$649.99
The P938 BRG finish with black Hogue rubber grips offers the ballistic advantage of the 9mm cartridge in a platform similar in size to the best-selling P238 pistol. The stainless steel slide features the popular trademarked SIG SAUER slide serrations, corrosion resistant edge finish and SIGLITE Night Sights. A single-action-only trigger, coupled with full-size SIGLITE Night Sights makes the P938 handle like a much larger pistol, yet is still easy to carry concealed. With dimensions just slightly larger than its .380ACP counterpart, the P938 packs seven plus one rounds of 9mm into an all-metal frame. The single-action trigger gives the P938 unmatched accuracy in a pistol its size. Fans of the 1911 will find the thumb safety, magazine release and slide stop lever in familiar places. An ambidextrous safety makes the P938 easy for left- and right-handed shooters.
This firearm is equipped with a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
1 in stock
Weight | 2.2 lbs |
---|---|
Dimensions | 10.25 × 7.75 × 3 in |
UPC | 798681443352 |
MPN | 938-9-BRG-AMBI |
The KAC Keymod Flat Panel Kit includes a set of seven 5.5” polymer rail panels. Each textured panel snaps securely to any bare section of Keymod equipped rail, providing a more positive gripping surface and also insulating the support hand from barrel heat. These rail panels are very thin adding almost no width to the handguard. While designed for the URX 4 rail, these panels will also fit any other rifle handguard that has a Keymod interface.
Specifications:
Color: Black, FDE, Tan or Taupe
Panel Length: 5.5″
Material: Polymer
Quantity: 7
Model: P/N:31190-BLK, 31190-TAN, 31190-TAU
Manufactured by: Knight’s Armament Company
Note On Colors: Tan and Taupe are Knight’s Armament colors, Flat Dark Earth is a match to Magpul FDE
Height: 1.9″
Fits any MIL-STD-1913 rail system.
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel. The URX 4 is currently available for 5.56 rifles in 8.5″, 10″, 10.75″, 13″, and 14.5″ lengths, and is equipped with Knight’s unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. Th IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut.
This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain. A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knight’s Armament Company demonstrates its continuing determination to intelligently design effective products. It is not suggested to use this rail with a 14.5″ or shorter barrel unless using a muzzle device such as the AAC flash hider which can be installed from the end with a tool.
Knight’s Armament crest logo embroidered on the left side and Knight’s Armament embroidered on the right side. Velcro located on front, top and on the back. These are fully customizable with your own patches. Available in black, green, and tan.
Reviews
There are no reviews yet.