$1,133.00
The P220 LEGION is an enhanced version of the gun that started it all for modern day SIG. Finished in a proprietary LEGION gray coating and featuring custom G-10 grips with a LEGION medallion, the P220 LEGION is improved in nearly every way. The stainless-steel slide sports SIG SAUER Electro-Optics X-RAY high visibility day/night sights as well as front cocking serrations that provide greater purchase for cycling the action, clearing the firearm or conducting press checks.
The P220 in DA/SA includes a reduced and contoured Elite beavertail, which allows for a higher grip and a reduced profile, thus eliminating printing. More aggressive front strap checkering and additional checkering under the trigger guard enhance the grip. An X-Five undercut has been applied to the trigger guard, allowing for a higher grip and greater control. The P220 LEGION also features low-profile decocking and slide-catch levers to reduce the risk of snagging. An enhanced polished action with the SRT (Short-Reset Trigger) is augmented with a Grayguns, Inc. designed P-SAIT trigger. In addition, a solid steel guide rod adds weight where it matters most. The P220 LEGION ships with three 8-round magazines.
Also Available:
• P220 LEGION 10mm DA/SA
This firearm is equipped with a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
3 in stock
Weight | 0.3 lbs |
---|---|
Dimensions | 9.75 × 4.25 × 2 in |
UPC | 798681591398 |
MPN | W220R-45-LEGION |
QD socket mount to move sling rearward on the handguard while maintaining the lowest possible profile.
Connects to all 7.62 QDC Muzzle Devices. Available in Black and Flat Dark Earth (-BLK) (-FDE).
Specifications
Addition to Bare Muzzle: 5.7″ (16cm)
Overall Length: 6.4″ (20.06cm)
Weight: 19.8oz (658g)
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel.
The URX 4 is currently available for 5.56 rifles in 8.5, 10, 10.75″, 13, and 14.5 lengths, and is equipped with Knights unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. The IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut. This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain.
A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knights Armament Company demonstrates its continuing determination to intelligently design effective products.
Two QD sling swivel sockets built in at the rear of the rail. Includes shim kit and installation wrench.
Knight’s Armament crest logo embroidered on the left side and Knight’s Armament embroidered on the right side. Velcro located on front, top and on the back. These are fully customizable with your own patches. Available in black, green, and tan.
Reviews
There are no reviews yet.