Staccato C 4.0 X-Series Optics Ready Handgun
$3,029.00
The Staccato C is the latest introduction to the Staccato family of 2011® handguns. It features a 4″ barrel, aluminum frame and all the innovations introduced with its smaller, 3.5″ sibling, the Staccato CS.
The Staccato C is available in either a compact grip, holding a 15-round magazine or a full-size grip, holding a 17-round magazine. Both grips are slim for maximum concealability.
With this design, the Staccato C is small enough for concealed carry and big enough for duty and defense. It’s All Purpose, Staccato.
For California, if you are not an active law enforcement officer, you cannot purchase any Staccato firearm.
1 in stock
| Weight | 4.75 lbs |
|---|---|
| Dimensions | 13 × 10 × 3 in |
| UPC | 0816781018574 |
| MPN | 15-1501-000112-01 |
Related products
-
B&T APC9K Pro Pistol 9mm Glock Compatible Coyote Tan 5.5″ Barrel 33 Round
$2,520.00The BT APC9 pistol with polymer frame; removable polymer grips; 5.5” barrel; low profile adjustable sights; dual auto-folding, non-reciprocating charging handle; side positioned bolt hold open/release; Magpul M-Lok accessory slots; closed bolt direct blowback system; hydraulic shock absorbing buffer; ambidextrous safety; 33-round magazine; and coyote tan finish.
The B&T APC9K, made up of the highest quality, meticulously machined components fitted with the Swiss-made precision that B&T is known for, brings a new level of performance and adaptability to the APC platform.
At the heart of this pistol’s operation is a hydraulic shock-absorbing buffer system that greatly mitigates recoil and enhances overall accuracy. More features of the BT APC9K include a 9mm-chambered barrel that is just 5.5 inches long; folding low profile adjustable sights for faster target acquisition; a dual auto-folding, non-reciprocating charging handle that hardly snags on loose clothing/equipment; ambidextrous controls including a safety selector switch; as well as improved lower receiver ergonomics including a flattop Picatinny rail for optics, an under-barrel rail for lights/lasers, a side positioned bolt hold open/release, and removable M4-compatible grips.
Shipped with a 33-round extended magazine, this B&T APC9K Pro for sale comes with a lower receiver outfitted to also accept widely available Glock magazines. The B&T APC9K Pro Glock magazine-compatible is in addition designed to accept an SB Tactical brace.
-
Sig Sauer P322
Introducing the new P322. With an unprecedented 20+1 round capacity, the new P322 gives you 21 reasons to love 22.
The new P322 was completely designed and built by SIG SAUER in New Hampshire and is loaded with premium features, including an optic-ready removable rear sight plate so you can easily add a ROMEOZero red dot optic without the use of adapter plates. The P322 also comes with a threaded barrel adapter making it suppressor ready right out of the box, and with its ambidextrous controls, interchangeable flat and curved triggers, and fiber optic front and rear sights the new P322 is the highest capacity, most advanced 22 pistol in its class.
20 Round Magazine Capacity
Optic Ready Removable Rear Sight Plate
Suppressor-Ready With Included Threaded Barrel Adapter
Interchangeable Trigger Shoes (flat and curved included)
Fiber Optic Front and Rear Sights
Ambi Controls With Reversible Magazine Catch
Magazine Loader Included
Includes (2) 20rd magazines
This firearm is equipped with a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
-
Sig Sauer 1911 Fastback Nightmare Carry
$1,299.99The legendary 1911 design has been brought into the 21st century with the refinements today’s shooters demand. The 1911 Fastback Carry Nightmare pistol features a stainless steel frame with rounded grip and mainspring housing. Each pistol is built using premium internal parts including a match grade barrel, hammer/sear set and trigger. The all Nitron coated frame and slide is contrasted with natural stainless controls, barrel bushing, extractor and grips screws. The Nightmare is finished with a set of black G10 double diamond grips that makes this 1911 SIG SAUER looks as good as it performs.
This firearm is equipped with a manual safety. A manual safety – when engaged – is designed to mechanically prevent the firearm from discharging when the trigger is pressed, either intentionally or unintentionally. You should consider whether a manual safety on a handgun is right for you based on your experience level and intended use, keeping in mind best practices for safe firearms handling. It is possible for the trigger to be unintentionally pressed even under normal handling circumstances.
A manual safety is designed to augment, not replace, safe firearm handling practices. You are responsible to protect against unintentional trigger movement while carrying any firearm. Even if you elect to purchase a pistol equipped with a manual safety, you must ensure that the trigger is not contacted in any circumstance other than when you intend to fire the pistol, particularly if you elect to carry your pistol with a round in the chamber. If you have a round in the chamber and the trigger is pressed to the rear, the pistol will fire, absent an engaged manual safety.
-
KAC 5.56mm QDC/MCQ-PRT Suppressor – FDE [NFA]
$1,645.88KAC’s newest answer for a superior rifle suppressor 3D printed and incorporating their Pressure Reduction Technology (PRT)
KAC PN 119354-BLK & 119354-FDEConnects to all 5.56 QDC Muzzle Devices. Available in Black and Flat Dark Earth (-BLK) (-FDE).
Specifications
Addition to Bare Muzzle: 3.85″ (9.78cm)
Addition to QDC 3-prong FH: 2.33″ (5.92cm)
Overall Length: 4.43″ (11.25cm)
Weight: 13.9oz (395g)
Sound Reduction: 12dB
![KAC 5.56mm QDC/MCQ-PRT Suppressor - FDE [NFA]](https://kfarmory.com/wp-content/uploads/2024/10/KAC_119354-FDE_556-QDC-MCQ-PRT-Suppressor-FDE-WEB.jpg)
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
Reviews
There are no reviews yet.