$79.90
The SilencerCo ASR Flash Hider significantly suppresses muzzle flash, safeguarding the shooter’s vision, especially in low-light environments. Engineered for maximum effectiveness, this flash hider keeps your shots discreet and on target. Enhance your shooting experience with reduced flash signature and superior control. Additionally, the SilencerCo Flash Hider utilizes a patent-pending resonance suppression method that effectively eliminates the tuning-fork effect common with competing 3-prong Flash Hiders.
The SilencerCo ASR Flash Hider has the added benefit of being compatible with the SilencerCo ASR Mount, which you can thread over the top of this flash hider for a quick mount option. With multiple thread and caliber options of muzzle brakes, you can quickly and effectively shoot suppressed on multiple platforms. The ASR mount is one of the best performing suppressor mounting systems available today. See the size chart below to find the correct ASR Mount for your silencer.
New *RAW Finish – Same durability and corrosion resistance, but with the popular heat treated finish.
ASR Mounts:
Alpha: Harvester 300, Omega K Series, and Octane Series
Bravo: Harvester EVO, Hybrid 46, Harvester 338, Omega 300, and Scythe-Ti
Charlie: Saker ASR Series, Chimera 300, Omega 36M, and Hybrid 46M
4 in stock
Weight | 1 lbs |
---|---|
Dimensions | 6.5 × 4.5 × 1.5 in |
UPC | 817272010329 |
MPN | AC141 |
Sewn with strength and attention to detail, this belt is equipped with the proven quick-release COBRA® buckle and is available with a sewn-in or integrated D-ring. The interior loop fastener is designed to match up with our Sure-Grip® Padded Belts or ABM pouches to lock the belt or pouches into place.
• Constructed with two layers of 1.75″ Type 13 webbing
• Additional rigidity and stiffness are added with a proprietary adhesive before sewing
• Buckle color matches belt (IDR buckle is always black)
*Use actual measurements and not pant size when picking your belt size*
Small – 28″-30″
Medium – 32″-34″
Large – 36″-38″
XL – 40″-42″
2X – 44″-46″
3X – 48″-50″
Covered by HSGI’s® Lifetime Warranty. Made in the USA.
**HSGI’s® rigger belts are NOT labeled or certified for climbing or use as Life Saving Equipment. HSGI® will not be held responsible for any injuries or death for the misuse of any of our products.**
Height: 1.9″
Fits any MIL-STD-1913 rail system.
Picatinny rail scope cap allows for attaching accessory sighting systems.
SR-25 URX wrench. This wrench is required when installing a URX rail system on an SR-25 rifle. Not for use with SR-15 rifles. For the SR-15 URX wrench, use PN:20495.
Reviews
There are no reviews yet.