The new P226-XFIVE LEGION represents the pinnacle in design and engineering excellence. Featuring SIG SAUER’s innovative slide-integrated expansion chamber for reduced recoil and the all-new AX3 three-way, fully-adjustable, flat-faced trigger for complete control. The P226-XFIVE LEGION also features suppressor height XRAY3 front and adjustable rear sights and the signature Cerakote Elite LEGION Gray finished frame and optic-ready slide, fitted with custom LEGION TXG grips. The new P226-XFIVE LEGION is truly the ultimate addition to the LEGION.
LEGION Gray Slide with Integrated Expansion Chamber
LEGION Pattern Black TXG Grip Panels with Magwell
Flat Face AX3 Fully Adjustable Trigger System
Suppressor-Height XRAY3 Front and Adjustable Rear
(3) 20-Round Magazines with Alloy Basepads or (3) 10-Round Magazines
This firearm is equipped with a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
Out of stock
Weight | 3.85 lbs |
---|---|
Dimensions | 13.25 × 10 × 3.25 in |
UPC | 798681639755 |
MPN | 226X5-9-LEGION |
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel. The URX 4 is currently available for 5.56 rifles in 8.5″, 10″, 10.75″, 13″, and 14.5″ lengths, and is equipped with Knight’s unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. Th IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut.
This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain. A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knight’s Armament Company demonstrates its continuing determination to intelligently design effective products. It is not suggested to use this rail with a 14.5″ or shorter barrel unless using a muzzle device such as the AAC flash hider which can be installed from the end with a tool.
The KAC URX 4 Rail is a fully modular design that utilizes the revolutionary KeyMod accessory mounting system. The URX 4 Rail is stronger and more stable than previous URX designs due to its one piece construction. It is also lighter due to its Integral Barrel Nut (IBN) system of attachment. The IBN system allows the rail itself to act as the barrel nut when torqued onto the rifle, completely eliminating the need for a separate steel barrel nut. KeyMod accessories may be mounted anywhere along the URX 4Â’s length, making it one of the most user configurable designs on the market. The URX 4 includes two QD sling swivel sockets, one on the left side and one on the right.
Specifications:
Length: 10.75″
Weight: 10.2 oz
Inside Diameter: 1.55″
Outside Diameter: 1.68″ (Side to Side)
Each URX 4 Rail comes complete with an installation wrench, shim kit and instructions. Other lengths available include 8.5″, 10″, 13″, and 14.5″.
Pack of two Velcro-backed PVC patches of the KAC Crest. These rugged patches are available in three different color schemes and couple perfectly with any KAC Gear equipped with hook and loop fasteners. Size is approx. 2″
Keymod mounted, 7-slot MILSTD 1913 picatinny rail segment. Fits the KAC URX 4 or other Keymod-style rails.
This KAC Keymod Accessory Rail is 3.7″ in length and provides a 7 slot section of mil-spec M1913 Picatinny rail for the addition of tactical accessories. Designed specifically for the URX 4 handguard, this rail section is also compatible with any other rifle handguard that has a Keymod interface. Aluminum construction.
Specifications:
Overall Length: 3.7″
M1913 Picatinny Rail Slots: 7
Reviews
There are no reviews yet.