and numerous law enforcement agencies including the Texas Rangers, Ohio State Highway Patrol and the Michigan State Police to name a few. The exceptional ergonomics and balance make this full-size pistol easy to handle. Available in 9mm and new to 2024, optics ready standard out of the box
This firearm is not available with a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
-
Sig Sauer P220 LEGION 10MM
$1,599.99The P220 LEGION is an enhanced version of the gun that started it all for modern day SIG. Finished in a proprietary LEGION gray coating and featuring custom G-10 grips with a LEGION medallion, the P220 LEGION is improved in nearly every way. The stainless-steel slide sports SIG SAUER Electro-Optics X-RAY high visibility day/night sights as well as front cocking serrations that provide greater purchase for cycling the action, clearing the firearm or conducting press checks.
The P220 in DA/SA includes a reduced and contoured Elite beavertail, which allows for a higher grip and a reduced profile, thus eliminating printing. More aggressive front strap checkering and additional checkering under the trigger guard enhance the grip. An X-Five undercut has been applied to the trigger guard, allowing for a higher grip and greater control. The P220 LEGION also features low-profile decocking and slide-catch levers to reduce the risk of snagging. An enhanced polished action with the SRT (Short-Reset Trigger) is augmented with a Grayguns, Inc. designed P-SAIT trigger. In addition, a solid steel guide rod adds weight where it matters most. The P220 LEGION ships with three 8-round magazines.
This firearm is equipped with a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
Reviews
There are no reviews yet.