Sig Sauer Parts Kit, P220, .45ACP
Buy the SIG SAUER Parts Kit to perform periodic maintenance on your most prized SIG pistols. The kits include a selection of the most often requested replacement parts for all SIG SAUER Pistols. Kits include: Decocking Lever Spring, Slide Catch Lever Spring, Trigger Bar Spring, Recoil Spring, Slide Pins and Grip Screws. NOTE: Kits for P220, P225, P232 and P245 also include washers with the grip screws.
Installation of these parts kits require disassembly of your firearm beyond a “field-stripped” condition. Improper installation may result in malfunction, serious injury, or death. SIG SAUER requires that only certified SIG SAUER armorers install these parts kits. Any damage caused by the incorrect installation of these parts kits are not covered by your firearm’s warranty, and SIG SAUER will charge for any needed repairs to a firearm damaged by improper use or installation of these parts kits.
WARNING: These parts kits are intended to be installed as a full unit. Any substitution of included parts may be incompatible and may lead to malfunction, serious injury, or death.
Out of stock
Email when stock available
| Weight | 0.1 lbs |
|---|---|
| Dimensions | 7 × 4 × 1 in |
| UPC | 1246000000000 |
| MPN | 220-45-PKIT |
Related products
-
KAC 34mm KAC EER MOD 1
$370.04Scope mount for day optics.1.94″ right height and forward position for extended eye relief. One piece construction.
Ring Size: 34mm
Right Height: 1.94″
Weight: 7.4oz
-
KAC Tan Velcro Hat
$25.00Knight’s Armament crest logo embroidered on the left side and Knight’s Armament embroidered on the right side. Velcro located on front, top and on the back. These are fully customizable with your own patches. Available in black, green, and tan.
-
KAC Picatinny Rail Panel, Black Finish, Picatinny Rail Sections, 3.9″, 6-RIB
$25.32KAC’s iconic Ribbed Rail Panels have seen use all over the globe on US military M4 Carbines. The lightweight polymer panels are ribbed for an enhanced grip, and help insulate the support hand from barrel heat. While originally designed for use on the KAC M4 RIS and M4 RAS rails, these panels are also compatible with many other railed handguards.
Material: Polymer
Ribs: 6
Length: 3.90″
Color: Black, Taupe
-
KAC URX 4 IBN Keymod Rail 5.56mm 13.0″ Length
URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel.
The URX 4 is currently available for 5.56 rifles in 8.5, 10, 10.75″, 13, and 14.5 lengths, and is equipped with Knights unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. The IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut. This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain.
A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knights Armament Company demonstrates its continuing determination to intelligently design effective products.
Two QD sling swivel sockets built in at the rear of the rail. Includes shim kit and installation wrench.
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
Reviews
There are no reviews yet.