![Logo_High Rez_KFA Primary Logo [Color]](https://kfarmorystg.wpenginepowered.com/wp-content/uploads/2024/03/Logo_High-Rez_KFA-Primary-Logo-Color.png#106031){kind=logo}
Sig Sauer SIG MCX SPEAR LT 9-INCH 300BLK BARREL AND GAS BLOCK ASSEMBLY
$739.99
Genuine replacement barrel for the 9″ 300BLK SPEAR LT. Complete with barrel and gas block assembly.
*Please Note: All NFA rules apply to the installation of these upper assemblies to lower receivers and caliber exchange kits to upper receivers. Upper assemblies and caliber exchange kits with barrel lengths less than 16″ may only be affixed to lower receivers that (1) are not recorded as a rifle lower by the manufacturer and do not have a stock attached to the lower receiver or (2) registered with the BATFE as a short-barreled rifle (SBR). Please check with your local and state municipalities for any further regulatory requirements. It is your responsibility as the buyer of these components to make sure you comply with all NFA rules and applicable laws.
1 in stock
Related products
-
KAC Rear Sight Peep Aperture Insert, 300 Meter
$2.81This KAC Aperture Sight Insert snaps into a 300 Meter Flip Up Rear Sight, constricting the peep aperture for a more precise sight picture.
-
KAC 34mm Extended Eye Relief 1-Piece Scope Mount
$388.55This KAC 34mm Extended Eye Relief 1-Piece Scope Mount is constructed of lightweight aluminum and is compatible with any Picatinny-type top rail. It is canted forward to allow for greater eye relief when using a large variable power optic on a rifle with limited top rail space. Attaches via a pair of 1/2″ bolts.
Ring Size: 34mm
Right Height: 1.5″
Material: Aluminum
Color: Black
-
KAC URX 4 IBN Keymod Rail 5.56mm 8.5″ Length
$213.44URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel. The URX 4 is currently available for 5.56 rifles in 8.5, 10, 10.75″, 13, and 14.5 lengths, and is equipped with Knights unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. Th IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut.
This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain. A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knights Armament Company demonstrates its continuing determination to intelligently design effective products.
-
KAC URX 4 IBN Keymod Rail 5.56mm 14.5″ Length
$302.15URX 4 The URX 4 is a continuous top-rail system that utilizes the Keymod mounting brackets developed by Vltor and Noveske. This rail system is built stronger and more stable than previous designs due to the absence of a removable bottom rail. The modular layout allows an end user to fully customize exactly where to place accessories without the use of specialized tools, small parts, or additional forces applied to the barrel. The URX 4 is currently available for 5.56 rifles in 8.5″, 10″, 10.75″, 13″, and 14.5″ lengths, and is equipped with Knight’s unique IBN mounting configuration. The idea was to create a more modular, and thus more serviceable, rail system that still maintains its strength and stiffness. Th IBN system torques the rail onto the weapon and allows the rail to act as the barrel nut.
This design was developed to increase stabilization and provide a simpler solution that requires less specialized tools to install and maintain. A full array of modular accessories, iron sights, and panel kits utilizing the Keymod mounting brackets have been developed specifically to accompany this rail system. With the introduction of the URX 4, Knight’s Armament Company demonstrates its continuing determination to intelligently design effective products. It is not suggested to use this rail with a 14.5″ or shorter barrel unless using a muzzle device such as the AAC flash hider which can be installed from the end with a tool.
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
Reviews
There are no reviews yet.