![KFA_2025_Classic Logo_Red [HIREZ-FINAL01]](https://kfarmory.com/wp-content/uploads/2025/06/KFA_2025_Classic-Logo_Red-HIREZ-FINAL01-1-scaled.png#117002){kind=logo}
Sig Sauer Parts Kit, P220, .45ACP
Buy the SIG SAUER Parts Kit to perform periodic maintenance on your most prized SIG pistols. The kits include a selection of the most often requested replacement parts for all SIG SAUER Pistols. Kits include: Decocking Lever Spring, Slide Catch Lever Spring, Trigger Bar Spring, Recoil Spring, Slide Pins and Grip Screws. NOTE: Kits for P220, P225, P232 and P245 also include washers with the grip screws.
Installation of these parts kits require disassembly of your firearm beyond a “field-stripped” condition. Improper installation may result in malfunction, serious injury, or death. SIG SAUER requires that only certified SIG SAUER armorers install these parts kits. Any damage caused by the incorrect installation of these parts kits are not covered by your firearm’s warranty, and SIG SAUER will charge for any needed repairs to a firearm damaged by improper use or installation of these parts kits.
WARNING: These parts kits are intended to be installed as a full unit. Any substitution of included parts may be incompatible and may lead to malfunction, serious injury, or death.
Out of stock
Email when stock available
| Weight | 0.1 lbs |
|---|---|
| Dimensions | 7 × 4 × 1 in |
| UPC | 1246000000000 |
| MPN | 220-45-PKIT |
Related products
-
KAC 34mm KAC EER MOD 1
$370.04Scope mount for day optics.1.94″ right height and forward position for extended eye relief. One piece construction.
Ring Size: 34mm
Right Height: 1.94″
Weight: 7.4oz
-
KAC Tan Velcro Hat
Knight’s Armament crest logo embroidered on the left side and Knight’s Armament embroidered on the right side. Velcro located on front, top and on the back. These are fully customizable with your own patches. Available in black, green, and tan.
-
KAC Picatinny Rail Panel, Black Finish, Picatinny Rail Sections, 3.9″, 9-RIB
$26.59KAC’s iconic Ribbed Rail Panels have seen use all over the globe on US military M4 Carbines. The lightweight polymer panels are ribbed for an enhanced grip, and help insulate the support hand from barrel heat. While originally designed for use on the KAC M4 RIS and M4 RAS rails, these panels are also compatible with many other railed handguards.
Material: Polymer
Ribs: 9
Length: 5.48″
Color: Black, FDE
-
KAC Folding Micro Rear Sight, 200-600 Meter Adjustable
$181.50KAC’s line of Micro Iron Sights are currently in use by the United States Army, Marine Corps and numerous law enforcement agencies worldwide. This is because they are built to exacting tolerances, maintain their zero under adverse conditions and, when folded, have one of the lowest profile top-rail footprints in the industry. Our highly versatile 200-600 Meter Micro Rear Sight features a finger-adjustable, rotating drum that enables shooters to engage targets from 200 to 600 meters with both speed and accuracy.
Specifications:
Material: Steel
Elevation Adjustable: Yes
Windage Adjustable: Yes
Zeroing Tips:
25/300 Meter Zero: Place a target 25 meters down range. Turn the rear sight drum to the ‘Z’ setting and fire a 3 round group(s). Adjust the front sight post and rear sight windage knob until the desired point-of-aim/point-of-impact is achieved. If possible, turn the rear sight drum to the ‘3’ setting and confirm zero at 300 meters. 50/200 Meter Zero: Place a target 50 meters down range. Turn the rear sight drum to the ‘2’ setting and fire a 3 round group(s). Adjust the front sight post and rear sight windage knob until the desired point-of-aim/point-of-impact is achieved. If possible, place a target 200 meters down range and confirm zero.
SUBSCRIBE OUR NEWSLETTER AND GET UNLIMITED PROFITS
Reviews
There are no reviews yet.